DSLRPros Air Drop System for DJI Matrice 4T / Matrice 4E
DSLRPros Air Drop System for DJI Matrice 4T / Matrice 4E is a Drone Camera / Payload from DSLRPros. Package weight: 0.2kg • Package volume: 14x7x5cm • Dimension: 85×75×35 mm • Weight: 75g • Water-proof: IP55 • Payload: 1.5KG Max.
DSLRPros Air Drop System for DJI Matrice 4T / Matrice 4E technical overview
DSLRPros Air Drop System for DJI Matrice 4T / Matrice 4E is a Drone Camera / Payload from DSLRPros. Package weight: 0.2kg • Package volume: 14x7x5cm • Dimension: 85×75×35 mm • Weight: 75g • Water-proof: IP55 • Payload: 1.5KG Max.
The hardware features a dual-hook configuration, enabling the simultaneous or independent delivery of two separate payloads with a combined capacity of up to 3 kg (6.6 lbs).
Before purchase, confirm the exact model or part number, configuration, compatible accessories and included scope against the written quotation and manufacturer documentation.
Three checks before purchase
Match the manufacturer model, part number and product-label details to the quotation.
Review system, accessory, software, power and installation requirements that apply to this product.
Confirm included items, condition, warranty, documentation and delivery terms before payment.
DSLRPros Air Drop System for DJI Matrice 4T / Matrice 4E images
Use the product media and exact-unit photographs supplied with the quotation to confirm model, configuration and condition.
Important DSLRPros Air Drop System for DJI Matrice 4T / Matrice 4E details
These points summarize model-specific technical information available for product evaluation.
Package weight: 0.2kg • Package volume: 14x7x5cm • Dimension: 85×75×35 mm • Weight
Package weight: 0.2kg • Package volume: 14x7x5cm • Dimension: 85×75×35 mm • Weight: 75g • Water-proof: IP55 • Payload: 1.5KG Max.
The hardware features a dual-hook configuration, enabling the simultaneous or
The hardware features a dual-hook configuration, enabling the simultaneous or independent delivery of two separate payloads with a combined capacity of up to 3 kg (6.6 lbs).
Dimension: 85×75×35 mm
Dimension: 85×75×35 mm
Dual independent hooks: Facilitates the delivery of two payloads up to 1.5 kg (3.3
Dual independent hooks: Facilitates the delivery of two payloads up to 1.5 kg (3.3 lbs) each.
Built on DJI’s Payload SDK (PSDK), this system integrates seamlessly with the DJI
Built on DJI’s Payload SDK (PSDK), this system integrates seamlessly with the DJI Pilot 2 interface, allowing operators to trigger precise releases directly from the remote controller.
Where DSLRPros Air Drop System for DJI Matrice 4T / Matrice 4E can fit
Suitability depends on the exact configuration, compatible systems, intended professional use and manufacturer instructions.
UAS payload integration
Evaluate DSLRPros Air Drop System for DJI Matrice 4T / Matrice 4E for compatible aircraft and mission workflows supported by its exact interface, power and payload requirements.
Inspection and data capture
Match camera, thermal, LiDAR, spotlight, speaker or sensor capability to the intended workflow.
Platform compatibility
Confirm supported aircraft, gimbal/port interface, firmware, controller and application requirements.
Mission readiness
Verify mounting hardware, cables, storage media, environmental rating and included accessories.
DSLRPros Air Drop System for DJI Matrice 4T / Matrice 4E specifications and identification
The table summarizes confirmed model and technical information from product specifications and available technical documentation. Configuration-sensitive values should be checked against the exact supplied unit.
- Product
- DSLRPros Air Drop System for DJI Matrice 4T / Matrice 4E
- Manufacturer / brand
- DSLRPros
- Model / part reference
- DSLRPros Air Drop System for DJI Matrice 4T / Matrice 4E
- Equipment type
- Drone Camera / Payload
- DSLRPros Air Drop System for DJI Matrice 4T / 4E
- Precision dual-payload delivery
- PSDK 3.0 integration
- Enables native control and real-time status feedback within the DJI Pilot 2 app.
- Power-free mounting
- Mechanical design allows for payload loading and manual release without requiring aircraft power.
- Ultra-lightweight chassis
- Weighs only 75 grams to minimize impact on total flight endurance and agility.
- Package weight
- 0.2kg
- Dimension
- 85×75×35 mm
- Payload
- 1.5KG Max. for each hook; 3KG in total
- Payload
- 1.5KG
- Weight
- 0.2kg
What to verify before ordering DSLRPros Air Drop System for DJI Matrice 4T / Matrice 4E
Use this checklist to reduce model, configuration and integration mismatches.
- Exact payload/accessory model and manufacturer part number
- Supported aircraft and gimbal/port or electrical interface
- Firmware, controller and application compatibility
- Power, weight, mounting and payload-capacity limits
- Environmental rating and mission-specific operating limits
- Included cables, brackets, storage media and other accessories
DSLRPros Air Drop System for DJI Matrice 4T / Matrice 4E manufacturer and technical resources
Manufacturer, regulator and other authoritative references are prioritized for product verification.
Technical documentation
Request model documentation and exact configuration information for the supplied unit.
Frequently asked questions
Key questions for evaluating DSLRPros Air Drop System for DJI Matrice 4T / Matrice 4E before purchase.
What is DSLRPros Air Drop System for DJI Matrice 4T / Matrice 4E?
Package weight: 0.2kg • Package volume: 14x7x5cm • Dimension: 85×75×35 mm • Weight: 75g • Water-proof: IP55 • Payload: 1.5KG Max.
What should be checked before ordering DSLRPros Air Drop System for DJI Matrice 4T / Matrice 4E?
Exact payload/accessory model and manufacturer part number; Supported aircraft and gimbal/port or electrical interface; Firmware, controller and application compatibility.
Are all DSLRPros Air Drop System for DJI Matrice 4T / Matrice 4E configurations identical?
No. Hardware revision, software, accessories, modules, handpieces, probes or other options can vary. The written quotation and exact-unit identification should define the supplied configuration.
What is included with DSLRPros Air Drop System for DJI Matrice 4T / Matrice 4E?
Only items explicitly listed in the quotation and packing scope should be treated as included. Reference photographs can show accessories or system components that are not part of the final offer.
Can DSLRPros Air Drop System for DJI Matrice 4T / Matrice 4E be shipped internationally?
International B2B delivery can be arranged for approved destinations subject to product-specific transport requirements, customs rules and the agreed freight, insurance and delivery terms.
DSLRPros documentation for DSLRPros Air Drop System for DJI Matrice 4T / Matrice 4E
Manufacturer names and trademarks are used for product identification. Confirm model-specific instructions, compatibility and regional requirements before deployment.
Procurement support for DSLRPros Air Drop System for DJI Matrice 4T / Matrice 4E
Model, part number, condition and supplied configuration can be confirmed before dispatch.
Quotation, packing scope, warranty terms and delivery responsibilities are documented before order approval.
Export packing, freight, insurance and shipment documentation can be coordinated for approved destinations.
Support is available for compatibility questions, installation planning and procurement documentation.
Request a quote for DSLRPros Air Drop System for DJI Matrice 4T / Matrice 4E
Include delivery country, quantity, required configuration and target purchase date for a destination-specific offer.
