Contact-aware grasping
Touch feedback gives the policy physical evidence that contact occurred rather than relying only on camera data and commanded finger positions.
Unitree G1 Edu Ultimate F U8 Humanoid Robot (G1EDU-U8)
$40,500.00
Unitree G1 Edu Ultimate F U8 Humanoid Robot (G1EDU-U8) is a humanoid robot from UNITREE ROBOTICS. It builds on the G1 EDU Plus body — providing up to 41 to 43 total degrees of freedom, 3-DOF waist, 7-DOF arms, and 6-DOF legs — with NVIDIA Jetson Orin (100 TOPS) AI compute, LIVOX MID-360 3D LiDAR, Intel RealSense D435i depth camera, dual encoders per.
Review the model information, technical details, compatibility, included configuration and documentation before requesting a destination-specific B2B quotation.
Explore Related
Related products, categories and research.
Unitree G1 EDU Ultimate F U8 (G1EDU-U8) is the tactile BrainCo configuration in the G1 EDU Ultimate range. It combines the current 29-DOF G1 EDU body with two BrainCo Revo2 Touch five-finger hands for a current market specification of 41 active DOF, secondary-development access, tactile manipulation research and a 100-TOPS-class onboard AI compute configuration.
41-DOF tactile five-finger G1 EDU
Unitree G1 EDU Ultimate F U8 for Sale: Revo2 Touch, 41 DOF & Buyer Guide
Unitree G1 EDU Ultimate F U8 is designed for robotics laboratories, universities, embodied-AI teams and advanced developers that need both whole-body humanoid control and tactile five-finger manipulation. The U8 uses the expanded 29-DOF G1 EDU body with a 3-DOF waist and 7-DOF arms, then adds two BrainCo Revo2 Touch dexterous hands.
The current G1 29-DOF body architecture is defined by Unitree as six DOF per leg, three DOF at the waist and seven DOF per arm. Each BrainCo Revo2 Touch hand uses 11 mechanical degrees of freedom with 6 active actuators. Using the active-joint convention used by current U8 sellers, the complete configuration is 41 active DOF.
The main reason to choose U8 over U7 is not simply “more fingers.” Both use humanlike five-finger Revo2 hands. U8 moves to the Revo2 Touch tactile tier, adding physical-contact data for advanced manipulation, tactile policy learning and contact-aware teleoperation.
This commercial U8 tier is commonly listed with 100-TOPS NVIDIA Jetson Orin compute, secondary-development support, depth camera + 3D LiDAR sensing, Wi-Fi 6, Bluetooth 5.2, a 9000 mAh quick-release battery and approximately two hours of manufacturer-reference battery life.
Important procurement point: Unitree publishes the G1 EDU family specification rather than every U1–U8 reseller bundle. The written quotation should therefore confirm G1EDU-U8, the exact BrainCo Revo2 Touch revision, compute module, sensor part numbers, firmware, accessories and final commercial scope.
41 DOFCurrent active-joint total
5 fingersPer Revo2 Touch hand
TactileContact-aware manipulation
100 TOPSCommon U8 compute tier
~2 hoursBattery reference
18 monthsOfficial G1 EDU warranty
Price and availability
Unitree G1 EDU Ultimate F U8 Price and Current Market Position
The live WooCommerce price shown in the purchase area above this description is the current AI Robot Supplier commercial reference for this exact listing. Because store pricing can change independently from the long description, this buyer guide does not hard-code an unverified AI Robot Supplier price that could become stale.
For market context, current specialist listings place the U8 in the high-$60,000 range. Robots International currently lists G1EDU-U8 at approximately $67,500, while RobotLAB and Toborlife list comparable G1 EDU Ultimate F configurations at approximately $67,900.
| Seller / reference | Observed U8 price | Commercial note |
|---|---|---|
| AI Robot Supplier | See live price above | Current WooCommerce price controls this listing |
| Robots International | ~$67,500 | Current public G1EDU-U8 listing |
| RobotLAB | ~$67,900 | 41 DOF, BrainCo Revo2 tactile configuration |
| Toborlife | ~$67,900 | 41 DOF, Revo2 Touch, 18-month warranty |
Do not compare U8 only by headline price. A proper quotation should identify the exact tactile-hand revision, onboard compute, controller, battery, charger, development access, warranty, shipping method and any integration or training services.
What can change the delivered U8 cost?
- Destination country, freight, insurance and customs clearance
- Exact BrainCo Revo2 Touch hardware revision
- NVIDIA Jetson Orin module supplied in the final configuration
- Additional batteries, chargers, gantry or transport equipment
- Teleoperation hardware and cameras
- Integration, training and development-support requirements
Product overview
What Is the Unitree G1 EDU Ultimate F U8?
