Unitree Go2 Self-Charging Board (GO2-SCHARGB)
Unitree Go2 Self-Charging Board (GO2-SCHARGB) is a Robot Accessory from UNITREE ROBOTICS. Technology and Specifications Electrical charging specifications Across multiple independent reseller technical listings, the GO2-SCHARGB is described with the following electrical properties: Charging voltage: 33.6V Charging current: up to 9A These values align closely with the Go2 ecosystem’s fast-charge current class (9A), which is also referenced in Go2.
Unitree Go2 Self-Charging Board (GO2-SCHARGB) technical overview
Unitree Go2 Self-Charging Board (GO2-SCHARGB) is a Robot Accessory from UNITREE ROBOTICS. Technology and Specifications Electrical charging specifications Across multiple independent reseller technical listings, the GO2-SCHARGB is described with the following electrical properties: Charging voltage: 33.6V Charging current: up to 9A These values align closely with the Go2 ecosystem’s fast-charge current class (9A), which is also referenced in Go2.
Environmental specifications Commonly published values include: Working environment temperature: 5°C–40°C Storage temperature: 22°C–28°C Relative humidity: ≤95% Compatibility notes Multiple listings state that the self-charging board is intended to be used specifically with Go2 EDU models, and in some cases it is explicitly tied to Go2 EDU Plus LiDAR configurations.
For procurement, match the exact model or part number, included accessories, configuration and condition to the written quotation before installation or deployment.
Three checks before purchase
Match model, part number and serial or product-label details to the quotation.
Review system, accessory, software, power and facility requirements that apply to this product.
Confirm condition, included items, warranty, documentation and delivery terms before payment.
Unitree Go2 Self-Charging Board (GO2-SCHARGB) images
Use the product media and final exact-unit photographs to confirm configuration and condition before shipment.
Important Unitree Go2 Self-Charging Board (GO2-SCHARGB) details
The points below summarize model-specific information supported by manufacturer, regulatory or technical documentation.
Technology and Specifications Electrical charging specifications Across multiple
Technology and Specifications Electrical charging specifications Across multiple independent reseller technical listings, the GO2-SCHARGB is described with the following electrical properties: Charging voltage: 33.6V Charging current: up to 9A These values align closely with the Go2 ecosystem’s fast-charge current class (9A), which is also referenced in Go2 charging documentation for rapid charging equipment.
Environmental specifications Commonly published values include: Working environment
Environmental specifications Commonly published values include: Working environment temperature: 5°C–40°C Storage temperature: 22°C–28°C Relative humidity: ≤95% Compatibility notes Multiple listings state that the self-charging board is intended to be used specifically with Go2 EDU models, and in some cases it is explicitly tied to Go2 EDU Plus LiDAR configurations.
Intended for Go2 EDU / EDU Plus charging workflows Several suppliers explicitly state
Intended for Go2 EDU / EDU Plus charging workflows Several suppliers explicitly state the self-charging board is meant to be used together with specific Go2 variants, including: Go2 EDU Plus (Mid-360 LiDAR) Go2 EDU Plus (XT16 LiDAR) This positioning is important for buyers because Unitree’s Go2 family includes multiple models and configurations (AIR/PRO/X/EDU variants).
Higher charging power capability With commonly listed 33.6V / up to 9A charging
Higher charging power capability With commonly listed 33.6V / up to 9A charging performance, the GO2-SCHARGB is positioned for rapid charging behavior, supporting more frequent return-to-service cycles.
The board is commonly specified at 33.6V charging voltage with up to 9A charging
The board is commonly specified at 33.6V charging voltage with up to 9A charging current.
Where Unitree Go2 Self-Charging Board (GO2-SCHARGB) can fit
Suitability depends on the exact configuration, compatible systems, intended professional use and manufacturer instructions.
Robotics deployment
Evaluate Unitree Go2 Self-Charging Board (GO2-SCHARGB) for the documented robotics workflow supported by its exact hardware, payload and software configuration.
Software and systems integration
Confirm controller, SDK/API, network interfaces, sensors and supported third-party integrations.
