$8,397
Keenon BUTLERBOT W3 Private and Multi-Floor Service Robot is an autonomous mobile robot from KEENON. Key specifications: 45.9 × 54.9 × 108.1 cm body, 48 kg weight, 20 kg total load capacity across configurable compartments, 0.1 to 0.8 m/s cruise speed (up to 1 m/s maximum), 9-to-12 hour battery life, 11.6-inch 1080p touchscreen, Laser + Visual SLAM.
Review the verified model information, technical details, compatibility, included configuration and documentation before requesting a destination-specific B2B quotation.
Related products, categories and research.
Keenon BUTLERBOT W3 Private and Multi-Floor Service Robot is an autonomous mobile robot from KEENON. Key specifications: 45.9 × 54.9 × 108.1 cm body, 48 kg weight, 20 kg total load capacity across configurable compartments, 0.1 to 0.8 m/s cruise speed (up to 1 m/s maximum), 9-to-12 hour battery life, 11.6-inch 1080p touchscreen, Laser + Visual SLAM navigation, automatic elevator control, and two-, three-, or four-compartment configuration options with.
Keenon BUTLERBOT W3 Private and Multi-Floor Service Robot is an autonomous mobile robot from KEENON. Key specifications: 45.9 × 54.9 × 108.1 cm body, 48 kg weight, 20 kg total load capacity across configurable compartments, 0.1 to 0.8 m/s cruise speed (up to 1 m/s maximum), 9-to-12 hour battery life, 11.6-inch 1080p touchscreen, Laser + Visual SLAM navigation, automatic elevator control, and two-, three-, or four-compartment configuration options with.
Moving Speed: 0.8m/s (2.63ft/s) Battery Life*: Up to 12h Charging Time**: 6.5h Slope Angle: 7° Total Load Capacity: 20kg (44lbs) Minimum Passage Width: 70cm (27.56″)
For procurement, match the exact model or part number, included accessories, configuration and condition to the written quotation before installation or deployment.
Match model, part number and serial or product-label details to the quotation.
Review system, accessory, software, power and facility requirements that apply to this product.
Confirm condition, included items, warranty, documentation and delivery terms before payment.
Use the product media and final exact-unit photographs to confirm configuration and condition before shipment.
The points below summarize model-specific information supported by manufacturer, regulatory or technical documentation.
Key specifications: 45.9 × 54.9 × 108.1 cm body, 48 kg weight, 20 kg total load capacity across configurable compartments, 0.1 to 0.8 m/s cruise speed (up to 1 m/s maximum), 9-to-12 hour battery life, 11.6-inch 1080p touchscreen, Laser + Visual SLAM navigation, automatic elevator control, and two-, three-, or four-compartment configuration options with individually lockable automatic doors.
Moving Speed: 0.8m/s (2.63ft/s) Battery Life*: Up to 12h Charging Time**: 6.5h Slope Angle: 7° Total Load Capacity: 20kg (44lbs) Minimum Passage Width: 70cm (27.56″)
Obstacle Avoidance: 120-Degree Wide-Angle Dual Stereo Vision The 120-degree wide-angle dual stereo vision camera system provides the obstacle detection coverage needed for hotel corridor navigation, where other guests, housekeeping carts, luggage trolleys, and service equipment regularly create dynamic obstacles between the kitchen and guest floors.
The W3’s 9-to-12 hour battery endurance covers a complete overnight service period without requiring recharging, and its autonomous operation has no shift cost premium at any hour, making it economically equivalent for a 2 AM delivery as a 2 PM delivery.
Design and Physical Characteristics Dimensions and Physical Profile The BUTLERBOT W3’s dimensions are confirmed across multiple distributor specifications as 45.9 by 54.9 by 108.1 centimeters (18.07 by 21.61 by 42.56 inches, approximately), with a total weight of 48 kilograms (106 pounds) including battery.
Suitability depends on the exact configuration, compatible systems, intended professional use and manufacturer instructions.
Evaluate Keenon BUTLERBOT W3 Private and Multi-Floor Service Robot for autonomous transport, line-side delivery, warehouse or facility workflows supported by its payload and navigation configuration.
Confirm fleet-management software, API/WMS/MES integration, maps, traffic control and charging strategy.
Match payload, lift/conveyor/rack modules and docking interfaces to the material-handling process.
Review floor condition, slopes, aisle width, safety zones, wireless coverage and commissioning requirements.
The table summarizes confirmed model and technical information confirmed from product specifications and technical documentation. Configuration-sensitive values should be checked against the exact supplied unit.
Use this checklist to reduce configuration, compatibility and acceptance problems.
Manufacturer and regulatory references are prioritized so buyers can verify identity, compatibility and configuration-sensitive information.
Technical or regulatory resource relevant to Keenon BUTLERBOT W3 Private and Multi-Floor Service Robot evaluation.
Key questions for evaluating Keenon BUTLERBOT W3 Private and Multi-Floor Service Robot before purchase.
Key specifications: 45.9 × 54.9 × 108.1 cm body, 48 kg weight, 20 kg total load capacity across configurable compartments, 0.1 to 0.8 m/s cruise speed (up to 1 m/s maximum), 9-to-12 hour battery life, 11.6-inch 1080p touchscreen, Laser + Visual SLAM navigation, automatic elevator control, and two-, three-, or.
Exact robot model, revision and manufacturer part reference; Payload, reach, mobility, speed or working-envelope requirements relevant to the application; Battery, charging, runtime and power requirements where applicable.
No. Hardware revision, software, accessories, modules, handpieces, probes or other options can vary. The written quotation and exact-unit identification should define the supplied configuration.
Only items explicitly listed in the quotation and packing scope should be treated as included. Reference photographs can show accessories or system components that are not part of the final offer.
International B2B delivery can be arranged for approved destinations subject to product-specific transport requirements, customs rules and the agreed freight, insurance and delivery terms.
Manufacturer names and trademarks are used for product identification. Confirm model-specific instructions, compatibility and regional requirements before use.
Model, label/serial information, condition and supplied configuration can be confirmed before dispatch.
Quotation, packing scope, warranty terms and delivery responsibilities are documented before order approval.
Export packing, freight, insurance and shipment documentation can be coordinated for approved destinations.
Support is available for configuration questions, installation planning and procurement documentation.
Include delivery country, quantity, required configuration and target purchase date for a destination-specific offer.
Tell us what you need — we respond within one business day.
