$16,500
iTR W2 Commercial Outdoor Sweeper is a Robotics Solution from iTR Robot. Dimensions: 1.4 × 1.05 × 0.95 m Sweeping width: 105 cm Maximum mapping area: 1,000,000 m² Maximum speed: 1 m/s Water tank capacity: 42 L Container capacity: 40 L Climbing angle: ≤10° Charging mode: Automatic Weight: 165 kg Battery capacity: 120 Ah Rated.
Review the verified model information, technical details, compatibility, included configuration and documentation before requesting a destination-specific B2B quotation.
Related products, categories and research.
iTR W2 Commercial Outdoor Sweeper is a Robotics Solution from iTR Robot. Dimensions: 1.4 × 1.05 × 0.95 m Sweeping width: 105 cm Maximum mapping area: 1,000,000 m² Maximum speed: 1 m/s Water tank capacity: 42 L Container capacity: 40 L Climbing angle: ≤10° Charging mode: Automatic Weight: 165 kg Battery capacity: 120 Ah Rated voltage: 24 V Charging time: 4–5 h Runtime: 5–6 h Operating temperature: -10°C to 40°C Operating.
iTR W2 Commercial Outdoor Sweeper is a Robotics Solution from iTR Robot. Dimensions: 1.4 × 1.05 × 0.95 m Sweeping width: 105 cm Maximum mapping area: 1,000,000 m² Maximum speed: 1 m/s Water tank capacity: 42 L Container capacity: 40 L Climbing angle: ≤10° Charging mode: Automatic Weight: 165 kg Battery capacity: 120 Ah Rated voltage: 24 V Charging time: 4–5 h Runtime: 5–6 h Operating temperature: -10°C to 40°C Operating.
As a mid-tier offering between the municipal-scale W1 and indoor-focused platforms, the W2 is iTR’s primary commercial outdoor venue cleaning product for international buyers seeking autonomous outdoor cleaning capability across the full range of hard outdoor surfaces.
For procurement, match the exact model or part number, included accessories, configuration and condition to the written quotation before installation or deployment.
Match model, part number and serial or product-label details to the quotation.
Review system, accessory, software, power and facility requirements that apply to this product.
Confirm condition, included items, warranty, documentation and delivery terms before payment.
Use the product media and final exact-unit photographs to confirm configuration and condition before shipment.
The points below summarize model-specific information supported by manufacturer, regulatory or technical documentation.
Dimensions: 1.4 × 1.05 × 0.95 m Sweeping width: 105 cm Maximum mapping area: 1,000,000 m² Maximum speed: 1 m/s Water tank capacity: 42 L Container capacity: 40 L Climbing angle: ≤10° Charging mode: Automatic Weight: 165 kg Battery capacity: 120 Ah Rated voltage: 24 V Charging time: 4–5 h Runtime: 5–6 h Operating temperature: -10°C to 40°C Operating humidity: 0%–70% RH
As a mid-tier offering between the municipal-scale W1 and indoor-focused platforms, the W2 is iTR’s primary commercial outdoor venue cleaning product for international buyers seeking autonomous outdoor cleaning capability across the full range of hard outdoor surfaces.
The W2’s self-built mapping and task scheduling capability enable programmed cleaning routes across multiple campus zones, operating autonomously during low-occupancy periods without requiring manual supervision.
Summary The iTR W2 Commercial Outdoor Sweeper is a medium-scale autonomous cleaning robot from iTR Robot Technology’s iSweeper series, combining sweeping, vacuuming, and dust suppression in a 1.05-meter cleaning width platform designed for 7/24 unattended operation across parks, airports, factories, commercial plazas, campuses, and parking lots.
With a 1.05-meter cleaning width and fully autonomous operation enabling unattended 7/24 task execution, the W2 addresses the primary operational challenge of large commercial outdoor spaces: maintaining consistent cleanliness across extensive floor areas without proportional increases in cleaning labor.
Suitability depends on the exact configuration, compatible systems, intended professional use and manufacturer instructions.
Evaluate iTR W2 Commercial Outdoor Sweeper for the documented robotics workflow supported by its exact hardware, payload and software configuration.
Confirm controller, SDK/API, network interfaces, sensors and supported third-party integrations.
Match payload, mobility, reach, runtime, environment and safety requirements to the intended task.
Confirm charging/power, accessories, training, spare parts and acceptance testing before deployment.
The table summarizes confirmed model and technical information confirmed from product specifications and technical documentation. Configuration-sensitive values should be checked against the exact supplied unit.
Use this checklist to reduce configuration, compatibility and acceptance problems.
Manufacturer and regulatory references are prioritized so buyers can verify identity, compatibility and configuration-sensitive information.
Technical or regulatory resource relevant to iTR W2 Commercial Outdoor Sweeper evaluation.
Key questions for evaluating iTR W2 Commercial Outdoor Sweeper before purchase.
Dimensions: 1.4 × 1.05 × 0.95 m Sweeping width: 105 cm Maximum mapping area: 1,000,000 m² Maximum speed: 1 m/s Water tank capacity: 42 L Container capacity: 40 L Climbing angle: ≤10° Charging mode: Automatic Weight: 165 kg Battery capacity: 120 Ah Rated voltage: 24 V Charging time: 4–5 h Runtime: 5–6 h Operating.
Exact robot model, revision and manufacturer part reference; Payload, reach, mobility, speed or working-envelope requirements relevant to the application; Battery, charging, runtime and power requirements where applicable.
No. Hardware revision, software, accessories, modules, handpieces, probes or other options can vary. The written quotation and exact-unit identification should define the supplied configuration.
Only items explicitly listed in the quotation and packing scope should be treated as included. Reference photographs can show accessories or system components that are not part of the final offer.
International B2B delivery can be arranged for approved destinations subject to product-specific transport requirements, customs rules and the agreed freight, insurance and delivery terms.
Manufacturer names and trademarks are used for product identification. Confirm model-specific instructions, compatibility and regional requirements before use.
Model, label/serial information, condition and supplied configuration can be confirmed before dispatch.
Quotation, packing scope, warranty terms and delivery responsibilities are documented before order approval.
Export packing, freight, insurance and shipment documentation can be coordinated for approved destinations.
Support is available for configuration questions, installation planning and procurement documentation.
Include delivery country, quantity, required configuration and target purchase date for a destination-specific offer.
Tell us what you need — we respond within one business day.
