Supermicro SYS-422GA-NBRT-LCC 4U GPU Server
$84,000.00
The Supermicro SYS-422GA-NBRT-LCC combines eight NVIDIA B200 SXM GPUs with dual Intel Xeon 6900 P-core sockets in 4U. Its 24 memory slots support qualified RDIMM or MRDIMM configurations. Supermicro requires complete liquid-cooled rack integration and onsite service; confirm the supplied BOM and rack scope.
Explore Related
Related products, categories and research.
SYS-422GA-NBRT-LCC: Xeon 6900 hosts and HGX B200 acceleration
The Supermicro SYS-422GA-NBRT-LCC is a liquid-cooled 4U system based on the X14DBG-DAP motherboard. Dual Intel Xeon 6900 processors with P-cores provide the host platform for eight NVIDIA B200 SXM GPUs. The GA designation identifies this LGA-7529 system and should remain distinct from the similarly named GS and earlier GE platforms.

Memory options for the host processors
The 24 host memory slots support qualified ECC DDR5 RDIMM configurations up to 6400MT/s, or MRDIMM configurations up to 8800MT/s, at one DIMM per channel. The published capacity ceiling is 6TB. These figures describe supported configurations rather than the memory population supplied with this listing.
Choose the processor and memory population together. The highest listed capacity and speed are not an assurance that any selected module combination reaches both. RDIMM and MRDIMM support should be checked against the relevant qualification list, rather than assuming the two module types are interchangeable in an existing configuration.
Eight accelerators and their interconnect
The HGX B200 assembly is specified with eight 180GB SXM devices connected through NVIDIA NVLink and NVSwitch. Their aggregate memory totals 1.44TB across the eight GPUs. A workload must still distribute its data and computation appropriately across those resources.
PCIe 5.0 x16 provides the documented CPU-to-GPU connection. Accelerator memory and host DDR5 are separate resources, so review the complete data path when sizing an application. The model description provides no measured training throughput or inference-latency guarantee.
Core platform specifications
| Processor sockets | Two Socket BR LGA-7529, Intel Xeon 6900 Series with P-cores |
|---|---|
| Processor ceiling | Up to 128 cores per supported CPU and 500W TDP with liquid cooling |
| Host memory | 24 DIMM positions; up to 6TB qualified ECC DDR5 |
| Front drive bays | Eight hot-swap 2.5-inch U.2 NVMe positions |
| Additional storage | Two M.2 NVMe positions |
| Onboard application network | Two RJ45 10GbE connections using Intel X710-AT2 |
| Remote management | Dedicated BMC/IPMI connection |
Drive-bay and socket counts identify platform positions. They do not confirm installed processors, SSD capacity or the available software stack. Ask for the offered component list before calculating usable storage or application memory capacity.
Expansion layout and backend NICs
The manual lists ten low-profile PCIe 5.0 x16 physical slots and two full-height, half-length x16 slots. It qualifies slot 1 as x8 bandwidth and identifies slots 2–9 for east-west backend networking adapters. Physical connector width alone therefore does not describe every slot’s usable bandwidth or intended role.
Review the slot map with the selected adapters. A backend fabric and the onboard RJ45 network serve different deployment needs. Confirm the installed NIC models, link speeds, transceivers and cables rather than treating the expansion capacity as an included networking package.
Complete liquid-cooled rack integration
Supermicro requires purchase with a complete liquid-cooled rack and onsite service. Direct-to-chip cold plates and five internal 60mm fans form part of the documented cooling design. The required rack scope must be established before planning facility connections.
Identify the cooling distribution interfaces, electrical feeds and access needed for maintenance. A 4U height does not make the system a standalone substitute for an air-cooled server. Integration work and service arrangements need to be explicit in the quotation.
Enclosure and power planning
The enclosure measures 449mm wide, 174mm high and 895.35mm deep. The datasheet lists a 92kg net weight. Assess actual assembled weight and handling needs, and leave room beyond the enclosure for cooling connections, power cables and service access.
Four 6600W Titanium power supplies provide a redundant 2+2 arrangement. Supply ratings describe available output under specified input conditions, not measured application consumption. Size the rack feeds and cooling plan against the integrated configuration and the facility’s electrical design.
Questions about this model
Can it use the Xeon 6700 processors listed for a GS variant?
No. This GA platform specifies Xeon 6900 P-core processors and LGA-7529 sockets. A neighboring system’s processor or memory layout cannot be substituted based on a similar name.
What should be confirmed before deployment?
Confirm CPU and DIMM selection, accelerator assembly, storage, adapters, rack cooling equipment, cables, rails and onsite service scope. Use the manufacturer system overview and compare AI infrastructure platforms against the same workload and facility requirements.
Recently viewed
Add AI Robot Supplier as a preferred source on Google.
