Industrial Wheeled-Legged Quadruped Robot
DEEP Robotics LYNX M20 Pro
The LYNX M20 Pro is a professional wheeled-legged quadruped robot developed by DEEP Robotics for industrial inspection, autonomous navigation, field robotics, logistics, emergency response and advanced robotics research.
For buyers searching for a LYNX M20 Pro for sale, its main advantage is the hybrid mobility architecture: powered wheels provide efficient travel over flat ground while articulated legs allow the platform to negotiate stairs, slopes, rubble, curbs and irregular terrain that conventional wheeled AMRs may not handle.
The current manufacturer specification gives the M20 Pro a 15 kg effective payload, approximately 3 hours / 15 km unloaded endurance, approximately 2.5 hours / 12 km at 15 kg load, dual 96-line LiDAR, dual wide-angle cameras, SLAM mapping, autonomous navigation, IP66 protection and an operating-temperature range from approximately −20°C to 55°C.
AI Robot Supplier currently lists the M20 Pro at $29,997. Current dealer and manufacturer-store prices are often substantially higher, so buyers should confirm the exact hardware revision, batteries, controller, charging hardware, autonomy software and warranty scope before comparing offers.
Effective payload
Unloaded endurance
LiDAR
Protection rating
Product overview
What Is the LYNX M20 Pro?
The LYNX M20 Pro is a mid-size hybrid wheel-leg robot designed to combine the rolling efficiency of an autonomous mobile robot with the terrain adaptability of a quadruped.
Its current manufacturer dimensions are approximately 820 × 430 × 570 mm. DEEP Robotics’ newest global product specification lists approximately 35 kg with battery.
The platform provides a 15 kg effective working payload and a 50 kg maximum-load reference. The 50 kg figure should not be treated as the normal continuous field payload; mission design should use the 15 kg effective-payload specification unless DEEP Robotics confirms otherwise.
M20 Pro is particularly useful when a project requires fast travel between inspection points but also needs the robot to cross stairs, curbs, steep grades or debris where ordinary wheeled platforms stop.
Three Checks Before Buying
Make sure the quotation identifies LYNX M20 Pro rather than M20 Standard, older LYNX or the newer M20S.
Verify SLAM, autonomous navigation, obstacle avoidance, point-cloud viewing and the installed firmware version.
Controller, batteries, charging hub, transport case, documentation and optional autonomous charging should be listed in writing.
Product media
LYNX M20 Pro Images
Use real M20 Pro or official LYNX M20-series manufacturer images only. Do not use AI-generated quadruped imagery for this product page.
Wheel-legged industrial mobility platform.
Official DEEP Robotics LYNX series imagery.
Manufacturer media illustrating the LYNX wheel-leg architecture.
Industrial capabilities
LYNX M20 Pro Features
Wheel-Leg Hybrid Mobility
Powered wheels support efficient rolling while articulated legs provide posture control, stair climbing and obstacle traversal.
15 kg Effective Payload
The current manufacturer working-payload reference is approximately 15 kg.
Dual 96-Line LiDAR
Two 96-line LiDAR units provide approximately 360° × 90° sensing coverage at roughly 860,000 points per second.
Dual Wide-Angle Cameras
Two wide-angle cameras complement the LiDAR system for visual perception and remote operation.
SLAM & Autonomous Navigation
The Pro configuration adds SLAM mapping and autonomous navigation compared with the simpler base M20 configuration.
Triple Industrial Compute
M20 Pro uses three octa-core 64-bit industrial processing units in the current manufacturer configuration.
IP66 Protection
The platform is designed for dust, rain and demanding industrial environments with IP66 protection.
−20°C to 55°C Operation
The published operating-temperature range supports outdoor and industrial deployment across a broad climate range.
Front / Rear Lighting
Bidirectional lighting assists inspection and remote operation in darker environments.
Verified specifications
LYNX M20 Pro Specs
Specification conflict
Why Do Some LYNX M20 Pro Pages Say 33 kg?
Older DEEP Robotics brochures and the current US online-shop listing show approximately 33 kg.
The newer global DEEP Robotics page lists approximately 35 kg with battery.
Because your SEO policy prioritises the newest official manufacturer specification, this page uses approximately 35 kg. Buyers should still confirm the actual delivered hardware revision on the quotation and packing list.
Real-world performance
LYNX M20 Pro Speed, Stairs and Terrain Capability
5 m/s Lab Maximum
DEEP Robotics publishes 5 m/s as an extreme lab-tested figure. It should not be treated as the normal inspection or delivery speed.
2 m/s Field Operating Speed
The manufacturer lists approximately 2 m/s as the normal field operating speed.
25 cm Continuous Stairs
The wheel-leg architecture can repeatedly negotiate stair heights of approximately 25 cm under reference conditions.
