SIASUN Collaborative Robot (GCR20-1400)
SIASUN Collaborative Robot (GCR20-1400) is a Collaborative Robot from SIASUN. Advantages / Benefits Higher payload collaborative category A 20 kg payload enables: Larger grippers and tooling Multi-part picks Handling heavier components without moving to a full industrial robot cell (depending on safety/risk assessment) Broad workspace coverage A 1400 mm reach can reduce the need for linear rails in some applications and allows.
SIASUN Collaborative Robot (GCR20-1400) technical overview
SIASUN Collaborative Robot (GCR20-1400) is a Collaborative Robot from SIASUN. Advantages / Benefits Higher payload collaborative category A 20 kg payload enables: Larger grippers and tooling Multi-part picks Handling heavier components without moving to a full industrial robot cell (depending on safety/risk assessment) Broad workspace coverage A 1400 mm reach can reduce the need for linear rails in some applications and allows.
Technology and Specifications Core specifications Published parameters for the GCR20-1400 include: Payload (rated load): 20 kg Degrees of freedom: 6 Workspace radius (reach): 1400 mm Repeatability: ±0.05 mm Robot mass: 66 kg These values place it among collaborative robot options intended for heavier handling, larger end-effectors, or multi-part picks compared with smaller 3–10 kg class cobots.
For procurement, match the exact model or part number, included accessories, configuration and condition to the written quotation before installation or deployment.
Three checks before purchase
Match model, part number and serial or product-label details to the quotation.
Review system, accessory, software, power and facility requirements that apply to this product.
Confirm condition, included items, warranty, documentation and delivery terms before payment.
SIASUN Collaborative Robot (GCR20-1400) images
Use the product media and final exact-unit photographs to confirm configuration and condition before shipment.
Important SIASUN Collaborative Robot (GCR20-1400) details
The points below summarize model-specific information supported by manufacturer, regulatory or technical documentation.
Advantages / Benefits Higher payload collaborative category A 20 kg payload enables
Advantages / Benefits Higher payload collaborative category A 20 kg payload enables: Larger grippers and tooling Multi-part picks Handling heavier components without moving to a full industrial robot cell (depending on safety/risk assessment) Broad workspace coverage A 1400 mm reach can reduce the need for linear rails in some applications and allows coverage across wider worktables or multi-station fixtures.
Technology and Specifications Core specifications Published parameters for the
Technology and Specifications Core specifications Published parameters for the GCR20-1400 include: Payload (rated load): 20 kg Degrees of freedom: 6 Workspace radius (reach): 1400 mm Repeatability: ±0.05 mm Robot mass: 66 kg These values place it among collaborative robot options intended for heavier handling, larger end-effectors, or multi-part picks compared with smaller 3–10 kg class cobots.
Summary The SIASUN Collaborative Robot GCR20-1400 is a 6-axis cobot platform defined by
Summary The SIASUN Collaborative Robot GCR20-1400 is a 6-axis cobot platform defined by its 20 kg payload, 1400 mm reach, and ±0.05 mm repeatability, supporting flexible automation across assembly, machine tending, handling, and inspection workflows.
Key benefits include 20 kg payload capacity, 1400 mm workspace radius, 6-DOF motion
Key benefits include 20 kg payload capacity, 1400 mm workspace radius, 6-DOF motion, multiple mounting orientations (including upside-down), and an IP54 rating for typical indoor industrial environments.
The SIASUN GCR20-1400 is a 6-axis collaborative robot arm with a 20 kg rated payload
The SIASUN GCR20-1400 is a 6-axis collaborative robot arm with a 20 kg rated payload and a 1400 mm reach, designed for flexible automation in shared workspaces.
Where SIASUN Collaborative Robot (GCR20-1400) can fit
Suitability depends on the exact configuration, compatible systems, intended professional use and manufacturer instructions.
