Tintec TL2P Throw Hook for Autel EVO MAX 4 Series
Tintec TL2P Throw Hook for Autel EVO MAX 4 Series is a Drone Camera / Payload from Tintec. Compatibility: EVO MAX 4T/4N/4XE • Control interface: Light-sensitive trigger • Number of hooks: 2 • Single hook load: 0.5 kg • Maximum load: 1 kg • Throwing method: Single throw | full throw • Weight: 153 g
Tintec TL2P Throw Hook for Autel EVO MAX 4 Series technical overview
Tintec TL2P Throw Hook for Autel EVO MAX 4 Series is a Drone Camera / Payload from Tintec. Compatibility: EVO MAX 4T/4N/4XE • Control interface: Light-sensitive trigger • Number of hooks: 2 • Single hook load: 0.5 kg • Maximum load: 1 kg • Throwing method: Single throw | full throw • Weight: 153 g
TL2P Highlights • Dual-hook setup: Supports controlled release of two independent lightweight payloads.
Before purchase, confirm the exact model or part number, configuration, compatible accessories and included scope against the written quotation and manufacturer documentation.
Three checks before purchase
Match the manufacturer model, part number and product-label details to the quotation.
Review system, accessory, software, power and installation requirements that apply to this product.
Confirm included items, condition, warranty, documentation and delivery terms before payment.
Tintec TL2P Throw Hook for Autel EVO MAX 4 Series images
Use the product media and exact-unit photographs supplied with the quotation to confirm model, configuration and condition.
Important Tintec TL2P Throw Hook for Autel EVO MAX 4 Series details
These points summarize model-specific technical information available for product evaluation.
Compatibility: EVO MAX 4T/4N/4XE • Control interface: Light-sensitive trigger •
Compatibility: EVO MAX 4T/4N/4XE • Control interface: Light-sensitive trigger • Number of hooks: 2 • Single hook load: 0.5 kg • Maximum load: 1 kg • Throwing method: Single throw | full throw • Weight: 153 g
TL2P Highlights • Dual-hook setup: Supports controlled release of two independent
TL2P Highlights • Dual-hook setup: Supports controlled release of two independent lightweight payloads.
Maximum load: 1 kg
Maximum load: 1 kg
Single hook load: 0.5 kg
Single hook load: 0.5 kg
0.5 kg per-hook limit: Safely carries small mission-critical items securely
0.5 kg per-hook limit: Safely carries small mission-critical items securely.
Where Tintec TL2P Throw Hook for Autel EVO MAX 4 Series can fit
Suitability depends on the exact configuration, compatible systems, intended professional use and manufacturer instructions.
UAS payload integration
Evaluate Tintec TL2P Throw Hook for Autel EVO MAX 4 Series for compatible aircraft and mission workflows supported by its exact interface, power and payload requirements.
Inspection and data capture
Match camera, thermal, LiDAR, spotlight, speaker or sensor capability to the intended workflow.
Platform compatibility
Confirm supported aircraft, gimbal/port interface, firmware, controller and application requirements.
Mission readiness
Verify mounting hardware, cables, storage media, environmental rating and included accessories.
Tintec TL2P Throw Hook for Autel EVO MAX 4 Series specifications and identification
The table summarizes confirmed model and technical information from product specifications and available technical documentation. Configuration-sensitive values should be checked against the exact supplied unit.
- Product
- Tintec TL2P Throw Hook for Autel EVO MAX 4 Series
- Manufacturer / brand
- Tintec
- Model / part reference
- Tintec TL2P Throw Hook for Autel EVO MAX 4 Series
- Equipment type
- Drone Camera / Payload
- Strap-on mounting
- Installs quickly without tools or structural modification.
- Control interface
- Light-sensitive trigger
- Weight
- 153 g
What to verify before ordering Tintec TL2P Throw Hook for Autel EVO MAX 4 Series
Use this checklist to reduce model, configuration and integration mismatches.
- Exact payload/accessory model and manufacturer part number
- Supported aircraft and gimbal/port or electrical interface
- Firmware, controller and application compatibility
- Power, weight, mounting and payload-capacity limits
- Environmental rating and mission-specific operating limits
- Included cables, brackets, storage media and other accessories
Tintec TL2P Throw Hook for Autel EVO MAX 4 Series manufacturer and technical resources
Manufacturer, regulator and other authoritative references are prioritized for product verification.
Technical documentation
Request model documentation and exact configuration information for the supplied unit.
Frequently asked questions
Key questions for evaluating Tintec TL2P Throw Hook for Autel EVO MAX 4 Series before purchase.
What is Tintec TL2P Throw Hook for Autel EVO MAX 4 Series?
Compatibility: EVO MAX 4T/4N/4XE • Control interface: Light-sensitive trigger • Number of hooks: 2 • Single hook load: 0.5 kg • Maximum load: 1 kg • Throwing method: Single throw | full throw • Weight: 153 g
What should be checked before ordering Tintec TL2P Throw Hook for Autel EVO MAX 4 Series?
Exact payload/accessory model and manufacturer part number; Supported aircraft and gimbal/port or electrical interface; Firmware, controller and application compatibility.
Are all Tintec TL2P Throw Hook for Autel EVO MAX 4 Series configurations identical?
No. Hardware revision, software, accessories, modules, handpieces, probes or other options can vary. The written quotation and exact-unit identification should define the supplied configuration.
What is included with Tintec TL2P Throw Hook for Autel EVO MAX 4 Series?
Only items explicitly listed in the quotation and packing scope should be treated as included. Reference photographs can show accessories or system components that are not part of the final offer.
Can Tintec TL2P Throw Hook for Autel EVO MAX 4 Series be shipped internationally?
International B2B delivery can be arranged for approved destinations subject to product-specific transport requirements, customs rules and the agreed freight, insurance and delivery terms.
Tintec documentation for Tintec TL2P Throw Hook for Autel EVO MAX 4 Series
Manufacturer names and trademarks are used for product identification. Confirm model-specific instructions, compatibility and regional requirements before deployment.
Procurement support for Tintec TL2P Throw Hook for Autel EVO MAX 4 Series
Model, part number, condition and supplied configuration can be confirmed before dispatch.
Quotation, packing scope, warranty terms and delivery responsibilities are documented before order approval.
Export packing, freight, insurance and shipment documentation can be coordinated for approved destinations.
Support is available for compatibility questions, installation planning and procurement documentation.
Request a quote for Tintec TL2P Throw Hook for Autel EVO MAX 4 Series
Include delivery country, quantity, required configuration and target purchase date for a destination-specific offer.
