Water-block cooling
GIGABYTE describes cooling for the GPU, VRAM and MOSFET areas. The loop must be designed and installed to the exact model’s instructions; a water block does not replace a complete heat-rejection system.
$1,449.86
GIGABYTE AORUS RTX 5080 XTREME WB GV-N5080AORUSX WB-16GD is a 16GB GDDR7 graphics card for a compatible custom liquid-cooling loop. Confirm loop components, coolant, fittings, power cabling and the actual condition and supplied accessories.
Related products, categories and research.
AORUS RTX 5080 WATERFORCE WB, identified by GV-N5080AORUSX WB-16GD, is the XTREME model that combines the GeForce RTX 5080 GPU with a WATERFORCE water block. This WB version is intended for a custom liquid-cooling loop. It is a different cooling arrangement from the W model with its all-in-one radiator assembly.
Identify the complete model code before specifying a build. The card’s published dimensions describe the card itself; they do not establish clearance for fittings, tubing, the power cable or the rest of a cooling loop.

GIGABYTE describes cooling for the GPU, VRAM and MOSFET areas. The loop must be designed and installed to the exact model’s instructions; a water block does not replace a complete heat-rejection system.
The published core clock is 2805 MHz, compared with a 2617 MHz reference figure. Sustained operating frequency depends on workload, temperatures, power and the system configuration.
The model includes RGB lighting and a protective metal back plate. Check the manufacturer’s software and installation requirements for the planned system.

Consider this card for gaming or creative desktop builds that provide a compatible liquid-cooling installation. Check each intended application’s GPU support, memory requirements, driver environment and display configuration. Published component specifications do not guarantee a particular frame rate or completion time.
Compare other GIGABYTE graphics cards as distinct models. An air-cooled or all-in-one alternative can have different mounting, service and space requirements even when it uses the same GPU family.
| Manufacturer code | GV-N5080AORUSX WB-16GD |
|---|---|
| GPU | GeForce RTX 5080 |
| Memory | 16 GB GDDR7; 256-bit; 30 Gbps |
| Core clock | 2805 MHz |
| CUDA cores | 10752 |
| Interface | PCI Express 5.0 |
| Card dimensions | 208 × 156 × 29 mm |
| Cooling | WATERFORCE water block; custom-loop installation |
| Recommended system PSU | 850 W |
| Power connector | 1 × 16-pin |
| Outputs | 3 × DisplayPort 2.1b; 1 × HDMI 2.1b |
| Simultaneous displays | Up to 4 |
GIGABYTE specifies non-corrosive coolant. Confirm suitable coolant, fittings, tubing and the complete loop arrangement from the installation documentation before assembly. Plan access for connections and maintenance, and verify that the chosen case can accommodate the entire installation.

The 850 W value is a system PSU recommendation, not the card’s own consumption. Evaluate other components and use the approved power-cable arrangement. Allow connector clearance and avoid placing strain on cables or coolant connections.

Check how the card will be connected to the rest of the loop before choosing the case layout. Include the space occupied by fittings and the intended tube route, together with access needed to connect or remove them. The 208 mm card length alone does not establish that the completed assembly will fit.
For an existing loop, identify the installed components and coolant before adding the card. Confirm material and coolant suitability from the component documentation rather than relying on the WATERFORCE name. Request available information about the offered block’s previous use, servicing and leak checks; reference photographs cannot establish its internal condition.
The manufacturer’s reference accessory list includes a VGA manual, WATERFORCE water-block installation guide, warranty notice, 12V-2×6 to three PCIe 8-pin adapter, AORUS identity stickers and thermal grease. Confirm the actual packing list and required loop hardware before ordering.
Request matching label photographs and available functional and leak-test information for the offered card. Confirm its condition and written warranty terms. Manufacturer registration promotions and reference photographs do not establish this individual unit’s history, eligibility or included accessories.
Use the official GV-N5080AORUSX WB-16GD specifications and WATERFORCE WB feature and support page. These links are web references with support navigation, not direct PDF manuals. Match the WB code before selecting installation instructions or software.
This is the separate WB water-block model for custom-loop integration. Confirm the actual supplied scope; do not infer an AIO assembly.
No. Include fittings, tubing, power connections and the other loop components in the clearance check.
No. Confirm the actual packing list and the approved PSU cabling in the offer.
Add AI Robot Supplier as a preferred source on Google.
Tell us what you need — we respond within one business day.