Unitree G1 Third-Party Dexterity (One-Handed) (G1-DEX-RH-LH)
Unitree G1 Third-Party Dexterity (One-Handed) (G1-DEX-RH-LH) is a humanoid robot from UNITREE ROBOTICS. It is commonly presented as a five-finger, multi-joint end-effector designed to expand the G1’s manipulation capability beyond basic hands—supporting research, demonstrations, and development use cases where grasp variety and controlled gripping are important.
Unitree G1 Third-Party Dexterity (One-Handed) (G1-DEX-RH-LH) technical overview
Unitree G1 Third-Party Dexterity (One-Handed) (G1-DEX-RH-LH) is a humanoid robot from UNITREE ROBOTICS. It is commonly presented as a five-finger, multi-joint end-effector designed to expand the G1’s manipulation capability beyond basic hands—supporting research, demonstrations, and development use cases where grasp variety and controlled gripping are important.
Fine control with repeatability targets A published repeat positioning accuracy of ±0.20 mm suggests the hand is designed for repeatable motion—useful for demonstrations and research where consistent grasp outcomes matter.
For procurement, match the exact model or part number, included accessories, configuration and condition to the written quotation before installation or deployment.
Three checks before purchase
Match model, part number and serial or product-label details to the quotation.
Review system, accessory, software, power and facility requirements that apply to this product.
Confirm condition, included items, warranty, documentation and delivery terms before payment.
Unitree G1 Third-Party Dexterity (One-Handed) (G1-DEX-RH-LH) images
Use the product media and final exact-unit photographs to confirm configuration and condition before shipment.
Important Unitree G1 Third-Party Dexterity (One-Handed) (G1-DEX-RH-LH) details
The points below summarize model-specific information supported by manufacturer, regulatory or technical documentation.
It is commonly presented as a five-finger, multi-joint end-effector designed to expand
It is commonly presented as a five-finger, multi-joint end-effector designed to expand the G1’s manipulation capability beyond basic hands—supporting research, demonstrations, and development use cases where grasp variety and controlled gripping are important.
Fine control with repeatability targets A published repeat positioning accuracy of
Fine control with repeatability targets A published repeat positioning accuracy of ±0.20 mm suggests the hand is designed for repeatable motion—useful for demonstrations and research where consistent grasp outcomes matter.
Benefits include expanded grasp variety, published precision targets (e.g., ±0.20 mm
Benefits include expanded grasp variety, published precision targets (e.g., ±0.20 mm repeat positioning), and measurable grip force control suitable for manipulation research and realistic demonstrations.
It is a one-hand dexterous hand upgrade for the Unitree G1 humanoid robot, sold in
It is a one-hand dexterous hand upgrade for the Unitree G1 humanoid robot, sold in right-handed or left-handed versions to enable more human-like grasping and manipulation.
Applications and Use Cases Embodied AI and dexterous manipulation research The most
Applications and Use Cases Embodied AI and dexterous manipulation research The most common application for dexterous humanoid hands is research and development in manipulation.
Where Unitree G1 Third-Party Dexterity (One-Handed) (G1-DEX-RH-LH) can fit
Suitability depends on the exact configuration, compatible systems, intended professional use and manufacturer instructions.
Embodied AI and robotics research
Evaluate Unitree G1 Third-Party Dexterity (One-Handed) (G1-DEX-RH-LH) for embodied-AI, manipulation, locomotion or human-robot interaction workflows supported by the exact platform.
Software and model development
Confirm SDK/API, compute, simulation, teleoperation and supported AI frameworks before integration.
Manipulation and mobility
Match degrees of freedom, payload, reach, walking speed and end-effector capability to the intended tasks.
Lab or enterprise deployment
Confirm safety controls, charging, floor conditions, communications and commissioning requirements for the destination environment.
Unitree G1 Third-Party Dexterity (One-Handed) (G1-DEX-RH-LH) specifications and identification
The table summarizes confirmed model and technical information confirmed from product specifications and technical documentation. Configuration-sensitive values should be checked against the exact supplied unit.
