Unitree AS2 Price 2026: Air vs Pro vs X vs EDU, Specs & Buyer’s Guide

Unitree AS2 Price 2026: What Does the AS2 Cost?

The Unitree AS2 price also changes according to battery capacity, controller inclusion, LiDAR configuration, warranty and whether development access is required.

The current Unitree AS2 price depends on the exact model. Unitree’s official online store displays the AS2 range from $3,100, but the company’s full technical page lists all four versions as contact-sales products. The store also states that customs duties are not included.

On AI Robot Supplier, the current commercial structure is different by model. The Unitree AS2 Air and Unitree AS2 Pro are quotation products, while the Unitree AS2 EDU Standard is currently listed at $7,140.

A low headline Unitree AS2 price should therefore not be compared with a higher EDU quotation without checking what is actually included. Battery capacity, LiDAR class, controller, development rights, charging hardware, warranty and compute expansion can all change the value of the package.

Unitree AS2 Air vs Pro vs X vs EDU: The Important Differences

The strongest reason to use Unitree’s official matrix is that the four AS2 versions are not merely different software licenses on identical hardware. They share the same basic 12-DOF chassis dimensions and approximately 20 kg weight, but their motors, batteries, LiDAR, payload, runtime, speed, environmental rating, warranty and development access differ materially.

This comparison is the most important part of the Unitree AS2 price decision. A buyer who only needs lower-cost mobility may have no reason to pay for EDU, while a research laboratory that needs secondary development should avoid Air and Pro even if their hardware appears attractive.

Unitree AS2 Specs: Size, Weight, Motors and Core Hardware

Across all four versions, Unitree specifies the AS2 at 720 × 378 × 457 mm while standing and 776 × 378 × 233 mm lying prone. Weight is approximately 20 kg including battery, and each version uses 12 joint motors.

The chassis uses aluminum alloy and high-strength engineering plastic, while Unitree lists industrial-grade crossed-roller bearings and low-inertia, high-speed inner-rotor permanent-magnet synchronous motors. The important difference is torque: approximately 65 N·m for Air, 75 N·m for Pro and 95 N·m for X and EDU.

Unitree markets the top AS2 configurations as delivering roughly twice the dynamic performance of Go2. That family-level statement should not be applied blindly to AS2 Air because Air has lower torque, lower speed, lower payload and a smaller battery than X or EDU.

Unitree AS2 Air Price and Specs: Best Entry-Level AS2?

AS2 Air is the lightest-duty configuration in the family. It retains the approximately 20 kg chassis and 12-DOF architecture but uses 65 N·m maximum joint torque, an 8,000 mAh battery, Unitree L2 LiDAR and a lower performance envelope.

Air is rated for approximately 10 kg continuous walking load, around 45 kg standing load, roughly two hours / 10 km unloaded endurance, and more than 1.5 hours / 7 km with a 10 kg payload. Maximum listed operating speed is 3.0 m/s.

Unitree does not list an IP protection rating for Air in the current comparison matrix, while Pro, X and EDU are rated IP54. The remote controller is optional, and Unitree gives Air a six-month warranty rather than the 12 months specified for the other three variants.

AS2 Air therefore makes the most sense when the goal is lower acquisition cost, general mobility, demonstrations, intelligent platform use or lighter payload transport. It is not the correct AS2 for teams requiring official secondary development.

For buyers prioritizing acquisition cost, the Unitree AS2 price advantage of Air should be weighed against its smaller battery, lower payload and shorter warranty.

Check Unitree AS2 Air availability →

Unitree AS2 Pro Price and Specs: The Commercial Sweet Spot

AS2 Pro represents a major step up from Air without moving into the official secondary-development versions. It uses approximately 75 N·m maximum joint torque, a 15,000 mAh long-range battery, industrial-grade 64–128-line LiDAR, GPS/4G hardware, ISS 3.0 side-follow capability and IP54 protection.

Unitree rates Pro for around 13 kg continuous walking payload, approximately 55 kg standing load, about four hours / 20 km unloaded operation, and more than 2.5 hours / 13 km while carrying 13 kg.

Its speed range increases to 0–3.7 m/s, slope capability to about 40°, and stair height to 25 cm. The controller is included, the charger is upgraded to a 50.4V 7.4A fast charger, and the warranty is 12 months.

