Menu

GIGABYTE Aorus GeForce RTX 3080 Xtreme Waterforce WB-10G Graphics Card 10GB GDDR6X | GV-N3080AORUSX WB-10GD

$1,215.00

GV-N3080AORUSX WB-10GD identifies the AORUS RTX 3080 XTREME WATERFORCE WB 10G water-block graphics card. It requires a compatible custom liquid-cooling loop. Confirm the actual revision, block condition, external cooling components and packing scope.

BrandGIGABYTESKUGPU-XTREME-WATERFORCE-WB-10GCategoryGIGABYTEAlso inGraphic Cards

Explore Related

Related products, categories and research.

GV-N3080AORUSX WB-10GD · Custom-loop model

AORUS RTX 3080 Waterforce WB 10G overview

AORUS RTX 3080 Waterforce WB 10G is the custom-loop model identified by GV-N3080AORUSX WB-10GD. It uses a water block and requires a compatible custom cooling loop. Do not confuse the WB model with the separately identified WATERFORCE W model or assume a radiator and pump accompany this listing.

GIGABYTE publishes revision 1.0 and 2.0 pages under this product code. The offered revision remains unconfirmed. Match the actual board label before selecting revision-specific software or making assumptions about features that differ between revisions.

AORUS RTX 3080 Waterforce WB 10G reference water-block card with illuminated trim beside its box
Water-block card and packaging reference view; actual condition, revision and supplied cooling components require confirmation.

AORUS RTX 3080 Waterforce WB 10G cooling features

Custom-loop cooling

The model is designed around a water block. Its cooling arrangement needs to be assessed as part of the complete loop, including compatible materials, connections and heat-removal capacity.

Leak-detection design

GIGABYTE describes a water-block leak-detection circuit. This design feature does not establish that the offered unit is leak-free, recently tested or ready for installation.

Display flexibility

The connector panel offers both HDMI and DisplayPort. Check the version of each selected output, especially the middle HDMI connector, before planning a monitor setup.

GV-N3080AORUSX WB-10GD reference front view showing the block face and fitting terminal
Block face and fitting-terminal reference view. Confirm the actual port condition and installed connection arrangement.

Custom-cooled desktop integration

Planning the complete loop

List the loop components already installed in the intended desktop and identify what must be supplied separately. The block needs a suitable heat-removal path through the complete system. A matching port thread does not establish that a particular pump, radiator, reservoir or coolant combination is suitable.

The published G1/4 fitting type concerns the port connection. Tube dimensions and the selected fitting design are separate choices. Check the fitting manufacturer’s specified tubing dimensions, sealing arrangement and clearance around the terminal. Do not infer tube size from the G1/4 designation or assume the illustrated fittings are included. The Koolance fitting and tubing terminology FAQ explains these general selection terms; it is not a compatibility approval for this AORUS block.

Consider the AORUS RTX 3080 Waterforce WB 10G for a desktop whose custom liquid-cooling system can accommodate the actual block, fittings and thermal load. Assess the intended games or creative applications against their GPU, memory and driver requirements. Model specifications do not guarantee performance in a particular workload.

Plan servicing access as well as initial assembly. Check tubing routes, access to drain points and the space needed to disconnect the card without stressing its fittings. Browse other GIGABYTE graphics cards as separately identified alternatives.

AORUS RTX 3080 Waterforce WB 10G specifications

Manufacturer code GV-N3080AORUSX WB-10GD
Offered revision Not confirmed
GPU GeForce RTX 3080
Memory 10 GB GDDR6X; 320-bit
Core clock 1845 MHz
CUDA cores 8704
Memory clock 19000 MHz as published
Memory bandwidth 760 GB/s
Interface PCI Express 4.0 ×16
Card dimensions 252 × 163 × 29 mm
Recommended system PSU 750 W
Power connectors 2 × 8-pin
Water-block fitting type G1/4 inch
Outputs 3 × DisplayPort 1.4a; 2 × HDMI 2.1; 1 × HDMI 2.0
Simultaneous displays Up to 4; middle HDMI output supports HDMI 2.0

These figures agree across the manufacturer’s revision 1.0 and 2.0 specification pages. Card dimensions do not account for the installed fittings and external tubing. Measure those connections and the complete route inside the actual enclosure.

Clearance beyond the card body

GV-N3080AORUSX WB-10GD dimension reference illustration marked approximately 9.9 by 6.4 inches
Dimension reference illustration. Use the 252 × 163 × 29 mm specification for planning, then allow additional space for fittings and tubing.

The AORUS RTX 3080 Waterforce WB 10G PSU recommendation concerns the system and does not replace checking the actual power supply, cables and other installed components. Follow the documentation for the identified revision when connecting power and assembling the cooling loop.

Monitor connection planning

Choose the intended socket for each monitor before selecting cables or adapters. The six physical sockets do not increase the four-display limit. In particular, the middle HDMI connection has a different published version from the other two HDMI connections. Match the selected port, monitor input and cable to the required display mode rather than treating all three HDMI sockets as interchangeable for every use.

GV-N3080AORUSX WB-10GD angled reference view showing six display sockets and the water-block terminal
Output-bracket reference view. Check socket identification against the revision-specific manufacturer documentation.

AORUS RTX 3080 Waterforce WB 10G price and condition

Evidence for the offered card

If the offered card has been used, ask for photographs of the block terminal, sealing areas and accessible surfaces, together with the available service history. Separate cosmetic appearance from evidence of electrical operation or loop integrity. A photograph of illuminated trim does not demonstrate cooling performance or show that the assembled system has passed a leak test.

Any supplied AORUS RTX 3080 Waterforce WB 10G test report should identify the actual card or serial reference, test date and scope. A display-output check, a workload check and a cooling-loop leak check answer different questions. Confirm which checks were performed and which remain the responsibility of the installer. Do not treat the model’s leak-detection feature as a substitute for evidence about the offered unit.

Obtain the actual packing list before ordering. Do not assume fittings, tubing, coolant, pump, reservoir or radiator are included. Confirm any supplied installation materials and documentation individually.

Request matching label photographs, the offered condition and functional-test information. For the block, clarify previous coolant use, visible residue or corrosion, and available leak-test evidence. Confirm applicable warranty terms in writing; a historical manufacturer registration offer does not establish this unit’s eligibility.

AORUS RTX 3080 Waterforce WB 10G revision resources

Consult the official GV-N3080AORUSX WB-10GD revision 1.0 product page and GV-N3080AORUSX WB-10GD revision 2.0 product page. These are web references with specification and support navigation, not direct PDF manuals. Match the supplied revision before choosing downloads.

AORUS RTX 3080 Waterforce WB 10G buying questions

Is GV-N3080AORUSX WB-10GD a complete self-contained cooling kit?

The WB model is a water-block card for a custom loop. Confirm every external cooling component in the actual offer.

Do six sockets mean six simultaneous displays?

No. The manufacturer specifies up to four simultaneous displays; the middle HDMI output supports HDMI 2.0.

Does GV-N3080AORUSX WB-10GD prove revision 1.0?

No. Both published revisions use that code. Confirm the revision from the offered board label.

Recently viewed

Add AI Robot Supplier as a preferred source on Google.

WhatsApp Chat with our sales team