Robotics deployment
Evaluate SIASUN Collaborative Robot (GCR20-1400) for the documented robotics workflow supported by its exact hardware, payload and software configuration.
Software and systems integration
Confirm controller, SDK/API, network interfaces, sensors and supported third-party integrations.
Operational fit
Match payload, mobility, reach, runtime, environment and safety requirements to the intended task.
Commissioning and support
Confirm charging/power, accessories, training, spare parts and acceptance testing before deployment.
SIASUN Collaborative Robot (GCR20-1400) specifications and identification
The table summarizes confirmed model and technical information confirmed from product specifications and technical documentation. Configuration-sensitive values should be checked against the exact supplied unit.
- Product
- SIASUN Collaborative Robot (GCR20-1400)
- Manufacturer / brand
- SIASUN
- Model / part reference
- SIASUN Collaborative Robot (GCR20-1400)
- Equipment type
- Collaborative Robot
- Origin
- China
What to verify before ordering SIASUN Collaborative Robot (GCR20-1400)
Use this checklist to reduce configuration, compatibility and acceptance problems.
- Exact robot model, revision and manufacturer part reference
- Payload, reach, mobility, speed or working-envelope requirements relevant to the application
- Battery, charging, runtime and power requirements where applicable
- Controller, SDK/API, network interfaces and software compatibility
- Sensors, end effectors, safety systems and included accessories
- Operating environment, floor/terrain, IP rating and commissioning requirements
SIASUN Collaborative Robot (GCR20-1400) manufacturer and technical resources
Manufacturer and regulatory references are prioritized so buyers can verify identity, compatibility and configuration-sensitive information.
SIASUN official technical resource
Technical or regulatory resource relevant to SIASUN Collaborative Robot (GCR20-1400) evaluation.
SIASUN official technical resource
Technical or regulatory resource relevant to SIASUN Collaborative Robot (GCR20-1400) evaluation.
Frequently asked questions
Key questions for evaluating SIASUN Collaborative Robot (GCR20-1400) before purchase.
What is SIASUN Collaborative Robot (GCR20-1400)?
Advantages / Benefits Higher payload collaborative category A 20 kg payload enables: Larger grippers and tooling Multi-part picks Handling heavier components without moving to a full industrial robot cell (depending on safety/risk assessment) Broad workspace coverage A 1400 mm reach can reduce the need for linear.
What should be checked before ordering SIASUN Collaborative Robot (GCR20-1400)?
Exact robot model, revision and manufacturer part reference; Payload, reach, mobility, speed or working-envelope requirements relevant to the application; Battery, charging, runtime and power requirements where applicable.
Are all SIASUN Collaborative Robot (GCR20-1400) configurations identical?
No. Hardware revision, software, accessories, modules, handpieces, probes or other options can vary. The written quotation and exact-unit identification should define the supplied configuration.
What is included with SIASUN Collaborative Robot (GCR20-1400)?
Only items explicitly listed in the quotation and packing scope should be treated as included. Reference photographs can show accessories or system components that are not part of the final offer.
Can SIASUN Collaborative Robot (GCR20-1400) be shipped internationally?
International B2B delivery can be arranged for approved destinations subject to product-specific transport requirements, customs rules and the agreed freight, insurance and delivery terms.
SIASUN documentation for SIASUN Collaborative Robot (GCR20-1400)
Manufacturer names and trademarks are used for product identification. Confirm model-specific instructions, compatibility and regional requirements before use.
Procurement support for SIASUN Collaborative Robot (GCR20-1400)
Model, label/serial information, condition and supplied configuration can be confirmed before dispatch.
Quotation, packing scope, warranty terms and delivery responsibilities are documented before order approval.
Export packing, freight, insurance and shipment documentation can be coordinated for approved destinations.
Support is available for configuration questions, installation planning and procurement documentation.
Request a quote for SIASUN Collaborative Robot (GCR20-1400)
Include delivery country, quantity, required configuration and target purchase date for a destination-specific offer.