80 cm Single-Step Reference
The platform is rated for a maximum single-step obstacle reference of approximately 80 cm.
45° Slope
The published maximum slope is approximately 45°, subject to surface material, traction and payload.
Zero-Radius Direction Reversal
The symmetrical wheel-leg platform can reverse direction and perform manoeuvres in confined spaces without requiring a conventional wheeled turning circle.
Battery & endurance
LYNX M20 Pro Battery Life and Charging
3 Hours Unloaded
Manufacturer reference endurance is approximately three hours with no external payload.
2.5 Hours at 15 kg
With the effective 15 kg payload, the published endurance is approximately 2.5 hours.
15 km / 12 km Range
Published travel range is approximately 15 km unloaded and approximately 12 km at the 15 kg effective payload.
Battery and Charging Details
The current user manual describes a dual replaceable-battery system. Each battery is listed at approximately 4.5 Ah with nominal 72 V operation.
DEEP Robotics’ web specification lists approximately 1.5 hours charging time for a single battery, while the user manual gives a wider 1.5–2 hour reference and supports simultaneous charging through the supplied charging hub.
Optional autonomous charging is also available for suitable deployment configurations.
Perception & autonomy
Dual LiDAR, Cameras and Autonomous Navigation
Dual 96-Line LiDAR
Two 96-line LiDAR sensors provide high-density point-cloud input for mapping, localisation and obstacle detection.
Dual Wide-Angle Cameras
The camera system provides visual context for inspection and remote operation.
SLAM Mapping
M20 Pro includes SLAM mapping and localisation functions for autonomous-navigation workflows.
Autonomous Navigation
The Pro configuration is designed to execute navigation tasks after mapping and commissioning.
Point-Cloud Surround View
Manufacturer materials list point-cloud surround viewing, though older documentation notes firmware/OTA dependency for some perception functions.
RF Image Transmission
RF video transmission supports supervised field operation and remote visual awareness.
SDK & robotics development
LYNX M20 Pro ROS 2 and Secondary Development
ROS 2 Sim-to-Real
DEEP Robotics now publishes an official M20/M20 Pro ROS 2 deployment repository covering simulation-to-simulation and simulation-to-real workflows.
MuJoCo Simulation
The official M20 deployment workflow includes MuJoCo-based simulation examples for reinforcement-learning and locomotion development.
Real-Robot SDK Mode
The ROS 2 deployment flow includes real-robot control, keyboard and gamepad modes and SDK-mode enablement.
Android SDK
DEEP Robotics publishes an M20 Android SDK for robot connection, state management, remote control and custom operator-app development.
Hardware Development Manual
Official hardware-development documentation covers external payload integration and interface planning.
Warranty Caveat
DEEP Robotics’ public SDK repository warns that damage caused through SDK use may not be covered by warranty, so low-level control should be validated carefully.
Model comparison
LYNX M20 vs M20 Pro vs M20S
The newer M20S is now the higher-performance industrial upgrade to the M20 Pro, so buyers should understand where the Pro still fits.
| Feature | LYNX M20 | LYNX M20 Pro | LYNX M20S |
|---|---|---|---|
| Dimensions | 820 × 430 × 570 mm | 820 × 430 × 570 mm | 820 × 430 × 570 mm |
| Current weight reference | ~35 kg | ~35 kg | ~35–36 kg |
| Effective payload | 15 kg | 15 kg | ~35 kg |
| Maximum load | 50 kg | 50 kg | 100 kg |
| Unloaded endurance | 3 h / 15 km | 3 h / 15 km | 3.5–5 h / 16–20 km |
| Loaded endurance | 2.5 h / 12 km | 2.5 h / 12 km | 2.5–3.5 h / 12–15 km |
| Lab-tested speed | 5 m/s | 5 m/s | 9 m/s |
| Field operating speed | 2 m/s | 2 m/s | 2 m/s |
| Continuous stair height | 25 cm | 25 cm | 30 cm |
| Single-step height | 80 cm | 80 cm | 100 cm |
| Protection | IP66 | IP66 | IP67 |
| Compute | Dual industrial processors | Triple industrial processors | Triple industrial processors |
| Autonomous navigation | Limited / configuration-dependent | Included | Included |
| Best fit | Industrial mobility | Autonomy, research, logistics | Higher-payload industrial deployment |
Choose M20 Standard
Choose standard M20 when you need the core wheel-leg mobility platform without the full Pro navigation/compute package.
Choose M20 Pro
Choose M20 Pro for autonomous navigation, triple onboard compute, dual LiDAR and a strong balance of payload, portability and terrain performance.
Choose M20S
Choose M20S when the newer 35 kg payload class, IP67 protection and higher mobility envelope justify the newer industrial platform.