Unitree G1 EDU Ultimate F U8 is a premium tactile-manipulation configuration in the G1 EDU family. It takes the programmable G1 EDU platform and pairs it with two BrainCo Revo2 Touch five-finger hands rather than fixed hands, three-finger Dex3-1 hands or non-tactile five-finger alternatives.
The body retains the compact G1 format: approximately 1320 × 450 × 200 mm standing, 690 × 450 × 300 mm folded and about 35 kg-plus with battery in EDU form. Unitree’s official G1 EDU table specifies 120 N·m maximum knee-joint torque, about 3 kg maximum arm-load reference, a 9000 mAh quick-release battery, depth camera + 3D LiDAR and official secondary-development support.
U8’s differentiator is tactile manipulation. Current U8 seller matrices consistently identify Ultimate F / U8 as the BrainCo Revo2 Touch configuration, while U7 is the Revo2 Basic configuration without tactile sensing.
This makes U8 the stronger choice when contact itself is part of the research problem: detecting that an object has been touched, adjusting grip after contact, studying slip or directional force, or training policies that use touch together with vision and joint state.
Three checks before ordering U8
1
Confirm Revo2 Touch
The quotation should state Touch rather than Revo2 Basic.
2
Confirm exact tactile hardware
Record the supplied Revo2 Touch revision and tactile channels required by the project.
3
Confirm development stack
Verify Unitree SDK2, ROS 2, BrainCo SDK, Jetson module, firmware and sensor interfaces.
Product media
Unitree G1 EDU Ultimate F U8 Images
The old description also used two files whose filenames explicitly referenced G1 Basic. Those have been removed here to reduce the risk of showing Basic-model imagery as U8-specific media.
Verified configuration
Unitree G1 EDU Ultimate F U8 Specs and Technical Specifications
This table separates Unitree’s official G1 EDU body specifications from U8-specific BrainCo hand and current seller-configuration information.
| Model / configuration | G1 EDU Ultimate F / G1EDU-U8 |
|---|---|
| Standing dimensions | 1320 × 450 × 200 mm |
| Folded dimensions | 690 × 450 × 300 mm |
| Weight with battery | About 35 kg+ for G1 EDU |
| Current U8 active DOF | 41 |
| Body DOF | 29: 12 leg + 3 waist + 14 arm/wrist |
| Hand model | 2 × BrainCo Revo2 Touch five-finger hands |
| Revo2 mechanical DOF | 11 per hand |
| Revo2 active DOF | 6 per hand |
| Tactile capability | Yes — Revo2 Touch tactile sensing; exact sensor revision should be confirmed |
| Maximum knee torque | 120 N·m official G1 EDU reference |
| Arm-load reference | About 3 kg; strongly posture dependent |
| Joint encoders | Dual encoder |
| Primary compute | 8-core high-performance CPU |
| High-compute module | Current U8 commercial packages commonly list NVIDIA Jetson Orin 100 TOPS; confirm exact module |
| Perception | Depth camera + 3D LiDAR |
| Common specialist sensor references | Livox MID-360 + Intel RealSense D435i are commonly listed; confirm delivered part numbers |
| Audio | 4-microphone array + 5 W speaker |
| Wireless | Wi-Fi 6 + Bluetooth 5.2 |
| Battery | 9000 mAh quick-release smart battery |
| Charger | 54 V / 5 A |
| Battery life | About 2 hours manufacturer reference |
| Manual controller | Yes in official G1 EDU accessory table |
| Secondary development | Supported |
| Manufacturer warranty reference | 18 months for G1 EDU |
Important correction: the previous description listed a 12-month warranty and described U8 as “41 to 43 DOF.” Unitree’s current official G1 table states 18 months for G1 EDU, while current U8 configuration tables from multiple specialist sellers identify Ultimate F / U8 as 41 active DOF.
Tactile manipulation
BrainCo Revo2 Touch Hands on Unitree G1 Ultimate F U8
The hands are the reason U8 exists as a separate commercial configuration. BrainCo Revo2 Touch combines humanlike five-finger kinematics with a developer ecosystem that includes Python/C++ SDK resources, ROS 2 drivers, digital robot assets and direct Unitree G1 integration.
BrainCo and current U8 sellers distinguish Revo2 Touch from Revo2 Basic by the tactile layer. Current commercial descriptions commonly identify tactile channels for pressure/normal force, friction or tangential force, force direction and proximity. Exact tactile hardware and API behavior can vary by hand revision, so a serious purchase specification should name the supplied Revo2 Touch version rather than merely saying “tactile hand.”
