KLEENBOT C55 is an autonomous mobile robot from KEENON. Key specifications: dimensions 860×850×1,082 mm (including squeegee), weight 150 kg, 55 cm cleaning width, 60-liter clean water tank, 47-liter wastewater tank, 21,000 Pa suction, 30-second post-scrub floor drying, triple-roller dry-wet separation design.
Review the verified model information, technical details, compatibility, included configuration and documentation before requesting a destination-specific B2B quotation.
Related products, categories and research.
KLEENBOT C55 is an autonomous mobile robot from KEENON. Key specifications: dimensions 860×850×1,082 mm (including squeegee), weight 150 kg, 55 cm cleaning width, 60-liter clean water tank, 47-liter wastewater tank, 21,000 Pa suction, 30-second post-scrub floor drying, triple-roller dry-wet separation design, 11.6-inch interactive screen, and 4-hour charge time.
KLEENBOT C55 is an autonomous mobile robot from KEENON. Key specifications: dimensions 860×850×1,082 mm (including squeegee), weight 150 kg, 55 cm cleaning width, 60-liter clean water tank, 47-liter wastewater tank, 21,000 Pa suction, 30-second post-scrub floor drying, triple-roller dry-wet separation design, 11.6-inch interactive screen, and 4-hour charge time.
Terminal floor areas of 10,000 to 50,000 square meters require scrubbing across multiple operational hours, and the 60-liter water tank enables extended uninterrupted cleaning runs that reduce the management overhead of the cleaning operation.
For procurement, match the exact model or part number, included accessories, configuration and condition to the written quotation before installation or deployment.
Match model, part number and serial or product-label details to the quotation.
Review system, accessory, software, power and facility requirements that apply to this product.
Confirm condition, included items, warranty, documentation and delivery terms before payment.
Use the product media and final exact-unit photographs to confirm configuration and condition before shipment.
The points below summarize model-specific information supported by manufacturer, regulatory or technical documentation.
Key specifications: dimensions 860×850×1,082 mm (including squeegee), weight 150 kg, 55 cm cleaning width, 60-liter clean water tank, 47-liter wastewater tank, 21,000 Pa suction, 30-second post-scrub floor drying, triple-roller dry-wet separation design, 11.6-inch interactive screen, and 4-hour charge time.
Terminal floor areas of 10,000 to 50,000 square meters require scrubbing across multiple operational hours, and the 60-liter water tank enables extended uninterrupted cleaning runs that reduce the management overhead of the cleaning operation.
KEENON KLEENBOT C55: The Professional Medium-to-Large Area Autonomous Scrubbing Robot KEENON’s ISSA North America Expo press release specifies the C55’s three core innovations: “Enhanced Cleanliness: Its triple-roller dry-wet separation design ensures scrubbing with clean water to prevent cross-contamination.
Combined with 21,000 Pa powerful suction, the robot leaves floors dry in 30 seconds without any streaks.” The 30-second floor drying time directly addresses the primary safety concern associated with wet floor scrubbing in high-traffic commercial facilities: the slip hazard created when floors remain wet after cleaning.KEENON confirmed its global market leadership at the ISSA event: “KEENON Robotics continues to secure the No.
The C55’s position at the top of this hierarchy reflects its design for the commercial scale that the smaller KLEENBOT platforms cannot serve in a single session: airports, hospitals, shopping centers, large hotels, and distribution warehouse facilities where the floor area requiring daily or periodic scrubbing exceeds what any 16-liter tank system can cover without multiple refill stops.
Suitability depends on the exact configuration, compatible systems, intended professional use and manufacturer instructions.
Evaluate KLEENBOT C55 for autonomous transport, line-side delivery, warehouse or facility workflows supported by its payload and navigation configuration.
Confirm fleet-management software, API/WMS/MES integration, maps, traffic control and charging strategy.
Match payload, lift/conveyor/rack modules and docking interfaces to the material-handling process.
Review floor condition, slopes, aisle width, safety zones, wireless coverage and commissioning requirements.
The table summarizes confirmed model and technical information confirmed from product specifications and technical documentation. Configuration-sensitive values should be checked against the exact supplied unit.
Use this checklist to reduce configuration, compatibility and acceptance problems.
Manufacturer and regulatory references are prioritized so buyers can verify identity, compatibility and configuration-sensitive information.
Technical or regulatory resource relevant to KLEENBOT C55 evaluation.
Key questions for evaluating KLEENBOT C55 before purchase.
Key specifications: dimensions 860×850×1,082 mm (including squeegee), weight 150 kg, 55 cm cleaning width, 60-liter clean water tank, 47-liter wastewater tank, 21,000 Pa suction, 30-second post-scrub floor drying, triple-roller dry-wet separation design, 11.6-inch interactive screen, and 4-hour charge time.
Exact robot model, revision and manufacturer part reference; Payload, reach, mobility, speed or working-envelope requirements relevant to the application; Battery, charging, runtime and power requirements where applicable.
No. Hardware revision, software, accessories, modules, handpieces, probes or other options can vary. The written quotation and exact-unit identification should define the supplied configuration.
Only items explicitly listed in the quotation and packing scope should be treated as included. Reference photographs can show accessories or system components that are not part of the final offer.
International B2B delivery can be arranged for approved destinations subject to product-specific transport requirements, customs rules and the agreed freight, insurance and delivery terms.
Manufacturer names and trademarks are used for product identification. Confirm model-specific instructions, compatibility and regional requirements before use.
Model, label/serial information, condition and supplied configuration can be confirmed before dispatch.
Quotation, packing scope, warranty terms and delivery responsibilities are documented before order approval.
Export packing, freight, insurance and shipment documentation can be coordinated for approved destinations.
Support is available for configuration questions, installation planning and procurement documentation.
Include delivery country, quantity, required configuration and target purchase date for a destination-specific offer.
Add to Cart — $29,232
Tell us what you need — we respond within one business day.