$59
Unitree Go2 Standard Battery Charger (GO2-CHARGER) is a Robot Accessory from UNITREE ROBOTICS. Summary The Unitree Go2 Standard Battery Charger (GO2-CHARGER) is the baseline official charging solution for Unitree Go2 batteries, defined by its 100–240V universal input, 34.0V / 3.5A / 119.0W output, and typical charge times of ~2 hours for the standard.
Review the model information, technical details, compatibility, included configuration and documentation before requesting a destination-specific B2B quotation.
Related products, categories and research.
Unitree Go2 Standard Battery Charger (GO2-CHARGER) is a Robot Accessory from UNITREE ROBOTICS. Summary The Unitree Go2 Standard Battery Charger (GO2-CHARGER) is the baseline official charging solution for Unitree Go2 batteries, defined by its 100–240V universal input, 34.0V / 3.5A / 119.0W output, and typical charge times of ~2 hours for the standard battery and ~4 hours for the long-endurance battery.
Unitree Go2 Standard Battery Charger (GO2-CHARGER) is a Robot Accessory from UNITREE ROBOTICS. Summary The Unitree Go2 Standard Battery Charger (GO2-CHARGER) is the baseline official charging solution for Unitree Go2 batteries, defined by its 100–240V universal input, 34.0V / 3.5A / 119.0W output, and typical charge times of ~2 hours for the standard battery and ~4 hours for the long-endurance battery.
Supported battery types and charging times Unitree’s documentation lists two official Go2 battery packs and their approximate charging times using the standard charger: BT2-05 (Standard battery) — ~2 hours BT2-06 (Long-endurance battery) — ~4 hours These times are frequently used as real-world planning metrics for Go2 deployments—especially for training days, research experiments, and repeated demo sessions.
For procurement, match the exact model or part number, included accessories, configuration and condition to the written quotation before installation or deployment.
Match model, part number and serial or product-label details to the quotation.
Review system, accessory, software, power and facility requirements that apply to this product.
Confirm condition, included items, warranty, documentation and delivery terms before payment.
Use the product media and final exact-unit photographs to confirm configuration and condition before shipment.
The points below summarize model-specific information supported by manufacturer, regulatory or technical documentation.
Summary The Unitree Go2 Standard Battery Charger (GO2-CHARGER) is the baseline official charging solution for Unitree Go2 batteries, defined by its 100–240V universal input, 34.0V / 3.5A / 119.0W output, and typical charge times of ~2 hours for the standard battery and ~4 hours for the long-endurance battery.
Supported battery types and charging times Unitree’s documentation lists two official Go2 battery packs and their approximate charging times using the standard charger: BT2-05 (Standard battery) — ~2 hours BT2-06 (Long-endurance battery) — ~4 hours These times are frequently used as real-world planning metrics for Go2 deployments—especially for training days, research experiments, and repeated demo sessions.
The standard charger provides steady charging at 119W with a simple workflow and predictable charge times (about 2 hours for the standard Go2 battery), making it ideal for routine operation and backup charging.
Compact tabletop format Unitree’s manual provides a physical size specification for the standard charger of: 210mm × 108mm × 48.2mm This form factor is typical for robotics battery chargers designed for desktop or bench use, balancing portability with adequate thermal headroom for steady charging.
In Unitree’s documentation, it is positioned as the default charging option for both common Go2 battery variants: BT2-05 (Standard battery) BT2-06 (Long-endurance battery) This compatibility is important for users who operate mixed battery sets, especially in labs and training programs.
Suitability depends on the exact configuration, compatible systems, intended professional use and manufacturer instructions.
Evaluate Unitree Go2 Standard Battery Charger (GO2-CHARGER) for the documented robotics workflow supported by its exact hardware, payload and software configuration.
Confirm controller, SDK/API, network interfaces, sensors and supported third-party integrations.
Match payload, mobility, reach, runtime, environment and safety requirements to the intended task.
Confirm charging/power, accessories, training, spare parts and acceptance testing before deployment.
The table summarizes confirmed model and technical information confirmed from product specifications and technical documentation. Configuration-sensitive values should be checked against the exact supplied unit.
Use this checklist to reduce configuration, compatibility and acceptance problems.
Manufacturer and regulatory references are prioritized so buyers can verify identity, compatibility and configuration-sensitive information.
Technical or regulatory resource relevant to Unitree Go2 Standard Battery Charger (GO2-CHARGER) evaluation.
Technical or regulatory resource relevant to Unitree Go2 Standard Battery Charger (GO2-CHARGER) evaluation.
Key questions for evaluating Unitree Go2 Standard Battery Charger (GO2-CHARGER) before purchase.
Summary The Unitree Go2 Standard Battery Charger (GO2-CHARGER) is the baseline official charging solution for Unitree Go2 batteries, defined by its 100–240V universal input, 34.0V / 3.5A / 119.0W output, and typical charge times of ~2 hours for the standard battery and ~4 hours for the long-endurance battery.
Exact robot model, revision and manufacturer part reference; Payload, reach, mobility, speed or working-envelope requirements relevant to the application; Battery, charging, runtime and power requirements where applicable.
No. Hardware revision, software, accessories, modules, handpieces, probes or other options can vary. The written quotation and exact-unit identification should define the supplied configuration.
Only items explicitly listed in the quotation and packing scope should be treated as included. Reference photographs can show accessories or system components that are not part of the final offer.
International B2B delivery can be arranged for approved destinations subject to product-specific transport requirements, customs rules and the agreed freight, insurance and delivery terms.
Manufacturer names and trademarks are used for product identification. Confirm model-specific instructions, compatibility and regional requirements before use.
Model, label/serial information, condition and supplied configuration can be confirmed before dispatch.
Quotation, packing scope, warranty terms and delivery responsibilities are documented before order approval.
Export packing, freight, insurance and shipment documentation can be coordinated for approved destinations.
Support is available for configuration questions, installation planning and procurement documentation.
Include delivery country, quantity, required configuration and target purchase date for a destination-specific offer.
Tell us what you need — we respond within one business day.
