Keenon DINERBOT T8 is an autonomous mobile robot from KEENON. Multi-Sensor SLAM Navigation The T8’s navigation fuses data from LiDAR, encoders, gyroscopes (IMU), image modules, UWB, and lidarodom into a unified SLAM positioning system.
Review the verified model information, technical details, compatibility, included configuration and documentation before requesting a destination-specific B2B quotation.
Related products, categories and research.
Keenon DINERBOT T8 is an autonomous mobile robot from KEENON. Multi-Sensor SLAM Navigation The T8’s navigation fuses data from LiDAR, encoders, gyroscopes (IMU), image modules, UWB, and lidarodom into a unified SLAM positioning system.
Keenon DINERBOT T8 is an autonomous mobile robot from KEENON. Multi-Sensor SLAM Navigation The T8’s navigation fuses data from LiDAR, encoders, gyroscopes (IMU), image modules, UWB, and lidarodom into a unified SLAM positioning system.
Moving Speed: 1.0m/s (3.28ft/s) Battery Life*: Up to 15h Charging Time**: 4h Slope Angle: 5° Total Load Capacity: 20 kg (44 lbs) Minimum Passage Width: 55 cm (21.65″)
For procurement, match the exact model or part number, included accessories, configuration and condition to the written quotation before installation or deployment.
Match model, part number and serial or product-label details to the quotation.
Review system, accessory, software, power and facility requirements that apply to this product.
Confirm condition, included items, warranty, documentation and delivery terms before payment.
Use the product media and final exact-unit photographs to confirm configuration and condition before shipment.
The points below summarize model-specific information supported by manufacturer, regulatory or technical documentation.
Multi-Sensor SLAM Navigation The T8’s navigation fuses data from LiDAR, encoders, gyroscopes (IMU), image modules, UWB, and lidarodom into a unified SLAM positioning system.
Moving Speed: 1.0m/s (3.28ft/s) Battery Life*: Up to 15h Charging Time**: 4h Slope Angle: 5° Total Load Capacity: 20 kg (44 lbs) Minimum Passage Width: 55 cm (21.65″)
The “2+1” designation refers to two forward stereo cameras providing depth perception in the primary travel direction plus one additional sensor covering an offset zone, together achieving 204 degrees of continuous 3D coverage.
15-hour battery for coverage from breakfast through late service: The full-day endurance eliminates the recharging interruption that would otherwise require manual staff involvement.
The T11 navigates to 49 centimeters (versus the T8’s 55 cm) and adds a 18.5-inch advertising screen and five-sensor VSLAM navigation.
Suitability depends on the exact configuration, compatible systems, intended professional use and manufacturer instructions.
Evaluate Keenon DINERBOT T8 for autonomous transport, line-side delivery, warehouse or facility workflows supported by its payload and navigation configuration.
Confirm fleet-management software, API/WMS/MES integration, maps, traffic control and charging strategy.
Match payload, lift/conveyor/rack modules and docking interfaces to the material-handling process.
Review floor condition, slopes, aisle width, safety zones, wireless coverage and commissioning requirements.
The table summarizes confirmed model and technical information confirmed from product specifications and technical documentation. Configuration-sensitive values should be checked against the exact supplied unit.
Use this checklist to reduce configuration, compatibility and acceptance problems.
Manufacturer and regulatory references are prioritized so buyers can verify identity, compatibility and configuration-sensitive information.
Technical or regulatory resource relevant to Keenon DINERBOT T8 evaluation.
Key questions for evaluating Keenon DINERBOT T8 before purchase.
Multi-Sensor SLAM Navigation The T8’s navigation fuses data from LiDAR, encoders, gyroscopes (IMU), image modules, UWB, and lidarodom into a unified SLAM positioning system.
Exact robot model, revision and manufacturer part reference; Payload, reach, mobility, speed or working-envelope requirements relevant to the application; Battery, charging, runtime and power requirements where applicable.
No. Hardware revision, software, accessories, modules, handpieces, probes or other options can vary. The written quotation and exact-unit identification should define the supplied configuration.
Only items explicitly listed in the quotation and packing scope should be treated as included. Reference photographs can show accessories or system components that are not part of the final offer.
International B2B delivery can be arranged for approved destinations subject to product-specific transport requirements, customs rules and the agreed freight, insurance and delivery terms.
Manufacturer names and trademarks are used for product identification. Confirm model-specific instructions, compatibility and regional requirements before use.
Model, label/serial information, condition and supplied configuration can be confirmed before dispatch.
Quotation, packing scope, warranty terms and delivery responsibilities are documented before order approval.
Export packing, freight, insurance and shipment documentation can be coordinated for approved destinations.
Support is available for configuration questions, installation planning and procurement documentation.
Include delivery country, quantity, required configuration and target purchase date for a destination-specific offer.
Tell us what you need — we respond within one business day.
