Supermicro SYS-421GE-NBRT-LCC 4U GPU Server
$84,000.00
The Supermicro SYS-421GE-NBRT-LCC is a 4U HGX B200 system with eight SXM GPUs and dual 4th/5th Gen Intel Xeon Scalable sockets. Complete liquid-cooled rack integration and onsite service are manufacturer requirements. Confirm the installed components and integrated rack scope.
Explore Related
Related products, categories and research.
SYS-421GE-NBRT-LCC: eight B200 GPUs with Xeon Scalable hosts
The Supermicro SYS-421GE-NBRT-LCC pairs an HGX B200 accelerator assembly with two 4th/5th Gen Intel Xeon Scalable processor sockets. This liquid-cooled 4U model uses the X13DEG-D motherboard and LGA-4677 host platform. Its processor support differs from similarly named Xeon 6700 and AMD systems.

Rack integration comes before installation
Supermicro requires purchase with complete liquid-cooled rack integration and onsite service. Direct-to-chip cold plates form part of the cooling design. The listing name alone does not define the supplied cooling distribution, facility connections or commissioning scope.
Review the integrated rack design with the installation team. Identify the available electrical feeds, cooling interfaces and maintenance access before treating the enclosure as a replacement for another server. A matching rack-unit height does not establish matching power or cooling requirements.
Accelerators and workload planning
The platform supports eight NVIDIA B200 SXM GPUs, specified at 180GB per device, linked through NVLink and NVSwitch. Multiplying device memory gives 1.44TB in aggregate. That total spans eight accelerators; application partitioning still determines how the memory is used.
Training and inference deployments need a compatible software stack and an appropriate data path. A supported GPU topology describes platform capability rather than measured throughput. Confirm the actual accelerator assembly, drivers and application requirements when assessing the offered configuration.
Host and storage specifications
| Host sockets | Two LGA-4677 sockets for 4th/5th Gen Intel Xeon Scalable processors |
|---|---|
| CPU thermal support | Up to 350W TDP per supported liquid-cooled processor |
| DIMM positions | 32 ECC DDR5 RDIMM slots |
| One DIMM per channel | Up to 4TB and 5600MT/s |
| Two DIMMs per channel | Up to 8TB and 4400MT/s |
| Front storage | Eight hot-swap 2.5-inch U.2 NVMe bays |
| Internal storage | Two M-key M.2 NVMe positions |
Capacity ceilings do not identify supplied DIMMs or drives. Memory population affects supported speed, so compare the intended processor and DIMM arrangement with the qualification matrix. Host DDR5 and GPU memory serve different roles and should be budgeted separately.
The front drive positions provide serviceable NVMe storage. They do not establish installed SSD capacity, endurance or redundancy. Select the storage layout against dataset size and recovery needs, then verify the ordered drives and any software storage configuration.
Adapter expansion and management connections
The documented PCIe arrangement provides eight x16 low-profile slots and two x16 full-height, half-length slots, all PCIe 5.0. Card height and length remain physical compatibility constraints even when the electrical interface matches.
Two onboard RJ45 10GbE ports use the Intel X710-AT2 controller, with a separate BMC/IPMI management connection. A high-speed cluster fabric requires a specifically selected adapter configuration. The recommended SuperCluster networking shown in separate rack literature is not evidence that those adapters are included here.
Cabinet fit and redundant power
The enclosure is 449mm wide, 174mm high and 895.35mm deep. Leave space beyond that depth for cooling lines, cabling and servicing. The manufacturer gives a net system weight of 87kg; evaluate the actual configured assembly and handling arrangement before installation.
Four 6600W Titanium power supplies operate in a redundant 2+2 arrangement. Their rating is not measured application consumption, and available output depends on input voltage. The final rack power plan must account for the ordered hardware and facility supply.
Questions about configuration
Can this model take AMD EPYC processors?
No. Its host board uses Intel LGA-4677 sockets. EPYC support in a neighboring Supermicro platform does not apply to this model.
What should be verified in the offered package?
Confirm CPUs, DIMMs, drives, network cards and software together with rack cooling, rails, cables and service scope. Consult the manufacturer model datasheet and compare AI infrastructure equipment against the same installation requirements.
Recently viewed
Add AI Robot Supplier as a preferred source on Google.