Operational fit
Match payload, mobility, reach, runtime, environment and safety requirements to the intended task.
Commissioning and support
Confirm charging/power, accessories, training, spare parts and acceptance testing before deployment.
Unitree Go2 Self-Charging Board (GO2-SCHARGB) specifications and identification
The table summarizes confirmed model and technical information confirmed from product specifications and technical documentation. Configuration-sensitive values should be checked against the exact supplied unit.
- Product
- Unitree Go2 Self-Charging Board (GO2-SCHARGB)
- Manufacturer / brand
- UNITREE ROBOTICS
- Model / part reference
- Unitree Go2 Self-Charging Board (GO2-SCHARGB)
- Equipment type
- Robot Accessory
- Origin
- China
What to verify before ordering Unitree Go2 Self-Charging Board (GO2-SCHARGB)
Use this checklist to reduce configuration, compatibility and acceptance problems.
- Exact robot model, revision and manufacturer part reference
- Payload, reach, mobility, speed or working-envelope requirements relevant to the application
- Battery, charging, runtime and power requirements where applicable
- Controller, SDK/API, network interfaces and software compatibility
- Sensors, end effectors, safety systems and included accessories
- Operating environment, floor/terrain, IP rating and commissioning requirements
Unitree Go2 Self-Charging Board (GO2-SCHARGB) manufacturer and technical resources
Manufacturer and regulatory references are prioritized so buyers can verify identity, compatibility and configuration-sensitive information.
UNITREE ROBOTICS official technical resource
Technical or regulatory resource relevant to Unitree Go2 Self-Charging Board (GO2-SCHARGB) evaluation.
UNITREE ROBOTICS official technical resource
Technical or regulatory resource relevant to Unitree Go2 Self-Charging Board (GO2-SCHARGB) evaluation.
Frequently asked questions
Key questions for evaluating Unitree Go2 Self-Charging Board (GO2-SCHARGB) before purchase.
What is Unitree Go2 Self-Charging Board (GO2-SCHARGB)?
Technology and Specifications Electrical charging specifications Across multiple independent reseller technical listings, the GO2-SCHARGB is described with the following electrical properties: Charging voltage: 33.6V Charging current: up to 9A These values align closely with the Go2 ecosystem’s fast-charge current.
What should be checked before ordering Unitree Go2 Self-Charging Board (GO2-SCHARGB)?
Exact robot model, revision and manufacturer part reference; Payload, reach, mobility, speed or working-envelope requirements relevant to the application; Battery, charging, runtime and power requirements where applicable.
Are all Unitree Go2 Self-Charging Board (GO2-SCHARGB) configurations identical?
No. Hardware revision, software, accessories, modules, handpieces, probes or other options can vary. The written quotation and exact-unit identification should define the supplied configuration.
What is included with Unitree Go2 Self-Charging Board (GO2-SCHARGB)?
Only items explicitly listed in the quotation and packing scope should be treated as included. Reference photographs can show accessories or system components that are not part of the final offer.
Can Unitree Go2 Self-Charging Board (GO2-SCHARGB) be shipped internationally?
International B2B delivery can be arranged for approved destinations subject to product-specific transport requirements, customs rules and the agreed freight, insurance and delivery terms.
UNITREE ROBOTICS documentation for Unitree Go2 Self-Charging Board (GO2-SCHARGB)
Manufacturer names and trademarks are used for product identification. Confirm model-specific instructions, compatibility and regional requirements before use.
Procurement support for Unitree Go2 Self-Charging Board (GO2-SCHARGB)
Model, label/serial information, condition and supplied configuration can be confirmed before dispatch.
Quotation, packing scope, warranty terms and delivery responsibilities are documented before order approval.
Export packing, freight, insurance and shipment documentation can be coordinated for approved destinations.
Support is available for configuration questions, installation planning and procurement documentation.
Request a quote for Unitree Go2 Self-Charging Board (GO2-SCHARGB)
Include delivery country, quantity, required configuration and target purchase date for a destination-specific offer.
