Eppendorf 5810R for professional procurement
The Eppendorf 5810R is a refrigerated multipurpose benchtop centrifuge designed for clinical, research and general laboratory workflows. Published documentation lists a broad 200–14,000 rpm speed range, maximum relative centrifugal force around 20,913 × g with compatible rotors and a temperature range down to approximately -9 °C. Rotor choice materially changes capacity, speed and RCF, so the exact rotor and buckets must be quoted with the centrifuge.
Evaluate the exact Eppendorf 5810R configuration
The Eppendorf 5810R is a refrigerated multipurpose benchtop centrifuge designed for clinical, research and general laboratory workflows. Published documentation lists a broad 200–14,000 rpm speed range, maximum relative centrifugal force around 20,913 × g with compatible rotors and a temperature range down to approximately -9 °C. Rotor choice materially changes capacity, speed and RCF, so the exact rotor and buckets must be quoted with the centrifuge.
This page is written for professional B2B buyers comparing an exact Eppendorf 5810R rather than a generic device category. A used or refurbished medical system can differ materially by production revision, installed options, handpieces or accessories, software, service history and local regulatory status. The commercial quotation should therefore describe the serial-number-specific unit and show current photographs of the equipment being supplied.
Three steps before purchase
Match model/serial labels, condition and included configuration to the written quotation.
Check accessories, software, power, facility and host-system requirements where applicable.
Confirm packing, freight, insurance, documentation, warranty and commissioning responsibilities.
Review the product and supplied configuration
Reference images support model identification. The final quotation should match the exact unit, accessories and condition being supplied.
Product capabilities and procurement-relevant details
Product-specific facts below are preserved from the researched listing; configuration-sensitive items should be verified against the exact supplied unit.
Refrigerated benchtop centrifuge
Refrigerated benchtop centrifuge
Wide rotor ecosystem for tubes, bottles and plates
Wide rotor ecosystem for tubes, bottles and plates
Programmable speed and run-time control
Programmable speed and run-time control
High-capacity swing-bucket options
High-capacity swing-bucket options
Temperature-controlled processing
Temperature-controlled processing
Where this product can fit
Suitability depends on the exact configuration, professional use case, manufacturer instructions and destination-market requirements.
General research and clinical laboratory centrifugation
Confirm suitability for the intended workflow before deployment.
Blood/sample preparation
Confirm suitability for the intended workflow before deployment.
Cell culture, molecular biology and plate/tube processing with compatible rotors
Confirm suitability for the intended workflow before deployment.
Product data for purchasing review
Exact specifications can vary by revision, region and installed options. The serial-number-specific configuration and manufacturer documentation take precedence.
- Published speed range
- Approximately 200–14,000 rpm; rotor dependent
- Published maximum RCF
- Up to approximately 20,913 × g; rotor dependent
- Temperature range
- Approximately -9 °C to +40 °C
- A-4-62 rotor example
- 4 × 250 mL; approximately 4,000 rpm / 3,220 × g
- Published dimensions
- Approximately 700 × 608 × 345 mm
- Configuration note
- Rotor, buckets, adapters and lids determine usable capacity
- Product entity
- Eppendorf 5810R
- Manufacturer / brand
- Eppendorf
- Manufacturer model
- 5810R
- Device type
- Laboratory
- A — Manufacturer/official
- Eppendorf official brochure/manual
- C — Secondary exact-model reference
- nist.gov
- Brand
- 5810R, Eppendorf
- SKU
- MED-5810R
Confirm the complete supplied configuration
The final commercial offer defines what is included. For high-value or configuration-sensitive equipment, request an itemized packing list before payment.
Quotation should confirm
- Identify every rotor, bucket, adapter and lid by part number and inspect for corrosion or damage.
- Request rotor age/history and follow Eppendorf life-cycle/inspection requirements.
- Test refrigeration, lid lock, imbalance detection, speed and temperature accuracy.
- Confirm mains voltage, service records and required biosafety/decontamination documentation.
Condition and compatibility
- Current photographs should match the supplied unit.
- Model, serial and part-number labels should be readable.
- Required accessories and host-system compatibility should be confirmed.
- Service, maintenance or functional-test information should be reviewed where applicable.
- Power, plug, facility and installation requirements should match the destination.
Exact package contents and condition are controlled by the written quotation and order documentation.
Review authoritative documentation before purchase
Use manufacturer, regulatory and technical references to validate product-family information. The exact supplied unit still requires serial-specific verification.
NIST – Eppendorf 5810R centrifuge
External technical reference for product verification and procurement review.
Eppendorf 5804/5810 series operating manual archive
External technical reference for product verification and procurement review.
Eppendorf official brochure/manual
External technical reference for product verification and procurement review.
Support from quotation to delivery
Site readiness
Review power, space, environment, network, consumable or facility requirements where applicable.
Inspection coordination
Confirm exact-unit photographs, identification labels, condition and functional evidence before dispatch.
Global logistics
Coordinate export packing, insured freight and shipment documentation for approved destinations.
Handover support
Plan installation, commissioning, training or local technical support where required and available.
Frequently asked questions
Answers distinguish product-family information from the serial-specific configuration that must be confirmed in the quotation.
Is the exact product supplied shown in the catalogue image guaranteed?
No. A catalogue image supports model identification. Before payment, request current photographs of the serial-number-specific unit and a packing list defining what is included.
What should a professional buyer verify before shipment?
Verify model/serial identity, configuration, accessories, functional test status, electrical requirements, software/options where relevant, service documentation, physical condition and the export/import requirements for the destination.
Can AI Robot Supplier arrange international B2B procurement?
International procurement and shipping can be discussed for eligible destinations. Final availability, regulatory eligibility, logistics and supplied configuration should be confirmed in the written quotation.
What this product is
The Eppendorf 5810R is a refrigerated multipurpose benchtop centrifuge designed for clinical, research and general laboratory workflows. Published documentation lists a broad 200–14,000 rpm speed range, maximum relative centrifugal force around 20,913 × g with compatible rotors and a temperature range down to approximately -9 °C. Rotor choice materially changes capacity, speed and RCF, so the exact rotor and buckets must be quoted with the centrifuge.
What should be confirmed before ordering Eppendorf 5810R?
Confirm the exact model and serial label, condition, included accessories, installed options or software where applicable, power requirements, documentation and the destination-country requirements shown in the written quotation.
Does every Eppendorf 5810R have the same configuration?
No. Configuration can vary by production revision, installed options, accessories and prior service history. The serial-number-specific quotation and packing list should take precedence over generic product-family information.
5810R product documentation
Review available manufacturer documentation, model labels, compatibility information and regional requirements before ordering. Manufacturer names and trademarks are used for product identification.
One procurement partner from quotation to delivery
Exact-model details, configuration and documentation are reviewed before commercial confirmation.
Freight options, export packing and shipment documentation for approved destinations.
Support for configuration checks, installation planning and procurement documentation.
Written quotation, packing scope, delivery terms and warranty conditions before order approval.
Request a destination-specific Eppendorf 5810R quote
Include delivery country, quantity, required configuration and target purchase date.
Eppendorf 5810R technical references and related resources
Review relevant technical references and AI Robot Supplier procurement resources before ordering.
Authoritative external references
- NIST – Eppendorf 5810R centrifuge
- Eppendorf 5804/5810 series operating manual archive
- Eppendorf official brochure/manual
- Eppendorf official brochure/manual