For many professional buyers, this may be the strongest value point in the family. It provides significantly better endurance, environmental readiness and sensing than Air without requiring a research/development purchase. The limitation is important: Unitree officially marks secondary development as unsupported on AS2 Pro.

For many commercial buyers, the Unitree AS2 price of Pro can offer a better balance between professional sensing, endurance and payload than either the entry Air or development-focused EDU.

Request a Unitree AS2 Pro quote →

Unitree AS2 X: Maximum Dynamic Performance With Development Access

AS2 X is the performance-focused development version. It increases maximum joint torque to approximately 95 N·m, supports up to around 15 kg continuous walking payload, approximately 65 kg standing load and speeds up to roughly 5 m/s under the manufacturer’s stated conditions.

X uses the 15,000 mAh long-range battery, industrial-grade 64–128-line LiDAR, IP54 protection, GPS/4G hardware, ISS 3.0 and a 12-month warranty. Crucially, Unitree marks secondary development as supported.

That makes X more relevant to engineering teams that want the strongest dynamic AS2 hardware but do not necessarily need the EDU package’s charging dock and high-compute expansion options.

AI Robot Supplier did not surface a dedicated AS2 X product listing during this audit, so buyers requiring X should request the exact model rather than substitute Pro or EDU by assumption.

Request an AS2 X configuration →

Unitree AS2 EDU Price: Best AS2 for Research and Robotics Development

AS2 EDU shares the highest AS2 torque and payload class with X but adds the strongest development-oriented package. Unitree specifies 95 N·m maximum joint torque, approximately 15 kg continuous walking load, around 65 kg standing load, industrial-grade LiDAR and official secondary-development support.

EDU also adds a charging dock and support for high-computing-power expansion docks using multiple compute brands and models, including options such as NVIDIA Jetson Orin NX. That is important for teams building custom perception, autonomy, embodied-AI or navigation workloads.

The current AI Robot Supplier Unitree AS2 EDU price is $7,140 for the EDU Standard listing. Exact compute modules, sensors, charging hardware and other accessories should still be confirmed in the written quotation before purchasing.

Universities and robotics developers should choose EDU because of its software and expansion capability, not simply because it has the highest hardware specification. If your project does not require custom development, Pro can be commercially more efficient.

Universities comparing the Unitree AS2 price should therefore evaluate EDU based on development capability and compute expansion rather than comparing its cost directly with Air.

View Unitree AS2 EDU Standard →

Unitree AS2 Payload, Speed and Battery Life Explained

Payload is one of the areas most likely to confuse buyers. Online discussions sometimes describe the AS2 as able to “carry a person” because Unitree advertises a standing load as high as 65 kg. That is not the same as continuous walking payload.

According to the official specification matrix, continuous walking payload ranges from approximately 10 kg on Air to 13 kg on Pro and 15 kg on X/EDU. Standing-load figures are much higher because the robot is not being asked to transport that load continuously over terrain.

The same distinction applies to speed and runtime. Unitree’s headline “greater than 5 m/s” performance applies to the higher-performance AS2 configurations, while Air is listed at 0–3.0 m/s and Pro at 0–3.7 m/s.

Battery life also varies sharply. Air uses an 8,000 mAh battery and is rated around two hours unloaded. Pro, X and EDU use 15,000 mAh long-range batteries, with about four hours / 20 km unloaded and more than 2.5 hours under their rated loaded endurance conditions.

For real procurement, these figures should be treated as manufacturer laboratory baselines. Terrain, payload, temperature, movement speed, AI compute load, wireless radios and mission behavior can reduce actual runtime.

AS2 LiDAR, ISS 3.0, GPS, 4G and Intelligent Following

All AS2 versions use an eight-core high-performance CPU, Wi-Fi 6, Bluetooth 5.2, an HD camera, speaker and microphone. The sensing and communications packages then separate the models.

Air uses Unitree’s L2 ultra-wide-angle LiDAR. Pro, X and EDU move to industrial-grade 64–128-line LiDAR. Pro, X and EDU also list GPS and 4G hardware, disabled by default and enabled with user authorization, while those features are absent from Air.

Unitree’s ISS 3.0 Intelligent Side-follow System is included on Pro, X and EDU. Unitree describes the system as supporting centimeter-level positioning for stable following behavior.

