KLEENBOT C55
KLEENBOT C55 is an autonomous mobile robot from KEENON. Key specifications: dimensions 860×850×1,082 mm (including squeegee), weight 150 kg, 55 cm cleaning width, 60-liter clean water tank, 47-liter wastewater tank, 21,000 Pa suction, 30-second post-scrub floor drying, triple-roller dry-wet separation design, 11.6-inch interactive screen, and 4-hour charge time.
KLEENBOT C55 technical overview
KLEENBOT C55 is an autonomous mobile robot from KEENON. Key specifications: dimensions 860×850×1,082 mm (including squeegee), weight 150 kg, 55 cm cleaning width, 60-liter clean water tank, 47-liter wastewater tank, 21,000 Pa suction, 30-second post-scrub floor drying, triple-roller dry-wet separation design, 11.6-inch interactive screen, and 4-hour charge time.
Terminal floor areas of 10,000 to 50,000 square meters require scrubbing across multiple operational hours, and the 60-liter water tank enables extended uninterrupted cleaning runs that reduce the management overhead of the cleaning operation.
For procurement, match the exact model or part number, included accessories, configuration and condition to the written quotation before installation or deployment.
Three checks before purchase
Match model, part number and serial or product-label details to the quotation.
Review system, accessory, software, power and facility requirements that apply to this product.
Confirm condition, included items, warranty, documentation and delivery terms before payment.
KLEENBOT C55 images
Use the product media and final exact-unit photographs to confirm configuration and condition before shipment.
Important KLEENBOT C55 details
The points below summarize model-specific information supported by manufacturer, regulatory or technical documentation.
Key specifications: dimensions 860×850×1,082 mm (including squeegee), weight 150 kg, 55
Key specifications: dimensions 860×850×1,082 mm (including squeegee), weight 150 kg, 55 cm cleaning width, 60-liter clean water tank, 47-liter wastewater tank, 21,000 Pa suction, 30-second post-scrub floor drying, triple-roller dry-wet separation design, 11.6-inch interactive screen, and 4-hour charge time.
Terminal floor areas of 10,000 to 50,000 square meters require scrubbing across
Terminal floor areas of 10,000 to 50,000 square meters require scrubbing across multiple operational hours, and the 60-liter water tank enables extended uninterrupted cleaning runs that reduce the management overhead of the cleaning operation.
KEENON KLEENBOT C55: The Professional Medium-to-Large Area Autonomous Scrubbing Robot
KEENON KLEENBOT C55: The Professional Medium-to-Large Area Autonomous Scrubbing Robot KEENON’s ISSA North America Expo press release specifies the C55’s three core innovations: “Enhanced Cleanliness: Its triple-roller dry-wet separation design ensures scrubbing with clean water to prevent cross-contamination.
Combined with 21,000 Pa powerful suction, the robot leaves floors dry in 30 seconds
Combined with 21,000 Pa powerful suction, the robot leaves floors dry in 30 seconds without any streaks.” The 30-second floor drying time directly addresses the primary safety concern associated with wet floor scrubbing in high-traffic commercial facilities: the slip hazard created when floors remain wet after cleaning.KEENON confirmed its global market leadership at the ISSA event: “KEENON Robotics continues to secure the No.
The C55’s position at the top of this hierarchy reflects its design for the commercial
The C55’s position at the top of this hierarchy reflects its design for the commercial scale that the smaller KLEENBOT platforms cannot serve in a single session: airports, hospitals, shopping centers, large hotels, and distribution warehouse facilities where the floor area requiring daily or periodic scrubbing exceeds what any 16-liter tank system can cover without multiple refill stops.
Where KLEENBOT C55 can fit
Suitability depends on the exact configuration, compatible systems, intended professional use and manufacturer instructions.
Material movement and intralogistics
Evaluate KLEENBOT C55 for autonomous transport, line-side delivery, warehouse or facility workflows supported by its payload and navigation configuration.
Fleet and software integration
Confirm fleet-management software, API/WMS/MES integration, maps, traffic control and charging strategy.
Payload and top-module fit
Match payload, lift/conveyor/rack modules and docking interfaces to the material-handling process.
Site readiness
Review floor condition, slopes, aisle width, safety zones, wireless coverage and commissioning requirements.
KLEENBOT C55 specifications and identification
The table summarizes confirmed model and technical information confirmed from product specifications and technical documentation. Configuration-sensitive values should be checked against the exact supplied unit.
- Product
- KLEENBOT C55
- Manufacturer / brand
- KEENON
- Model / part reference
- KLEENBOT C55
- Equipment type
- Autonomous Mobile Robot
- Origin
- China
What to verify before ordering KLEENBOT C55
Use this checklist to reduce configuration, compatibility and acceptance problems.
- Exact robot model, revision and manufacturer part reference
- Payload, reach, mobility, speed or working-envelope requirements relevant to the application
- Battery, charging, runtime and power requirements where applicable
- Controller, SDK/API, network interfaces and software compatibility
- Sensors, end effectors, safety systems and included accessories
- Operating environment, floor/terrain, IP rating and commissioning requirements
KLEENBOT C55 manufacturer and technical resources
Manufacturer and regulatory references are prioritized so buyers can verify identity, compatibility and configuration-sensitive information.
KEENON official technical resource
Technical or regulatory resource relevant to KLEENBOT C55 evaluation.
Frequently asked questions
Key questions for evaluating KLEENBOT C55 before purchase.
What is KLEENBOT C55?
Key specifications: dimensions 860×850×1,082 mm (including squeegee), weight 150 kg, 55 cm cleaning width, 60-liter clean water tank, 47-liter wastewater tank, 21,000 Pa suction, 30-second post-scrub floor drying, triple-roller dry-wet separation design, 11.6-inch interactive screen, and 4-hour charge time.
What should be checked before ordering KLEENBOT C55?
Exact robot model, revision and manufacturer part reference; Payload, reach, mobility, speed or working-envelope requirements relevant to the application; Battery, charging, runtime and power requirements where applicable.
Are all KLEENBOT C55 configurations identical?
No. Hardware revision, software, accessories, modules, handpieces, probes or other options can vary. The written quotation and exact-unit identification should define the supplied configuration.
What is included with KLEENBOT C55?
Only items explicitly listed in the quotation and packing scope should be treated as included. Reference photographs can show accessories or system components that are not part of the final offer.
Can KLEENBOT C55 be shipped internationally?
International B2B delivery can be arranged for approved destinations subject to product-specific transport requirements, customs rules and the agreed freight, insurance and delivery terms.
KEENON documentation for KLEENBOT C55
Manufacturer names and trademarks are used for product identification. Confirm model-specific instructions, compatibility and regional requirements before use.
Procurement support for KLEENBOT C55
Model, label/serial information, condition and supplied configuration can be confirmed before dispatch.
Quotation, packing scope, warranty terms and delivery responsibilities are documented before order approval.
Export packing, freight, insurance and shipment documentation can be coordinated for approved destinations.
Support is available for configuration questions, installation planning and procurement documentation.
Request a quote for KLEENBOT C55
Include delivery country, quantity, required configuration and target purchase date for a destination-specific offer.
