$7,797
KEENON S100 Heavy-Load Courier Robot is an autonomous mobile robot from KEENON. Key specifications: dimensions 92.5 × 62.0 × 128.2 cm (36.42″ × 24.41″ × 50.47″), 87.5 kg robot weight, 100+ kg payload capacity (up to 120 kg), 1 m/s maximum speed, 8-hour battery life per charge, 2.5-hour full recharge, 15-second hot-swap battery, LiDAR +.
Review the verified model information, technical details, compatibility, included configuration and documentation before requesting a destination-specific B2B quotation.
Related products, categories and research.
KEENON S100 Heavy-Load Courier Robot is an autonomous mobile robot from KEENON. Key specifications: dimensions 92.5 × 62.0 × 128.2 cm (36.42″ × 24.41″ × 50.47″), 87.5 kg robot weight, 100+ kg payload capacity (up to 120 kg), 1 m/s maximum speed, 8-hour battery life per charge, 2.5-hour full recharge, 15-second hot-swap battery, LiDAR + stereo vision + imaging sensor navigation, 360° obstacle avoidance, three emergency stop buttons, and.
KEENON S100 Heavy-Load Courier Robot is an autonomous mobile robot from KEENON. Key specifications: dimensions 92.5 × 62.0 × 128.2 cm (36.42″ × 24.41″ × 50.47″), 87.5 kg robot weight, 100+ kg payload capacity (up to 120 kg), 1 m/s maximum speed, 8-hour battery life per charge, 2.5-hour full recharge, 15-second hot-swap battery, LiDAR + stereo vision + imaging sensor navigation, 360° obstacle avoidance, three emergency stop buttons, and.
The 15-second battery swap capability is particularly valuable in hospital settings, where transport operations are continuous across 24 hours and cannot accommodate the 2.5-hour recharge cycle that interrupts coverage in other operational models.
For procurement, match the exact model or part number, included accessories, configuration and condition to the written quotation before installation or deployment.
Match model, part number and serial or product-label details to the quotation.
Review system, accessory, software, power and facility requirements that apply to this product.
Confirm condition, included items, warranty, documentation and delivery terms before payment.
Use the product media and final exact-unit photographs to confirm configuration and condition before shipment.
The points below summarize model-specific information supported by manufacturer, regulatory or technical documentation.
Key specifications: dimensions 92.5 × 62.0 × 128.2 cm (36.42″ × 24.41″ × 50.47″), 87.5 kg robot weight, 100+ kg payload capacity (up to 120 kg), 1 m/s maximum speed, 8-hour battery life per charge, 2.5-hour full recharge, 15-second hot-swap battery, LiDAR + stereo vision + imaging sensor navigation, 360° obstacle avoidance, three emergency stop buttons, and same-day plug-and-play deployment.
The 15-second battery swap capability is particularly valuable in hospital settings, where transport operations are continuous across 24 hours and cannot accommodate the 2.5-hour recharge cycle that interrupts coverage in other operational models.
Moving Speed: 1m/s (3.28ft/s) Battery Life*: Up to 8h Charging Time**: 2.5h Standard Shelf Size: 86.5 x 60.0 x 80.0cm (34.06″ x 23.62″ x 31.50″) Weight: 87.5kg (192.9lbs) Minimum Passage Width: 90cm (29.53″) – without rotation
TOD System and IPROS both confirm the three-mode charging system, and Useabot’s documentation states it explicitly: “three charging options, charging pile, adapter, and a quick-swap battery that takes just 15 seconds, you can ensure around-the-clock delivery.” Charging pile (dedicated charging station): The primary charging mode for facilities with a fixed robot parking and charging area.
A hospital deploying two or three S100 units with two batteries each maintains continuous transport capacity across all hours of operation, with batteries swapped at nursing station handover or during natural transport lulls.
Suitability depends on the exact configuration, compatible systems, intended professional use and manufacturer instructions.
Evaluate KEENON S100 Heavy-Load Courier Robot for autonomous transport, line-side delivery, warehouse or facility workflows supported by its payload and navigation configuration.
Confirm fleet-management software, API/WMS/MES integration, maps, traffic control and charging strategy.
Match payload, lift/conveyor/rack modules and docking interfaces to the material-handling process.
Review floor condition, slopes, aisle width, safety zones, wireless coverage and commissioning requirements.
The table summarizes confirmed model and technical information confirmed from product specifications and technical documentation. Configuration-sensitive values should be checked against the exact supplied unit.
Use this checklist to reduce configuration, compatibility and acceptance problems.
Manufacturer and regulatory references are prioritized so buyers can verify identity, compatibility and configuration-sensitive information.
Technical or regulatory resource relevant to KEENON S100 Heavy-Load Courier Robot evaluation.
Key questions for evaluating KEENON S100 Heavy-Load Courier Robot before purchase.
Key specifications: dimensions 92.5 × 62.0 × 128.2 cm (36.42″ × 24.41″ × 50.47″), 87.5 kg robot weight, 100+ kg payload capacity (up to 120 kg), 1 m/s maximum speed, 8-hour battery life per charge, 2.5-hour full recharge, 15-second hot-swap battery, LiDAR + stereo vision + imaging sensor navigation, 360° obstacle.
Exact robot model, revision and manufacturer part reference; Payload, reach, mobility, speed or working-envelope requirements relevant to the application; Battery, charging, runtime and power requirements where applicable.
No. Hardware revision, software, accessories, modules, handpieces, probes or other options can vary. The written quotation and exact-unit identification should define the supplied configuration.
Only items explicitly listed in the quotation and packing scope should be treated as included. Reference photographs can show accessories or system components that are not part of the final offer.
International B2B delivery can be arranged for approved destinations subject to product-specific transport requirements, customs rules and the agreed freight, insurance and delivery terms.
Manufacturer names and trademarks are used for product identification. Confirm model-specific instructions, compatibility and regional requirements before use.
Model, label/serial information, condition and supplied configuration can be confirmed before dispatch.
Quotation, packing scope, warranty terms and delivery responsibilities are documented before order approval.
Export packing, freight, insurance and shipment documentation can be coordinated for approved destinations.
Support is available for configuration questions, installation planning and procurement documentation.
Include delivery country, quantity, required configuration and target purchase date for a destination-specific offer.
Tell us what you need — we respond within one business day.
