WISPR Inertial Labs RESEPI Livox Avia 24MP Camera (FPV Gimbal)
WISPR Inertial Labs RESEPI Livox Avia 24MP Camera (FPV Gimbal) is a Drone Camera / Payload from WISPR. Range accuracy: ±2 cm
WISPR Inertial Labs RESEPI Livox Avia 24MP Camera (FPV Gimbal) technical overview
WISPR Inertial Labs RESEPI Livox Avia 24MP Camera (FPV Gimbal) is a Drone Camera / Payload from WISPR. Range accuracy: ±2 cm
Position accuracy: 1 cm + 1 ppm (RTK), 0.5 cm (PPK)
Before purchase, confirm the exact model or part number, configuration, compatible accessories and included scope against the written quotation and manufacturer documentation.
Three checks before purchase
Match the manufacturer model, part number and product-label details to the quotation.
Review system, accessory, software, power and installation requirements that apply to this product.
Confirm included items, condition, warranty, documentation and delivery terms before payment.
WISPR Inertial Labs RESEPI Livox Avia 24MP Camera (FPV Gimbal) images
Use the product media and exact-unit photographs supplied with the quotation to confirm model, configuration and condition.
Important WISPR Inertial Labs RESEPI Livox Avia 24MP Camera (FPV Gimbal) details
These points summarize model-specific technical information available for product evaluation.
Range accuracy: ±2 cm
Range accuracy: ±2 cm
Position accuracy: 1 cm + 1 ppm (RTK), 0.5 cm (PPK)
Position accuracy: 1 cm + 1 ppm (RTK), 0.5 cm (PPK)
RTK and PPK modes: position accuracy of 1 cm + 1 ppm RTK and 0.5 cm PPK supported
RTK and PPK modes: position accuracy of 1 cm + 1 ppm RTK and 0.5 cm PPK supported.
At under 1 kg without camera, it is the lightest RESEPI configuration available
At under 1 kg without camera, it is the lightest RESEPI configuration available, designed to extend flight time and maximize point cloud density on platforms with tighter payload capacity requirements.
At its core, the RESEPI AVIA integrates the Livox AVIA LiDAR with an Inertial Labs
At its core, the RESEPI AVIA integrates the Livox AVIA LiDAR with an Inertial Labs tactical-grade IMU-P and a high-accuracy single or dual-antenna GNSS receiver supporting GPS, GLONASS, Galileo, BeiDou, QZSS, NavIC, SBAS, and L-Band on L1, L2, and L5 frequencies.
Where WISPR Inertial Labs RESEPI Livox Avia 24MP Camera (FPV Gimbal) can fit
Suitability depends on the exact configuration, compatible systems, intended professional use and manufacturer instructions.
UAS payload integration
Evaluate WISPR Inertial Labs RESEPI Livox Avia 24MP Camera (FPV Gimbal) for compatible aircraft and mission workflows supported by its exact interface, power and payload requirements.
Inspection and data capture
Match camera, thermal, LiDAR, spotlight, speaker or sensor capability to the intended workflow.
Platform compatibility
Confirm supported aircraft, gimbal/port interface, firmware, controller and application requirements.
Mission readiness
Verify mounting hardware, cables, storage media, environmental rating and included accessories.
WISPR Inertial Labs RESEPI Livox Avia 24MP Camera (FPV Gimbal) specifications and identification
The table summarizes confirmed model and technical information from product specifications and available technical documentation. Configuration-sensitive values should be checked against the exact supplied unit.
- Product
- WISPR Inertial Labs RESEPI Livox Avia 24MP Camera (FPV Gimbal)
- Manufacturer / brand
- WISPR
- Model / part reference
- FPV Gimbal
- Equipment type
- Drone Camera / Payload
- RESEPI Livox AVIA 24MP Camera With FPV Gimbal
- Lightweight LiDAR Scanning and Mapping Payload With Real-Time Flight Visibility for the WISPR SkyScout Series
- FPV camera integration
- SkyScout SnapFit adapter delivers real-time controller visibility in flight.
