iTR Lumbar Passive Assistor is a Robotics Solution from iTR Robot. Purpose: Supports hip and back strength for workers handling heavy construction and logistics materials Power: Passive drive, hybrid module replaceable/expandable Size: 480 mm W × 180 mm D × 720 mm H Weight: 2.7 kg Range of motion: Waist bending angle to.
Review the verified model information, technical details, compatibility, included configuration and documentation before requesting a destination-specific B2B quotation.
Related products, categories and research.
iTR Lumbar Passive Assistor is a Robotics Solution from iTR Robot. Purpose: Supports hip and back strength for workers handling heavy construction and logistics materials Power: Passive drive, hybrid module replaceable/expandable Size: 480 mm W × 180 mm D × 720 mm H Weight: 2.7 kg Range of motion: Waist bending angle to +150° Operation modes: Walking mode, working mode Degrees of freedom: 5 DOF including driving rotation.
iTR Lumbar Passive Assistor is a Robotics Solution from iTR Robot. Purpose: Supports hip and back strength for workers handling heavy construction and logistics materials Power: Passive drive, hybrid module replaceable/expandable Size: 480 mm W × 180 mm D × 720 mm H Weight: 2.7 kg Range of motion: Waist bending angle to +150° Operation modes: Walking mode, working mode Degrees of freedom: 5 DOF including driving rotation.
Summary The iTR Lumbar Passive Assistor is a 2.7-kilogram passive back support exoskeleton designed for construction and logistics workers, providing up to 12 kgf (50 N·m) of assistive torque during heavy material handling through a 5-DOF mechanism with approximately 150-degree waist bending range of motion, two operation modes (walking and working), and a body-type tailored harness with easy detachment.
For procurement, match the exact model or part number, included accessories, configuration and condition to the written quotation before installation or deployment.
Match model, part number and serial or product-label details to the quotation.
Review system, accessory, software, power and facility requirements that apply to this product.
Confirm condition, included items, warranty, documentation and delivery terms before payment.
Use the product media and final exact-unit photographs to confirm configuration and condition before shipment.
The points below summarize model-specific information supported by manufacturer, regulatory or technical documentation.
Purpose: Supports hip and back strength for workers handling heavy construction and logistics materials Power: Passive drive, hybrid module replaceable/expandable Size: 480 mm W × 180 mm D × 720 mm H Weight: 2.7 kg Range of motion: Waist bending angle to +150° Operation modes: Walking mode, working mode Degrees of freedom: 5 DOF including driving rotation and length adjustment Support load: 12 kgf / 50 N·m
Summary The iTR Lumbar Passive Assistor is a 2.7-kilogram passive back support exoskeleton designed for construction and logistics workers, providing up to 12 kgf (50 N·m) of assistive torque during heavy material handling through a 5-DOF mechanism with approximately 150-degree waist bending range of motion, two operation modes (walking and working), and a body-type tailored harness with easy detachment.
Specifications from iTR’s official product page: weight 2.7 kg, dimensions 480 × 180 × 720 mm, passive drive (no battery), 5 degrees of freedom including driving rotation and length adjustment, waist bending range of approximately 150 degrees, two operation modes (walking and working), maximum support load of 12 kgf (50 N·m), and body-type tailored harness with easy detachment structure.
iTR’s official product page at itrobotgroup.com/products_detail/10.html confirms the complete specification table: dimensions 480 × 180 × 720 mm (W × D × H), passive drive with hybrid module replacement and expandability, waist bending range of motion approximately +150 degrees, 5 DOF system, and the confirmed primary markets of construction and logistics.
They require no battery charging, eliminate the risk of electronic component failure in dusty and wet outdoor construction sites, weigh less than active alternatives (the iTR’s 2.7 kg versus typical active exoskeleton weights of 4 to 8 kg or more), and have no operational cost beyond the initial purchase.
Suitability depends on the exact configuration, compatible systems, intended professional use and manufacturer instructions.
Evaluate iTR Lumbar Passive Assistor for the documented robotics workflow supported by its exact hardware, payload and software configuration.
Confirm controller, SDK/API, network interfaces, sensors and supported third-party integrations.
Match payload, mobility, reach, runtime, environment and safety requirements to the intended task.
Confirm charging/power, accessories, training, spare parts and acceptance testing before deployment.
The table summarizes confirmed model and technical information confirmed from product specifications and technical documentation. Configuration-sensitive values should be checked against the exact supplied unit.
Use this checklist to reduce configuration, compatibility and acceptance problems.
Manufacturer and regulatory references are prioritized so buyers can verify identity, compatibility and configuration-sensitive information.
Technical or regulatory resource relevant to iTR Lumbar Passive Assistor evaluation.
Key questions for evaluating iTR Lumbar Passive Assistor before purchase.
Purpose: Supports hip and back strength for workers handling heavy construction and logistics materials Power: Passive drive, hybrid module replaceable/expandable Size: 480 mm W × 180 mm D × 720 mm H Weight: 2.7 kg Range of motion: Waist bending angle to +150° Operation modes: Walking mode, working mode Degrees of.
Exact robot model, revision and manufacturer part reference; Payload, reach, mobility, speed or working-envelope requirements relevant to the application; Battery, charging, runtime and power requirements where applicable.
No. Hardware revision, software, accessories, modules, handpieces, probes or other options can vary. The written quotation and exact-unit identification should define the supplied configuration.
Only items explicitly listed in the quotation and packing scope should be treated as included. Reference photographs can show accessories or system components that are not part of the final offer.
International B2B delivery can be arranged for approved destinations subject to product-specific transport requirements, customs rules and the agreed freight, insurance and delivery terms.
Manufacturer names and trademarks are used for product identification. Confirm model-specific instructions, compatibility and regional requirements before use.
Model, label/serial information, condition and supplied configuration can be confirmed before dispatch.
Quotation, packing scope, warranty terms and delivery responsibilities are documented before order approval.
Export packing, freight, insurance and shipment documentation can be coordinated for approved destinations.
Support is available for configuration questions, installation planning and procurement documentation.
Include delivery country, quantity, required configuration and target purchase date for a destination-specific offer.
Tell us what you need — we respond within one business day.