Commercial applications
What Is the LYNX M20 Pro Used For?
Industrial Inspection
Carry inspection cameras, thermal sensors or communications hardware through mixed indoor-outdoor infrastructure.
Power & Utility Patrol
The dual-LiDAR autonomous-navigation stack can support mapped patrol and repeated inspection routes.
Last-Meter Logistics
The wheel-leg design can bridge the gap between fast flat-ground travel and curbs, steps or unpaved sections near the delivery destination.
Emergency Response
Remote sensing and terrain adaptability can reduce human exposure during reconnaissance of unstable or hazardous areas.
Research & Education
Universities and advanced labs can use the M20 Pro for ROS 2, locomotion, reinforcement-learning and autonomous-navigation research.
Scientific Field Exploration
The rugged chassis, IP66 protection and wide temperature range suit controlled outdoor research projects.
Buyer limitations
Important LYNX M20 Pro Limitations Before Buying
-
5 m/s is a lab-tested extreme:
the published field operating speed is approximately 2 m/s. -
50 kg is not the normal payload:
the effective payload is approximately 15 kg. -
Weight figures vary:
newer manufacturer data says ~35 kg while older material often says 33 kg. -
Firmware matters:
older documentation lists some perception features as OTA-dependent. -
Autonomous deployment still requires commissioning:
mapping, routes, safety zones and mission logic must be validated at the actual site. -
M20S is now the higher-performance industrial option:
buyers needing much more payload or IP67 should compare the newer platform. -
SDK development can affect warranty:
damage caused through low-level SDK use may not be covered. -
“EDU” is not a separate manufacturer edition:
treat education/research packaging as a seller bundle unless the quotation states otherwise.
Price & procurement
LYNX M20 Pro Price and Cost
AI Robot Supplier currently lists the LYNX M20 Pro price at $29,997.
DEEP Robotics’ official US shop currently lists M20 Pro at approximately $61,200. Other current professional sellers range from roughly $39,900 to more than €57,000 depending on package, taxes, batteries, controller and support.
This large price spread means the buyer should compare the complete supplied package rather than the model name alone.
Before you buy LYNX M20 Pro, confirm:
- exact M20 Pro hardware revision
- actual delivered weight
- 15 kg effective payload
- dual 96-line LiDAR
- dual wide-angle cameras
- triple industrial compute
- SLAM/autonomous-navigation software
- two batteries if included
- charging hub
- remote controller
- transport case
- optional autonomous charger if required
- SDK / ROS 2 access
- warranty scope
- freight, insurance, customs and taxes
Check M20 Pro Price and Availability
Send your country, organisation, payload, route, terrain and development requirements for a destination-specific quotation.
Package contents
What Is Included With LYNX M20 Pro?
DEEP Robotics’ user manual provides the following manufacturer package reference, but dealer packages can differ. The final quotation should control the packing list.
M20 Pro Robot
The wheeled-legged robot chassis without batteries installed.
Controller ×1
Manufacturer package reference includes one handheld controller.
Replaceable Batteries ×2
The manufacturer manual lists two replaceable batteries.
Charging Hub ×1
Supports charging of the robot battery set.
Transport Case ×1
Professional transport/storage case listed in the manufacturer package.
Documentation & Cable Kit
Warranty card, user manual, certificate and cable kit are listed in the manual package reference.
Warranty & support
LYNX M20 Pro Warranty
DEEP Robotics’ official M20 Pro manual lists different warranty periods by component:
- Joint modules: 6 months
- Replaceable battery: 1 year
- Wide-angle cameras: 1 year
- LiDAR / laser radar: 1 year
- Control system and other electronics: 1 year
- Shell, tyres, transport case and other fragile/accessory parts: generally excluded
Warranty begins from receipt according to the manual. Damage caused by unauthorized modification, excessive payload, non-original batteries or improper SDK/control use may not qualify for free warranty service.
International procurement
LYNX M20 Pro Shipping and Import Considerations
United States & Canada
Confirm current import requirements, battery documentation, radio/controller compliance and warranty support.
European Union
Confirm VAT, customs responsibilities, conformity documentation and economic-operator requirements.
United Kingdom
Confirm import VAT, duties, battery handling and return-freight responsibilities.
UAE & GCC
Request a delivered quotation covering freight, customs, insurance and site delivery.
Africa
Confirm freight routing, lithium-battery documentation, customs and technical support arrangements.
Asia-Pacific
Confirm destination import rules, radio equipment requirements and the exact supplied package.
Official technical resources
LYNX M20 Pro Documentation and Developer Resources
DEEP Robotics LYNX M20 Specifications
Current manufacturer specifications for the M20, M20 Pro and M20S family.
M20 Pro User Manual
Official safety, operation, battery, package, maintenance and warranty information.
