Unitree Go2 Standard Battery Charger (GO2-CHARGER)
Unitree Go2 Standard Battery Charger (GO2-CHARGER) is a Robot Accessory from UNITREE ROBOTICS. Summary The Unitree Go2 Standard Battery Charger (GO2-CHARGER) is the baseline official charging solution for Unitree Go2 batteries, defined by its 100–240V universal input, 34.0V / 3.5A / 119.0W output, and typical charge times of ~2 hours for the standard battery and ~4 hours for the long-endurance battery.
Unitree Go2 Standard Battery Charger (GO2-CHARGER) technical overview
Unitree Go2 Standard Battery Charger (GO2-CHARGER) is a Robot Accessory from UNITREE ROBOTICS. Summary The Unitree Go2 Standard Battery Charger (GO2-CHARGER) is the baseline official charging solution for Unitree Go2 batteries, defined by its 100–240V universal input, 34.0V / 3.5A / 119.0W output, and typical charge times of ~2 hours for the standard battery and ~4 hours for the long-endurance battery.
Supported battery types and charging times Unitree’s documentation lists two official Go2 battery packs and their approximate charging times using the standard charger: BT2-05 (Standard battery) — ~2 hours BT2-06 (Long-endurance battery) — ~4 hours These times are frequently used as real-world planning metrics for Go2 deployments—especially for training days, research experiments, and repeated demo sessions.
For procurement, match the exact model or part number, included accessories, configuration and condition to the written quotation before installation or deployment.
Three checks before purchase
Match model, part number and serial or product-label details to the quotation.
Review system, accessory, software, power and facility requirements that apply to this product.
Confirm condition, included items, warranty, documentation and delivery terms before payment.
Unitree Go2 Standard Battery Charger (GO2-CHARGER) images
Use the product media and final exact-unit photographs to confirm configuration and condition before shipment.
Important Unitree Go2 Standard Battery Charger (GO2-CHARGER) details
The points below summarize model-specific information supported by manufacturer, regulatory or technical documentation.
Summary The Unitree Go2 Standard Battery Charger (GO2-CHARGER) is the baseline official
Summary The Unitree Go2 Standard Battery Charger (GO2-CHARGER) is the baseline official charging solution for Unitree Go2 batteries, defined by its 100–240V universal input, 34.0V / 3.5A / 119.0W output, and typical charge times of ~2 hours for the standard battery and ~4 hours for the long-endurance battery.
Supported battery types and charging times Unitree’s documentation lists two official
Supported battery types and charging times Unitree’s documentation lists two official Go2 battery packs and their approximate charging times using the standard charger: BT2-05 (Standard battery) — ~2 hours BT2-06 (Long-endurance battery) — ~4 hours These times are frequently used as real-world planning metrics for Go2 deployments—especially for training days, research experiments, and repeated demo sessions.
The standard charger provides steady charging at 119W with a simple workflow and
The standard charger provides steady charging at 119W with a simple workflow and predictable charge times (about 2 hours for the standard Go2 battery), making it ideal for routine operation and backup charging.
Compact tabletop format Unitree’s manual provides a physical size specification for the
Compact tabletop format Unitree’s manual provides a physical size specification for the standard charger of: 210mm × 108mm × 48.2mm This form factor is typical for robotics battery chargers designed for desktop or bench use, balancing portability with adequate thermal headroom for steady charging.
In Unitree’s documentation, it is positioned as the default charging option for both
In Unitree’s documentation, it is positioned as the default charging option for both common Go2 battery variants: BT2-05 (Standard battery) BT2-06 (Long-endurance battery) This compatibility is important for users who operate mixed battery sets, especially in labs and training programs.
Where Unitree Go2 Standard Battery Charger (GO2-CHARGER) can fit
Suitability depends on the exact configuration, compatible systems, intended professional use and manufacturer instructions.
Robotics deployment
Evaluate Unitree Go2 Standard Battery Charger (GO2-CHARGER) for the documented robotics workflow supported by its exact hardware, payload and software configuration.
Software and systems integration
Confirm controller, SDK/API, network interfaces, sensors and supported third-party integrations.
