$25,050
Unitree G1 Edu Standard Humanoid Robot with Fake Hands (G1EDU-U1) is a humanoid robot from UNITREE ROBOTICS. Unitree G1 Edu Standard Humanoid Robot with Fake Hands (G1EDU-U1) It is typically positioned for teaching, lab demonstrations, and research prototyping where a full dexterous, sensor-rich end effector is not required, but where a humanoid body, bipedal.
Review the model information, technical details, compatibility, included configuration and documentation before requesting a destination-specific B2B quotation.
Related products, categories and research.
Unitree G1 Edu Standard Humanoid Robot with Fake Hands (G1EDU-U1) is a humanoid robot from UNITREE ROBOTICS. Unitree G1 Edu Standard Humanoid Robot with Fake Hands (G1EDU-U1) It is typically positioned for teaching, lab demonstrations, and research prototyping where a full dexterous, sensor-rich end effector is not required, but where a humanoid body, bipedal locomotion, and a modern robotics software stack are central to the curriculum or experiment.
Unitree G1 Edu Standard Humanoid Robot with Fake Hands (G1EDU-U1) is a humanoid robot from UNITREE ROBOTICS. Unitree G1 Edu Standard Humanoid Robot with Fake Hands (G1EDU-U1) It is typically positioned for teaching, lab demonstrations, and research prototyping where a full dexterous, sensor-rich end effector is not required, but where a humanoid body, bipedal locomotion, and a modern robotics software stack are central to the curriculum or experiment.
Sensing and perception stack Media coverage describes the G1 as using a 3D perception stack (including LiDAR and depth cameras in the reported configuration), supporting mapping, obstacle perception, and vision-based navigation research.
For procurement, match the exact model or part number, included accessories, configuration and condition to the written quotation before installation or deployment.
Match model, part number and serial or product-label details to the quotation.
Review system, accessory, software, power and facility requirements that apply to this product.
Confirm condition, included items, warranty, documentation and delivery terms before payment.
Use the product media and final exact-unit photographs to confirm configuration and condition before shipment.
The points below summarize model-specific information supported by manufacturer, regulatory or technical documentation.
Unitree G1 Edu Standard Humanoid Robot with Fake Hands (G1EDU-U1) It is typically positioned for teaching, lab demonstrations, and research prototyping where a full dexterous, sensor-rich end effector is not required, but where a humanoid body, bipedal locomotion, and a modern robotics software stack are central to the curriculum or experiment.
Sensing and perception stack Media coverage describes the G1 as using a 3D perception stack (including LiDAR and depth cameras in the reported configuration), supporting mapping, obstacle perception, and vision-based navigation research.
Design and Features Humanoid body and education-focused configuration The G1EDU-U1 is typically described as a standard education configuration that keeps the core humanoid body while using simplified (“fake”) hands—a common approach for reducing cost and maintenance complexity in classroom environments and early-stage research setups.
Unitree’s G1 drew broad attention as a comparatively low-cost humanoid platform in its category, and media coverage highlighted its role as a research and developer platform that requires user-side development and training rather than providing fully autonomous “household robot” behavior out of the box.
A reseller listing for the G1EDU-U1 and related G1 EDU variants highlights key platform-level parameters used in education and lab evaluation: Locomotion and degrees of freedom Degrees of freedom (DoF): The G1 platform is frequently cited at 23 DoF in public reporting.
Suitability depends on the exact configuration, compatible systems, intended professional use and manufacturer instructions.
Evaluate Unitree G1 Edu Standard Humanoid Robot with Fake Hands (G1EDU-U1) for embodied-AI, manipulation, locomotion or human-robot interaction workflows supported by the exact platform.
Confirm SDK/API, compute, simulation, teleoperation and supported AI frameworks before integration.
Match degrees of freedom, payload, reach, walking speed and end-effector capability to the intended tasks.
Confirm safety controls, charging, floor conditions, communications and commissioning requirements for the destination environment.
The table summarizes confirmed model and technical information confirmed from product specifications and technical documentation. Configuration-sensitive values should be checked against the exact supplied unit.
Use this checklist to reduce configuration, compatibility and acceptance problems.
Manufacturer and regulatory references are prioritized so buyers can verify identity, compatibility and configuration-sensitive information.
Technical or regulatory resource relevant to Unitree G1 Edu Standard Humanoid Robot with Fake Hands (G1EDU-U1) evaluation.
Technical or regulatory resource relevant to Unitree G1 Edu Standard Humanoid Robot with Fake Hands (G1EDU-U1) evaluation.
Key questions for evaluating Unitree G1 Edu Standard Humanoid Robot with Fake Hands (G1EDU-U1) before purchase.
Unitree G1 Edu Standard Humanoid Robot with Fake Hands (G1EDU-U1) It is typically positioned for teaching, lab demonstrations, and research prototyping where a full dexterous, sensor-rich end effector is not required, but where a humanoid body, bipedal locomotion, and a modern robotics software stack are central to.
Exact robot model, revision and manufacturer part reference; Payload, reach, mobility, speed or working-envelope requirements relevant to the application; Battery, charging, runtime and power requirements where applicable.
No. Hardware revision, software, accessories, modules, handpieces, probes or other options can vary. The written quotation and exact-unit identification should define the supplied configuration.
Only items explicitly listed in the quotation and packing scope should be treated as included. Reference photographs can show accessories or system components that are not part of the final offer.
International B2B delivery can be arranged for approved destinations subject to product-specific transport requirements, customs rules and the agreed freight, insurance and delivery terms.
Manufacturer names and trademarks are used for product identification. Confirm model-specific instructions, compatibility and regional requirements before use.
Model, label/serial information, condition and supplied configuration can be confirmed before dispatch.
Quotation, packing scope, warranty terms and delivery responsibilities are documented before order approval.
Export packing, freight, insurance and shipment documentation can be coordinated for approved destinations.
Support is available for configuration questions, installation planning and procurement documentation.
Include delivery country, quantity, required configuration and target purchase date for a destination-specific offer.
Tell us what you need — we respond within one business day.