M20 ROS 2 SDK Deployment
Official sim-to-sim and sim-to-real ROS 2 development repository for M20/M20 Pro.
M20 Android SDK
Official Android development SDK for connection, state, remote-control and operator-app integration.
Official manufacturer video
Official DEEP Robotics LYNX M20 Series Unboxing Guide
This official DEEP Robotics video covers the LYNX M20 series setup workflow. Exact M20 Pro package contents should still be confirmed with the final quotation.
Procurement checklist
LYNX M20 Pro Buying Checklist
- exact LYNX M20 Pro model confirmed
- hardware revision confirmed
- delivered weight confirmed
- 15 kg effective payload confirmed
- dual 96-line LiDAR confirmed
- dual cameras confirmed
- triple industrial compute confirmed
- SLAM/autonomous-navigation software confirmed
- firmware / OTA state confirmed
- battery quantity confirmed
- charging hub confirmed
- remote controller confirmed
- transport case confirmed
- ROS 2 / SDK access confirmed if required
- warranty periods confirmed
- international freight confirmed
- battery shipping documentation confirmed
- duties and taxes responsibility confirmed
- target delivery date confirmed
Buyer questions
LYNX M20 Pro FAQ
Common questions for industrial, logistics, inspection and research buyers.
How much does LYNX M20 Pro cost?
AI Robot Supplier currently lists M20 Pro at $29,997. DEEP Robotics’ official US store currently lists $61,200, while other dealers vary materially according to package and region.
Where can I buy LYNX M20 Pro?
AI Robot Supplier offers the M20 Pro for commercial procurement and international quotation. Confirm the exact configuration and package contents before payment.
How much does LYNX M20 Pro weigh?
The newest global DEEP Robotics product page lists approximately 35 kg with battery. Older brochures and some current seller pages still show 33 kg.
How much can LYNX M20 Pro carry?
DEEP Robotics publishes approximately 15 kg effective payload and a 50 kg maximum-load reference. Use the 15 kg effective value for normal mission planning.
How fast is LYNX M20 Pro?
The lab-tested maximum is approximately 5 m/s. The published field operating speed is approximately 2 m/s.
How long does the M20 Pro battery last?
Published endurance is approximately three hours / 15 km unloaded and approximately 2.5 hours / 12 km with 15 kg payload.
How long does M20 Pro take to charge?
The current web specification lists roughly 1.5 hours per battery. The user manual gives a wider 1.5–2 hour reference depending on conditions.
Does M20 Pro have LiDAR?
Yes. It uses two 96-line LiDAR sensors with approximately 360° × 90° field of view and roughly 860,000 points per second.
Does LYNX M20 Pro navigate autonomously?
Yes. The Pro configuration includes SLAM mapping and autonomous navigation. Confirm the current firmware state for obstacle-avoidance and point-cloud functions.
Does M20 Pro support ROS 2?
Yes. DEEP Robotics now publishes an official M20/M20 Pro ROS 2 sim-to-sim and sim-to-real deployment repository.
Does M20 Pro support an Android SDK?
Yes. DEEP Robotics publishes an Android SDK supporting connection, state management, remote control and custom operator-app development for M20 and M20 Pro.
What is the difference between M20 and M20 Pro?
The mechanical platform is similar, but M20 Pro uses stronger onboard compute and adds the more complete SLAM/autonomous-navigation and expansion configuration.
What is the difference between M20 Pro and M20S?
M20S is the newer higher-performance industrial upgrade with much higher effective payload, IP67 protection and higher lab-tested speed.
Is LYNX M20 Pro waterproof?
The robot is rated IP66, meaning strong dust protection and protection against powerful water jets. It should not be described as fully waterproof for unrestricted submersion.
What temperature can M20 Pro operate in?
DEEP Robotics publishes an operating-temperature range of approximately −20°C to 55°C.
Is “M20 Pro EDU” an official DEEP Robotics model?
DEEP Robotics’ own model name is LYNX M20 Pro. Some sellers use “EDU” to describe education/research packages, but it is not presented as a separate manufacturer model on the current official product table.
What warranty does M20 Pro have?
The official manual lists six months for joint modules and one year for batteries, cameras, LiDAR, the control system and other electronic components. Shell, tyres, transport case and other fragile/accessory parts are generally excluded.
Can LYNX M20 Pro be shipped internationally?
International procurement can be arranged for supported destinations. Freight, lithium-battery handling, insurance, customs, taxes and local compliance requirements should be confirmed before purchase.
Industrial wheel-legged robotics
Buy DEEP Robotics LYNX M20 Pro
Request a destination-specific quotation with your country, organisation, payload, route, terrain and development requirements. Hardware revision, batteries, controller, autonomy software, warranty and international shipping can be confirmed before order approval.