Operational fit
Match payload, mobility, reach, runtime, environment and safety requirements to the intended task.
Commissioning and support
Confirm charging/power, accessories, training, spare parts and acceptance testing before deployment.
Unitree Go2 Standard Battery Charger (GO2-CHARGER) specifications and identification
The table summarizes confirmed model and technical information confirmed from product specifications and technical documentation. Configuration-sensitive values should be checked against the exact supplied unit.
- Product
- Unitree Go2 Standard Battery Charger (GO2-CHARGER)
- Manufacturer / brand
- UNITREE ROBOTICS
- Model / part reference
- Unitree Go2 Standard Battery Charger (GO2-CHARGER)
- Equipment type
- Robot Accessory
- Origin
- China
What to verify before ordering Unitree Go2 Standard Battery Charger (GO2-CHARGER)
Use this checklist to reduce configuration, compatibility and acceptance problems.
- Exact robot model, revision and manufacturer part reference
- Payload, reach, mobility, speed or working-envelope requirements relevant to the application
- Battery, charging, runtime and power requirements where applicable
- Controller, SDK/API, network interfaces and software compatibility
- Sensors, end effectors, safety systems and included accessories
- Operating environment, floor/terrain, IP rating and commissioning requirements
Unitree Go2 Standard Battery Charger (GO2-CHARGER) manufacturer and technical resources
Manufacturer and regulatory references are prioritized so buyers can verify identity, compatibility and configuration-sensitive information.
UNITREE ROBOTICS official technical resource
Technical or regulatory resource relevant to Unitree Go2 Standard Battery Charger (GO2-CHARGER) evaluation.
UNITREE ROBOTICS official technical resource
Technical or regulatory resource relevant to Unitree Go2 Standard Battery Charger (GO2-CHARGER) evaluation.
Frequently asked questions
Key questions for evaluating Unitree Go2 Standard Battery Charger (GO2-CHARGER) before purchase.
What is Unitree Go2 Standard Battery Charger (GO2-CHARGER)?
Summary The Unitree Go2 Standard Battery Charger (GO2-CHARGER) is the baseline official charging solution for Unitree Go2 batteries, defined by its 100–240V universal input, 34.0V / 3.5A / 119.0W output, and typical charge times of ~2 hours for the standard battery and ~4 hours for the long-endurance battery.
What should be checked before ordering Unitree Go2 Standard Battery Charger (GO2-CHARGER)?
Exact robot model, revision and manufacturer part reference; Payload, reach, mobility, speed or working-envelope requirements relevant to the application; Battery, charging, runtime and power requirements where applicable.
Are all Unitree Go2 Standard Battery Charger (GO2-CHARGER) configurations identical?
No. Hardware revision, software, accessories, modules, handpieces, probes or other options can vary. The written quotation and exact-unit identification should define the supplied configuration.
What is included with Unitree Go2 Standard Battery Charger (GO2-CHARGER)?
Only items explicitly listed in the quotation and packing scope should be treated as included. Reference photographs can show accessories or system components that are not part of the final offer.
Can Unitree Go2 Standard Battery Charger (GO2-CHARGER) be shipped internationally?
International B2B delivery can be arranged for approved destinations subject to product-specific transport requirements, customs rules and the agreed freight, insurance and delivery terms.
UNITREE ROBOTICS documentation for Unitree Go2 Standard Battery Charger (GO2-CHARGER)
Manufacturer names and trademarks are used for product identification. Confirm model-specific instructions, compatibility and regional requirements before use.
Procurement support for Unitree Go2 Standard Battery Charger (GO2-CHARGER)
Model, label/serial information, condition and supplied configuration can be confirmed before dispatch.
Quotation, packing scope, warranty terms and delivery responsibilities are documented before order approval.
Export packing, freight, insurance and shipment documentation can be coordinated for approved destinations.
Support is available for configuration questions, installation planning and procurement documentation.
Request a quote for Unitree Go2 Standard Battery Charger (GO2-CHARGER)
Include delivery country, quantity, required configuration and target purchase date for a destination-specific offer.