- Product
- Unitree G1 Third-Party Dexterity (One-Handed) (G1-DEX-RH-LH)
- Manufacturer / brand
- UNITREE ROBOTICS
- Model / part reference
- Unitree G1 Third-Party Dexterity (One-Handed) (G1-DEX-RH-LH)
- Equipment type
- Humanoid Robot
- Origin
- China
What to verify before ordering Unitree G1 Third-Party Dexterity (One-Handed) (G1-DEX-RH-LH)
Use this checklist to reduce configuration, compatibility and acceptance problems.
- Exact robot model, revision and manufacturer part reference
- Payload, reach, mobility, speed or working-envelope requirements relevant to the application
- Battery, charging, runtime and power requirements where applicable
- Controller, SDK/API, network interfaces and software compatibility
- Sensors, end effectors, safety systems and included accessories
- Operating environment, floor/terrain, IP rating and commissioning requirements
Unitree G1 Third-Party Dexterity (One-Handed) (G1-DEX-RH-LH) manufacturer and technical resources
Manufacturer and regulatory references are prioritized so buyers can verify identity, compatibility and configuration-sensitive information.
UNITREE ROBOTICS official technical resource
Technical or regulatory resource relevant to Unitree G1 Third-Party Dexterity (One-Handed) (G1-DEX-RH-LH) evaluation.
UNITREE ROBOTICS official technical resource
Technical or regulatory resource relevant to Unitree G1 Third-Party Dexterity (One-Handed) (G1-DEX-RH-LH) evaluation.
Frequently asked questions
Key questions for evaluating Unitree G1 Third-Party Dexterity (One-Handed) (G1-DEX-RH-LH) before purchase.
What is Unitree G1 Third-Party Dexterity (One-Handed) (G1-DEX-RH-LH)?
It is commonly presented as a five-finger, multi-joint end-effector designed to expand the G1’s manipulation capability beyond basic hands—supporting research, demonstrations, and development use cases where grasp variety and controlled gripping are important.
What should be checked before ordering Unitree G1 Third-Party Dexterity (One-Handed) (G1-DEX-RH-LH)?
Exact robot model, revision and manufacturer part reference; Payload, reach, mobility, speed or working-envelope requirements relevant to the application; Battery, charging, runtime and power requirements where applicable.
Are all Unitree G1 Third-Party Dexterity (One-Handed) (G1-DEX-RH-LH) configurations identical?
No. Hardware revision, software, accessories, modules, handpieces, probes or other options can vary. The written quotation and exact-unit identification should define the supplied configuration.
What is included with Unitree G1 Third-Party Dexterity (One-Handed) (G1-DEX-RH-LH)?
Only items explicitly listed in the quotation and packing scope should be treated as included. Reference photographs can show accessories or system components that are not part of the final offer.
Can Unitree G1 Third-Party Dexterity (One-Handed) (G1-DEX-RH-LH) be shipped internationally?
International B2B delivery can be arranged for approved destinations subject to product-specific transport requirements, customs rules and the agreed freight, insurance and delivery terms.
UNITREE ROBOTICS documentation for Unitree G1 Third-Party Dexterity (One-Handed) (G1-DEX-RH-LH)
Manufacturer names and trademarks are used for product identification. Confirm model-specific instructions, compatibility and regional requirements before use.
Procurement support for Unitree G1 Third-Party Dexterity (One-Handed) (G1-DEX-RH-LH)
Model, label/serial information, condition and supplied configuration can be confirmed before dispatch.
Quotation, packing scope, warranty terms and delivery responsibilities are documented before order approval.
Export packing, freight, insurance and shipment documentation can be coordinated for approved destinations.
Support is available for configuration questions, installation planning and procurement documentation.
Request a quote for Unitree G1 Third-Party Dexterity (One-Handed) (G1-DEX-RH-LH)
Include delivery country, quantity, required configuration and target purchase date for a destination-specific offer.