- Lightweight configuration
- under 1 kg without camera for extended SkyScout flight operations.
- Long laser range
- 190m at 10% reflectivity and 320m at 80% reflectivity across all channels.
- Vertical accuracy
- 3 to 5 cm system accuracy, tightening to 2 to 3 cm with noise removal.
- RTK and PPK modes
- position accuracy of 1 cm + 1 ppm RTK and 0.5 cm PPK supported.
- 24MP RGB camera
- Sony E-Mount 16mm lens at 70° FOV captures simultaneous color imagery.
- Multi-constellation GNSS
- supports GPS, GLONASS, Galileo, BeiDou, QZSS, NavIC, and SBAS.
- System vertical accuracy
- 3–5 cm
- Precision (1σ noise removal)
- 2–3 cm
- Weight
- 1.2 kg (with camera), 0.9 kg (without camera)
- Dimensions
- 20 × 13 × 9.2 cm
- Max flight time (DJI M300)
- 33 minutes
- Operating voltage
- 9–45 V
What to verify before ordering WISPR Inertial Labs RESEPI Livox Avia 24MP Camera (FPV Gimbal)
Use this checklist to reduce model, configuration and integration mismatches.
- Exact payload/accessory model and manufacturer part number
- Supported aircraft and gimbal/port or electrical interface
- Firmware, controller and application compatibility
- Power, weight, mounting and payload-capacity limits
- Environmental rating and mission-specific operating limits
- Included cables, brackets, storage media and other accessories
WISPR Inertial Labs RESEPI Livox Avia 24MP Camera (FPV Gimbal) manufacturer and technical resources
Manufacturer, regulator and other authoritative references are prioritized for product verification.
WISPR official technical resource
Reference material relevant to WISPR Inertial Labs RESEPI Livox Avia 24MP Camera (FPV Gimbal) identity, specifications, compatibility or deployment.
Frequently asked questions
Key questions for evaluating WISPR Inertial Labs RESEPI Livox Avia 24MP Camera (FPV Gimbal) before purchase.
What is WISPR Inertial Labs RESEPI Livox Avia 24MP Camera (FPV Gimbal)?
Range accuracy: ±2 cm
What should be checked before ordering WISPR Inertial Labs RESEPI Livox Avia 24MP Camera (FPV Gimbal)?
Exact payload/accessory model and manufacturer part number; Supported aircraft and gimbal/port or electrical interface; Firmware, controller and application compatibility.
Are all WISPR Inertial Labs RESEPI Livox Avia 24MP Camera (FPV Gimbal) configurations identical?
No. Hardware revision, software, accessories, modules, handpieces, probes or other options can vary. The written quotation and exact-unit identification should define the supplied configuration.
What is included with WISPR Inertial Labs RESEPI Livox Avia 24MP Camera (FPV Gimbal)?
Only items explicitly listed in the quotation and packing scope should be treated as included. Reference photographs can show accessories or system components that are not part of the final offer.
Can WISPR Inertial Labs RESEPI Livox Avia 24MP Camera (FPV Gimbal) be shipped internationally?
International B2B delivery can be arranged for approved destinations subject to product-specific transport requirements, customs rules and the agreed freight, insurance and delivery terms.
WISPR documentation for WISPR Inertial Labs RESEPI Livox Avia 24MP Camera (FPV Gimbal)
Manufacturer names and trademarks are used for product identification. Confirm model-specific instructions, compatibility and regional requirements before deployment.
Procurement support for WISPR Inertial Labs RESEPI Livox Avia 24MP Camera (FPV Gimbal)
Model, part number, condition and supplied configuration can be confirmed before dispatch.
Quotation, packing scope, warranty terms and delivery responsibilities are documented before order approval.
Export packing, freight, insurance and shipment documentation can be coordinated for approved destinations.
Support is available for compatibility questions, installation planning and procurement documentation.
Request a quote for WISPR Inertial Labs RESEPI Livox Avia 24MP Camera (FPV Gimbal)
Include delivery country, quantity, required configuration and target purchase date for a destination-specific offer.
