Keenon DINERBOT T8
Keenon DINERBOT T8 is an autonomous mobile robot from KEENON. Multi-Sensor SLAM Navigation The T8’s navigation fuses data from LiDAR, encoders, gyroscopes (IMU), image modules, UWB, and lidarodom into a unified SLAM positioning system.
Keenon DINERBOT T8 technical overview
Keenon DINERBOT T8 is an autonomous mobile robot from KEENON. Multi-Sensor SLAM Navigation The T8’s navigation fuses data from LiDAR, encoders, gyroscopes (IMU), image modules, UWB, and lidarodom into a unified SLAM positioning system.
Moving Speed: 1.0m/s (3.28ft/s) Battery Life*: Up to 15h Charging Time**: 4h Slope Angle: 5° Total Load Capacity: 20 kg (44 lbs) Minimum Passage Width: 55 cm (21.65″)
For procurement, match the exact model or part number, included accessories, configuration and condition to the written quotation before installation or deployment.
Three checks before purchase
Match model, part number and serial or product-label details to the quotation.
Review system, accessory, software, power and facility requirements that apply to this product.
Confirm condition, included items, warranty, documentation and delivery terms before payment.
Keenon DINERBOT T8 images
Use the product media and final exact-unit photographs to confirm configuration and condition before shipment.
Important Keenon DINERBOT T8 details
The points below summarize model-specific information supported by manufacturer, regulatory or technical documentation.
Multi-Sensor SLAM Navigation The T8’s navigation fuses data from LiDAR, encoders
Multi-Sensor SLAM Navigation The T8’s navigation fuses data from LiDAR, encoders, gyroscopes (IMU), image modules, UWB, and lidarodom into a unified SLAM positioning system.
Moving Speed: 1.0m/s (3.28ft/s) Battery Life*: Up to 15h Charging Time**: 4h Slope
Moving Speed: 1.0m/s (3.28ft/s) Battery Life*: Up to 15h Charging Time**: 4h Slope Angle: 5° Total Load Capacity: 20 kg (44 lbs) Minimum Passage Width: 55 cm (21.65″)
The “2+1” designation refers to two forward stereo cameras providing depth perception
The “2+1” designation refers to two forward stereo cameras providing depth perception in the primary travel direction plus one additional sensor covering an offset zone, together achieving 204 degrees of continuous 3D coverage.
15-hour battery for coverage from breakfast through late service: The full-day
15-hour battery for coverage from breakfast through late service: The full-day endurance eliminates the recharging interruption that would otherwise require manual staff involvement.
The T11 navigates to 49 centimeters (versus the T8’s 55 cm) and adds a 18.5-inch
The T11 navigates to 49 centimeters (versus the T8’s 55 cm) and adds a 18.5-inch advertising screen and five-sensor VSLAM navigation.
Where Keenon DINERBOT T8 can fit
Suitability depends on the exact configuration, compatible systems, intended professional use and manufacturer instructions.
Material movement and intralogistics
Evaluate Keenon DINERBOT T8 for autonomous transport, line-side delivery, warehouse or facility workflows supported by its payload and navigation configuration.
Fleet and software integration
Confirm fleet-management software, API/WMS/MES integration, maps, traffic control and charging strategy.
Payload and top-module fit
Match payload, lift/conveyor/rack modules and docking interfaces to the material-handling process.
Site readiness
Review floor condition, slopes, aisle width, safety zones, wireless coverage and commissioning requirements.
Keenon DINERBOT T8 specifications and identification
The table summarizes confirmed model and technical information confirmed from product specifications and technical documentation. Configuration-sensitive values should be checked against the exact supplied unit.
- Product
- Keenon DINERBOT T8
- Manufacturer / brand
- KEENON
- Model / part reference
- T8
- Equipment type
- Autonomous Mobile Robot
- Origin
- China
What to verify before ordering Keenon DINERBOT T8
Use this checklist to reduce configuration, compatibility and acceptance problems.
- Exact robot model, revision and manufacturer part reference
- Payload, reach, mobility, speed or working-envelope requirements relevant to the application
- Battery, charging, runtime and power requirements where applicable
- Controller, SDK/API, network interfaces and software compatibility
- Sensors, end effectors, safety systems and included accessories
- Operating environment, floor/terrain, IP rating and commissioning requirements
Keenon DINERBOT T8 manufacturer and technical resources
Manufacturer and regulatory references are prioritized so buyers can verify identity, compatibility and configuration-sensitive information.
KEENON official technical resource
Technical or regulatory resource relevant to Keenon DINERBOT T8 evaluation.
Frequently asked questions
Key questions for evaluating Keenon DINERBOT T8 before purchase.
What is Keenon DINERBOT T8?
Multi-Sensor SLAM Navigation The T8’s navigation fuses data from LiDAR, encoders, gyroscopes (IMU), image modules, UWB, and lidarodom into a unified SLAM positioning system.
What should be checked before ordering Keenon DINERBOT T8?
Exact robot model, revision and manufacturer part reference; Payload, reach, mobility, speed or working-envelope requirements relevant to the application; Battery, charging, runtime and power requirements where applicable.
Are all Keenon DINERBOT T8 configurations identical?
No. Hardware revision, software, accessories, modules, handpieces, probes or other options can vary. The written quotation and exact-unit identification should define the supplied configuration.
What is included with Keenon DINERBOT T8?
Only items explicitly listed in the quotation and packing scope should be treated as included. Reference photographs can show accessories or system components that are not part of the final offer.
Can Keenon DINERBOT T8 be shipped internationally?
International B2B delivery can be arranged for approved destinations subject to product-specific transport requirements, customs rules and the agreed freight, insurance and delivery terms.
KEENON documentation for Keenon DINERBOT T8
Manufacturer names and trademarks are used for product identification. Confirm model-specific instructions, compatibility and regional requirements before use.
Procurement support for Keenon DINERBOT T8
Model, label/serial information, condition and supplied configuration can be confirmed before dispatch.
Quotation, packing scope, warranty terms and delivery responsibilities are documented before order approval.
Export packing, freight, insurance and shipment documentation can be coordinated for approved destinations.
Support is available for configuration questions, installation planning and procurement documentation.
Request a quote for Keenon DINERBOT T8
Include delivery country, quantity, required configuration and target purchase date for a destination-specific offer.
