Keenon DINERBOT T3 Enclosed Delivery Robot
Keenon DINERBOT T3 Enclosed Delivery Robot is an autonomous mobile robot from KEENON. Specifications Dimensions(WxDxH): 49.6 x 62.3 x 135.1cm (19.53″ x 24.53″ x 53.19″) Weight: 71kg (156lbs) Moving Speed: 0.1-1.0m/s(0.33-3.28ft/s) Battery Life*: Up to 12h Slope Angle: 5° Layer Size: 42.2 x 57.5cm (16.61″ x 22.64″) Total Load Capacity: 40kg (88lbs) Minimum Passage Width: 75cm (29.53″)
Keenon DINERBOT T3 Enclosed Delivery Robot technical overview
Keenon DINERBOT T3 Enclosed Delivery Robot is an autonomous mobile robot from KEENON. Specifications Dimensions(WxDxH): 49.6 x 62.3 x 135.1cm (19.53″ x 24.53″ x 53.19″) Weight: 71kg (156lbs) Moving Speed: 0.1-1.0m/s(0.33-3.28ft/s) Battery Life*: Up to 12h Slope Angle: 5° Layer Size: 42.2 x 57.5cm (16.61″ x 22.64″) Total Load Capacity: 40kg (88lbs) Minimum Passage Width: 75cm (29.53″)
For healthcare procurement managers, the T3’s advantage over the dedicated medical delivery platforms is its dual applicability: the same unit that delivers patient meals during service periods can deliver supplies during off-peak hours, using the same enclosed cabin with password protection for controlled access to specific deliveries.
For procurement, match the exact model or part number, included accessories, configuration and condition to the written quotation before installation or deployment.
Three checks before purchase
Match model, part number and serial or product-label details to the quotation.
Review system, accessory, software, power and facility requirements that apply to this product.
Confirm condition, included items, warranty, documentation and delivery terms before payment.
Keenon DINERBOT T3 Enclosed Delivery Robot images
Use the product media and final exact-unit photographs to confirm configuration and condition before shipment.
Important Keenon DINERBOT T3 Enclosed Delivery Robot details
The points below summarize model-specific information supported by manufacturer, regulatory or technical documentation.
Specifications Dimensions(WxDxH): 49.6 x 62.3 x 135.1cm (19.53″ x 24.53″ x 53.19″)
Specifications Dimensions(WxDxH): 49.6 x 62.3 x 135.1cm (19.53″ x 24.53″ x 53.19″) Weight: 71kg (156lbs) Moving Speed: 0.1-1.0m/s(0.33-3.28ft/s) Battery Life*: Up to 12h Slope Angle: 5° Layer Size: 42.2 x 57.5cm (16.61″ x 22.64″) Total Load Capacity: 40kg (88lbs) Minimum Passage Width: 75cm (29.53″)
For healthcare procurement managers, the T3’s advantage over the dedicated medical
For healthcare procurement managers, the T3’s advantage over the dedicated medical delivery platforms is its dual applicability: the same unit that delivers patient meals during service periods can deliver supplies during off-peak hours, using the same enclosed cabin with password protection for controlled access to specific deliveries.
The BUTLERBOT W3 is specifically designed for in-room hotel delivery, with multi-floor
The BUTLERBOT W3 is specifically designed for in-room hotel delivery, with multi-floor elevator navigation, enclosed hygienic compartments, and password-protected individual compartment access for autonomous room-to-room delivery throughout a hotel building.
The 69-centimeter tall compartment (with layers removed or set to maximum height)
The 69-centimeter tall compartment (with layers removed or set to maximum height) accommodates IV bags, infusion equipment, large pharmaceutical packages, multi-item supply deliveries, and tall items that would not fit in the standard layer configurations.
Deployment Contexts: A Procurement Guide Hospital and Healthcare Facility Food Service
Deployment Contexts: A Procurement Guide Hospital and Healthcare Facility Food Service The T3’s primary healthcare deployment context is hospital and healthcare facility food service: delivering patient meals from the central kitchen to ward delivery points or individual room delivery, where the enclosed cabin maintains food hygiene across the journey and the UV lamp disinfects the cabin between patients’ meal cycles.
Where Keenon DINERBOT T3 Enclosed Delivery Robot can fit
Suitability depends on the exact configuration, compatible systems, intended professional use and manufacturer instructions.
