Unitree G1 Mid360 Lidar (G1-MID360L)
Unitree G1 Mid360 Lidar (G1-MID360L) is a humanoid robot from UNITREE ROBOTICS. On humanoid robots such as the Unitree G1, a 3D LiDAR is typically used for SLAM (Simultaneous Localization and Mapping), autonomous navigation, collision avoidance, and stable movement in complex indoor and outdoor environments.
Unitree G1 Mid360 Lidar (G1-MID360L) technical overview
Unitree G1 Mid360 Lidar (G1-MID360L) is a humanoid robot from UNITREE ROBOTICS. On humanoid robots such as the Unitree G1, a 3D LiDAR is typically used for SLAM (Simultaneous Localization and Mapping), autonomous navigation, collision avoidance, and stable movement in complex indoor and outdoor environments.
Summary The Unitree G1 Mid360 LiDAR (G1-MID360L) is a 3D sensing accessory aligned with the Livox MID-360 LiDAR family, enabling 360° perception, SLAM mapping, and obstacle-aware navigation for the Unitree G1 humanoid robot.
For procurement, match the exact model or part number, included accessories, configuration and condition to the written quotation before installation or deployment.
Three checks before purchase
Match model, part number and serial or product-label details to the quotation.
Review system, accessory, software, power and facility requirements that apply to this product.
Confirm condition, included items, warranty, documentation and delivery terms before payment.
Unitree G1 Mid360 Lidar (G1-MID360L) images
Use the product media and final exact-unit photographs to confirm configuration and condition before shipment.
Important Unitree G1 Mid360 Lidar (G1-MID360L) details
The points below summarize model-specific information supported by manufacturer, regulatory or technical documentation.
On humanoid robots such as the Unitree G1, a 3D LiDAR is typically used for SLAM
On humanoid robots such as the Unitree G1, a 3D LiDAR is typically used for SLAM (Simultaneous Localization and Mapping), autonomous navigation, collision avoidance, and stable movement in complex indoor and outdoor environments.
Summary The Unitree G1 Mid360 LiDAR (G1-MID360L) is a 3D sensing accessory aligned with
Summary The Unitree G1 Mid360 LiDAR (G1-MID360L) is a 3D sensing accessory aligned with the Livox MID-360 LiDAR family, enabling 360° perception, SLAM mapping, and obstacle-aware navigation for the Unitree G1 humanoid robot.
The Unitree G1 Mid360 LiDAR (G1-MID360L) is a 3D LiDAR module associated with the Livox
The Unitree G1 Mid360 LiDAR (G1-MID360L) is a 3D LiDAR module associated with the Livox MID-360, used to provide 360° environmental perception for navigation, mapping, and obstacle detection on the Unitree G1 humanoid robot.
2) SLAM mapping for indoor environments A major reason to choose LiDAR on a mobile
2) SLAM mapping for indoor environments A major reason to choose LiDAR on a mobile robot is stable 3D mapping in environments where lighting changes or reflective surfaces challenge cameras.
Applications and Use Cases 1) Autonomous navigation and humanoid mobility A humanoid
Applications and Use Cases 1) Autonomous navigation and humanoid mobility A humanoid robot’s greatest operational risk is collisions and unstable steps caused by incomplete perception.
Where Unitree G1 Mid360 Lidar (G1-MID360L) can fit
Suitability depends on the exact configuration, compatible systems, intended professional use and manufacturer instructions.
Embodied AI and robotics research
Evaluate Unitree G1 Mid360 Lidar (G1-MID360L) for embodied-AI, manipulation, locomotion or human-robot interaction workflows supported by the exact platform.
Software and model development
Confirm SDK/API, compute, simulation, teleoperation and supported AI frameworks before integration.
Manipulation and mobility
Match degrees of freedom, payload, reach, walking speed and end-effector capability to the intended tasks.
Lab or enterprise deployment
Confirm safety controls, charging, floor conditions, communications and commissioning requirements for the destination environment.
Unitree G1 Mid360 Lidar (G1-MID360L) specifications and identification
The table summarizes confirmed model and technical information confirmed from product specifications and technical documentation. Configuration-sensitive values should be checked against the exact supplied unit.
- Product
- Unitree G1 Mid360 Lidar (G1-MID360L)
- Manufacturer / brand
- UNITREE ROBOTICS
- Model / part reference
- Unitree G1 Mid360 Lidar (G1-MID360L)
- Equipment type
- Humanoid Robot
- Origin
- China
What to verify before ordering Unitree G1 Mid360 Lidar (G1-MID360L)
Use this checklist to reduce configuration, compatibility and acceptance problems.
- Exact robot model, revision and manufacturer part reference
- Payload, reach, mobility, speed or working-envelope requirements relevant to the application
- Battery, charging, runtime and power requirements where applicable
- Controller, SDK/API, network interfaces and software compatibility
- Sensors, end effectors, safety systems and included accessories
- Operating environment, floor/terrain, IP rating and commissioning requirements
Unitree G1 Mid360 Lidar (G1-MID360L) manufacturer and technical resources
Manufacturer and regulatory references are prioritized so buyers can verify identity, compatibility and configuration-sensitive information.
UNITREE ROBOTICS official technical resource
Technical or regulatory resource relevant to Unitree G1 Mid360 Lidar (G1-MID360L) evaluation.
UNITREE ROBOTICS official technical resource
Technical or regulatory resource relevant to Unitree G1 Mid360 Lidar (G1-MID360L) evaluation.
Frequently asked questions
Key questions for evaluating Unitree G1 Mid360 Lidar (G1-MID360L) before purchase.
What is Unitree G1 Mid360 Lidar (G1-MID360L)?
On humanoid robots such as the Unitree G1, a 3D LiDAR is typically used for SLAM (Simultaneous Localization and Mapping), autonomous navigation, collision avoidance, and stable movement in complex indoor and outdoor environments.
What should be checked before ordering Unitree G1 Mid360 Lidar (G1-MID360L)?
Exact robot model, revision and manufacturer part reference; Payload, reach, mobility, speed or working-envelope requirements relevant to the application; Battery, charging, runtime and power requirements where applicable.
Are all Unitree G1 Mid360 Lidar (G1-MID360L) configurations identical?
No. Hardware revision, software, accessories, modules, handpieces, probes or other options can vary. The written quotation and exact-unit identification should define the supplied configuration.
What is included with Unitree G1 Mid360 Lidar (G1-MID360L)?
Only items explicitly listed in the quotation and packing scope should be treated as included. Reference photographs can show accessories or system components that are not part of the final offer.
Can Unitree G1 Mid360 Lidar (G1-MID360L) be shipped internationally?
International B2B delivery can be arranged for approved destinations subject to product-specific transport requirements, customs rules and the agreed freight, insurance and delivery terms.
UNITREE ROBOTICS documentation for Unitree G1 Mid360 Lidar (G1-MID360L)
Manufacturer names and trademarks are used for product identification. Confirm model-specific instructions, compatibility and regional requirements before use.
Procurement support for Unitree G1 Mid360 Lidar (G1-MID360L)
Model, label/serial information, condition and supplied configuration can be confirmed before dispatch.
Quotation, packing scope, warranty terms and delivery responsibilities are documented before order approval.
Export packing, freight, insurance and shipment documentation can be coordinated for approved destinations.
Support is available for configuration questions, installation planning and procurement documentation.
Request a quote for Unitree G1 Mid360 Lidar (G1-MID360L)
Include delivery country, quantity, required configuration and target purchase date for a destination-specific offer.
