Keenon DINERBOT T3 Enclosed Delivery Robot is an autonomous mobile robot from KEENON. Specifications Dimensions(WxDxH): 49.6 x 62.3 x 135.1cm (19.53″ x 24.53″ x 53.19″) Weight: 71kg (156lbs) Moving Speed: 0.1-1.0m/s(0.33-3.28ft/s) Battery Life*: Up to 12h Slope Angle: 5° Layer Size: 42.2 x 57.5cm (16.61″ x 22.64″) Total Load Capacity: 40kg.
Review the verified model information, technical details, compatibility, included configuration and documentation before requesting a destination-specific B2B quotation.
Related products, categories and research.
Keenon DINERBOT T3 Enclosed Delivery Robot is an autonomous mobile robot from KEENON. Specifications Dimensions(WxDxH): 49.6 x 62.3 x 135.1cm (19.53″ x 24.53″ x 53.19″) Weight: 71kg (156lbs) Moving Speed: 0.1-1.0m/s(0.33-3.28ft/s) Battery Life*: Up to 12h Slope Angle: 5° Layer Size: 42.2 x 57.5cm (16.61″ x 22.64″) Total Load Capacity: 40kg (88lbs) Minimum Passage Width: 75cm (29.53″)
Keenon DINERBOT T3 Enclosed Delivery Robot is an autonomous mobile robot from KEENON. Specifications Dimensions(WxDxH): 49.6 x 62.3 x 135.1cm (19.53″ x 24.53″ x 53.19″) Weight: 71kg (156lbs) Moving Speed: 0.1-1.0m/s(0.33-3.28ft/s) Battery Life*: Up to 12h Slope Angle: 5° Layer Size: 42.2 x 57.5cm (16.61″ x 22.64″) Total Load Capacity: 40kg (88lbs) Minimum Passage Width: 75cm (29.53″)
For healthcare procurement managers, the T3’s advantage over the dedicated medical delivery platforms is its dual applicability: the same unit that delivers patient meals during service periods can deliver supplies during off-peak hours, using the same enclosed cabin with password protection for controlled access to specific deliveries.
For procurement, match the exact model or part number, included accessories, configuration and condition to the written quotation before installation or deployment.
Match model, part number and serial or product-label details to the quotation.
Review system, accessory, software, power and facility requirements that apply to this product.
Confirm condition, included items, warranty, documentation and delivery terms before payment.
Use the product media and final exact-unit photographs to confirm configuration and condition before shipment.
The points below summarize model-specific information supported by manufacturer, regulatory or technical documentation.
Specifications Dimensions(WxDxH): 49.6 x 62.3 x 135.1cm (19.53″ x 24.53″ x 53.19″) Weight: 71kg (156lbs) Moving Speed: 0.1-1.0m/s(0.33-3.28ft/s) Battery Life*: Up to 12h Slope Angle: 5° Layer Size: 42.2 x 57.5cm (16.61″ x 22.64″) Total Load Capacity: 40kg (88lbs) Minimum Passage Width: 75cm (29.53″)
For healthcare procurement managers, the T3’s advantage over the dedicated medical delivery platforms is its dual applicability: the same unit that delivers patient meals during service periods can deliver supplies during off-peak hours, using the same enclosed cabin with password protection for controlled access to specific deliveries.
The BUTLERBOT W3 is specifically designed for in-room hotel delivery, with multi-floor elevator navigation, enclosed hygienic compartments, and password-protected individual compartment access for autonomous room-to-room delivery throughout a hotel building.
The 69-centimeter tall compartment (with layers removed or set to maximum height) accommodates IV bags, infusion equipment, large pharmaceutical packages, multi-item supply deliveries, and tall items that would not fit in the standard layer configurations.
Deployment Contexts: A Procurement Guide Hospital and Healthcare Facility Food Service The T3’s primary healthcare deployment context is hospital and healthcare facility food service: delivering patient meals from the central kitchen to ward delivery points or individual room delivery, where the enclosed cabin maintains food hygiene across the journey and the UV lamp disinfects the cabin between patients’ meal cycles.
Suitability depends on the exact configuration, compatible systems, intended professional use and manufacturer instructions.
Evaluate Keenon DINERBOT T3 Enclosed Delivery Robot for autonomous transport, line-side delivery, warehouse or facility workflows supported by its payload and navigation configuration.
Confirm fleet-management software, API/WMS/MES integration, maps, traffic control and charging strategy.
Match payload, lift/conveyor/rack modules and docking interfaces to the material-handling process.
Review floor condition, slopes, aisle width, safety zones, wireless coverage and commissioning requirements.
The table summarizes confirmed model and technical information confirmed from product specifications and technical documentation. Configuration-sensitive values should be checked against the exact supplied unit.
Use this checklist to reduce configuration, compatibility and acceptance problems.
Manufacturer and regulatory references are prioritized so buyers can verify identity, compatibility and configuration-sensitive information.
Technical or regulatory resource relevant to Keenon DINERBOT T3 Enclosed Delivery Robot evaluation.
Key questions for evaluating Keenon DINERBOT T3 Enclosed Delivery Robot before purchase.
Specifications Dimensions(WxDxH): 49.6 x 62.3 x 135.1cm (19.53″ x 24.53″ x 53.19″) Weight: 71kg (156lbs) Moving Speed: 0.1-1.0m/s(0.33-3.28ft/s) Battery Life*: Up to 12h Slope Angle: 5° Layer Size: 42.2 x 57.5cm (16.61″ x 22.64″) Total Load Capacity: 40kg (88lbs) Minimum Passage Width: 75cm (29.53″)
Exact robot model, revision and manufacturer part reference; Payload, reach, mobility, speed or working-envelope requirements relevant to the application; Battery, charging, runtime and power requirements where applicable.
No. Hardware revision, software, accessories, modules, handpieces, probes or other options can vary. The written quotation and exact-unit identification should define the supplied configuration.
Only items explicitly listed in the quotation and packing scope should be treated as included. Reference photographs can show accessories or system components that are not part of the final offer.
International B2B delivery can be arranged for approved destinations subject to product-specific transport requirements, customs rules and the agreed freight, insurance and delivery terms.
Manufacturer names and trademarks are used for product identification. Confirm model-specific instructions, compatibility and regional requirements before use.
Model, label/serial information, condition and supplied configuration can be confirmed before dispatch.
Quotation, packing scope, warranty terms and delivery responsibilities are documented before order approval.
Export packing, freight, insurance and shipment documentation can be coordinated for approved destinations.
Support is available for configuration questions, installation planning and procurement documentation.
Include delivery country, quantity, required configuration and target purchase date for a destination-specific offer.
Tell us what you need — we respond within one business day.