Material movement and intralogistics
Evaluate Keenon DINERBOT T3 Enclosed Delivery Robot for autonomous transport, line-side delivery, warehouse or facility workflows supported by its payload and navigation configuration.
Fleet and software integration
Confirm fleet-management software, API/WMS/MES integration, maps, traffic control and charging strategy.
Payload and top-module fit
Match payload, lift/conveyor/rack modules and docking interfaces to the material-handling process.
Site readiness
Review floor condition, slopes, aisle width, safety zones, wireless coverage and commissioning requirements.
Keenon DINERBOT T3 Enclosed Delivery Robot specifications and identification
The table summarizes confirmed model and technical information confirmed from product specifications and technical documentation. Configuration-sensitive values should be checked against the exact supplied unit.
- Product
- Keenon DINERBOT T3 Enclosed Delivery Robot
- Manufacturer / brand
- KEENON
- Model / part reference
- DINERBOT T3
- Equipment type
- Autonomous Mobile Robot
- Origin
- China
What to verify before ordering Keenon DINERBOT T3 Enclosed Delivery Robot
Use this checklist to reduce configuration, compatibility and acceptance problems.
- Exact robot model, revision and manufacturer part reference
- Payload, reach, mobility, speed or working-envelope requirements relevant to the application
- Battery, charging, runtime and power requirements where applicable
- Controller, SDK/API, network interfaces and software compatibility
- Sensors, end effectors, safety systems and included accessories
- Operating environment, floor/terrain, IP rating and commissioning requirements
Keenon DINERBOT T3 Enclosed Delivery Robot manufacturer and technical resources
Manufacturer and regulatory references are prioritized so buyers can verify identity, compatibility and configuration-sensitive information.
KEENON official technical resource
Technical or regulatory resource relevant to Keenon DINERBOT T3 Enclosed Delivery Robot evaluation.
Frequently asked questions
Key questions for evaluating Keenon DINERBOT T3 Enclosed Delivery Robot before purchase.
What is Keenon DINERBOT T3 Enclosed Delivery Robot?
Specifications Dimensions(WxDxH): 49.6 x 62.3 x 135.1cm (19.53″ x 24.53″ x 53.19″) Weight: 71kg (156lbs) Moving Speed: 0.1-1.0m/s(0.33-3.28ft/s) Battery Life*: Up to 12h Slope Angle: 5° Layer Size: 42.2 x 57.5cm (16.61″ x 22.64″) Total Load Capacity: 40kg (88lbs) Minimum Passage Width: 75cm (29.53″)
What should be checked before ordering Keenon DINERBOT T3 Enclosed Delivery Robot?
Exact robot model, revision and manufacturer part reference; Payload, reach, mobility, speed or working-envelope requirements relevant to the application; Battery, charging, runtime and power requirements where applicable.
Are all Keenon DINERBOT T3 Enclosed Delivery Robot configurations identical?
No. Hardware revision, software, accessories, modules, handpieces, probes or other options can vary. The written quotation and exact-unit identification should define the supplied configuration.
What is included with Keenon DINERBOT T3 Enclosed Delivery Robot?
Only items explicitly listed in the quotation and packing scope should be treated as included. Reference photographs can show accessories or system components that are not part of the final offer.
Can Keenon DINERBOT T3 Enclosed Delivery Robot be shipped internationally?
International B2B delivery can be arranged for approved destinations subject to product-specific transport requirements, customs rules and the agreed freight, insurance and delivery terms.
KEENON documentation for Keenon DINERBOT T3 Enclosed Delivery Robot
Manufacturer names and trademarks are used for product identification. Confirm model-specific instructions, compatibility and regional requirements before use.
Procurement support for Keenon DINERBOT T3 Enclosed Delivery Robot
Model, label/serial information, condition and supplied configuration can be confirmed before dispatch.
Quotation, packing scope, warranty terms and delivery responsibilities are documented before order approval.
Export packing, freight, insurance and shipment documentation can be coordinated for approved destinations.
Support is available for configuration questions, installation planning and procurement documentation.
Request a quote for Keenon DINERBOT T3 Enclosed Delivery Robot
Include delivery country, quantity, required configuration and target purchase date for a destination-specific offer.