Buyers considering AS2 for inspection or autonomous workflows should separate “intelligent following” from full autonomous mission execution. The robot’s exact navigation, mapping, autonomy and development functions depend on the configuration and software package.

Can You Program the Unitree AS2? Air/Pro vs X/EDU

This is one of the most important purchasing distinctions in the entire AS2 family.

Unitree’s current comparison table marks secondary development as not supported on AS2 Air and AS2 Pro. It marks secondary development as supported on AS2 X and AS2 EDU.

Therefore, a developer should not buy Pro solely because it has industrial LiDAR, better endurance and a strong hardware package. If the objective is custom robotics software, ROS integration, custom autonomy, AI-model deployment or deep platform access, X or EDU is the safer purchasing direction.

EDU is particularly attractive when onboard AI compute expansion matters because Unitree explicitly lists high-compute expansion-dock support, including options such as Orin NX.

Official Unitree AS2 Video

Official Unitree Robotics AS2 video. Unitree’s published specifications can change by version, firmware and market; confirm the exact configuration being ordered.

Unitree AS2 vs Go2 Pro vs A2: Which Robot Dog Should You Buy?

The Unitree AS2 price makes more sense when compared with the job each platform is designed to perform.

Buyers whose main requirement is an affordable robot dog should first compare the Unitree Go2 Pro price and buyer’s guide. Buyers requiring a larger professional platform should compare the Unitree A2 Pro.

AS2 occupies the middle: more payload, endurance and industrial sensing than entry Go2-class robots, but substantially more compact than Unitree’s larger A2 platform.

Who Should Buy Each AS2 Version?

Unitree AS2 Shipping, Import Costs and Buying Checklist

The advertised Unitree AS2 price is not always the final delivered cost. Unitree’s store explicitly states that customs duties are not included. International buyers should budget for the complete procurement rather than comparing chassis prices alone.

Before ordering, confirm:

• Exact version: Air, Pro, X or EDU.
• Battery: 8,000 mAh Air or 15,000 mAh long-range battery.
• Controller: optional on Air; included on Pro/X/EDU according to Unitree’s matrix.
• Charger: standard charger on Air versus fast charger on the higher variants.
• LiDAR: Unitree L2 versus industrial 64–128-line LiDAR.
• Development: unsupported on Air/Pro; supported on X/EDU.
• Payload requirement: distinguish continuous walking payload from static standing load.
• IP rating: Unitree lists IP54 for Pro/X/EDU but not Air in the current matrix.
• Warranty: six months for Air versus 12 months for Pro/X/EDU.
• Destination costs: freight, insurance, customs duties, taxes and clearance.
• Accessories: confirm mounts, spare batteries, compute modules and docking equipment.

For business, university or integrator purchases, provide the delivery country, required AS2 version, quantity, payload requirement and development needs before requesting the final quotation.

The final Unitree AS2 price should always be calculated as delivered cost, including the robot configuration, accessories, freight, insurance, customs duties and applicable taxes.

Frequently Asked Questions About Unitree AS2 Price and Specs

Related Unitree Robot Buying Guides

• Unitree Go2 Pro Price & Buyer’s Guide
• Unitree Robot Prices & Models 2026
• Unitree A2 Pro Quadruped Robot
• Robot Dogs & Quadrupeds for Sale
• Unitree Robots for Sale

Final Verdict: Which AS2 Should You Buy?

The Unitree AS2 price should be evaluated against the capability you actually need. Air is the value entry point. Pro is the strongest general commercial configuration for buyers who want better sensing, endurance, payload and IP54 protection without development access. X adds top-tier AS2 dynamics and official secondary development. EDU is the most complete research and integration platform.

For most professional buyers, the decision is therefore not “Is AS2 good?” but which AS2 version matches the mission? Choosing the correct variant before ordering is more important than chasing the lowest headline price.

Sources and Further Reading

• Unitree Robotics — AS2 official specifications and variant comparison
• Unitree Official Store — AS2 current store listing and starting price
• Unitree — AS2 app resources

This article is a source-based buyer guide, not a hands-on laboratory review. Manufacturer performance figures are laboratory or stated reference values and can vary by payload, terrain, temperature, software, battery condition and exact configuration. Confirm current pricing and the written supplied scope before ordering.