Directional-force research
Supported Touch data can help study grip adjustment, shear interaction and object stability.
Proximity-assisted interaction
Supported Revo2 Touch revisions can expose proximity-related information around finger contact.
Fragile-object handling
Tactile feedback adds another information channel for research into compliant and delicate manipulation.
Teleoperation datasets
Five-finger motion plus touch data can enrich manipulation demonstrations used for robot learning.
Multimodal embodied AI
Researchers can combine vision, joint state and touch instead of asking a policy to infer all physical contact from cameras.
Hand integration and control
Unitree publishes a BrainCo hand service that converts Revo2 serial communication into Unitree DDS topics for use with Unitree SDK2 and Unitree SDK2 Python. The service identifies six commanded finger channels per hand: thumb, auxiliary thumb, index, middle, ring and pinky.
BrainCo’s own current G1 integration repository supports both 23-DOF and 29-DOF G1 bodies, dual-arm/dual-hand ROS 2 control, Unitree SDK installation, BrainCo SDK installation and hand-eye calibration workflows.
Performance context
Payload, Runtime, Mobility and Practical U8 Limits
Unitree G1 EDU Ultimate F U8 is an advanced research platform, not a guaranteed turnkey warehouse worker. Unitree itself cautions that humanoid robotics remains at an early stage and that some sample functions shown in G1 marketing are still under development or testing.
The official G1 EDU arm-load reference is approximately 3 kg, and Unitree explicitly states that load capability varies greatly with extension posture. A 3 kg object held close to the torso is mechanically different from the same object held far forward.
Unitree lists about two hours of battery life for G1. Practical U8 research sessions can be shorter depending on locomotion, high-compute workload, LiDAR/depth processing, hand activity and tactile data logging. Spare-battery planning matters for laboratories running long data-collection sessions.
Maximum mobility is not the main reason to buy U8. Contact-rich manipulation work typically prioritizes stable stance, controlled whole-body motion, careful approach speed and sufficient human safety clearance.
Software and secondary development
Unitree G1 U8 SDK, ROS 2, BrainCo Touch Data and Teleoperation
Unitree officially marks G1 EDU as supporting secondary development. That is a fundamental distinction from standard G1 Basic.
Unitree maintains SDK2, Python interfaces, current G1 robot descriptions and XR teleoperation software. The current Unitree XR teleoperation repository explicitly supports the G1 29-DOF body and BrainCo dexterous hands.
BrainCo separately maintains an actively updated Unitree G1 + Revo2 integration repository. Its current documentation covers 23-DOF and 29-DOF G1 bodies, ROS 2 dual-arm/dual-hand control, camera calibration and direct BrainCo hand SDK integration.
For U8, developers should think in four software layers:
- Unitree body control — locomotion, waist and arm joints through Unitree development interfaces.
- BrainCo hand control — five-finger command, state and feedback using BrainCo/Unitree integration software.
- Tactile acquisition — reading touch data appropriate to the exact Revo2 Touch hardware revision.
- Policy layer — teleoperation, imitation learning, reinforcement learning or vision-language-action policies coordinating body, hands and perception.
The 100-TOPS-class onboard compute should be treated mainly as robot-side inference and development compute. Large-scale foundation-model training and heavy reinforcement-learning workloads usually belong on external GPU workstations or servers.
Perception and sensor fusion
LiDAR, Depth Vision, Audio and Tactile Fusion
Unitree’s official G1 EDU specification lists Depth Camera + 3D LiDAR, a four-microphone array, 5 W speaker, Wi-Fi 6 and Bluetooth 5.2. Current specialist U8 pages commonly identify Livox MID-360 and Intel RealSense D435i, but the exact delivered sensor part numbers should be confirmed when a software stack depends on a specific driver or calibration file.
U8’s research advantage is the possibility of combining external perception with contact perception: a camera can identify an object, depth/LiDAR can place the robot in space, joint encoders can track configuration, and the hands can provide tactile evidence that physical interaction occurred.
Configuration choice
Unitree G1 Ultimate F U8 vs U7, U6 and U2
| Configuration | Active DOF | Hands | Tactile | Best fit |
|---|---|---|---|---|
| U2 / EDU Plus | 29 | Fixed hands | No | Whole-body development without dexterous-hand research |
| U6 / Ultimate D | 41 | Tactile Inspire 5-finger | Yes | Inspire ecosystem + tactile manipulation |
| U7 / Ultimate E | 41 | BrainCo Revo2 Basic | No | BrainCo manipulation without tactile complexity |
| U8 / Ultimate F | 41 | BrainCo Revo2 Touch | Yes | Touch-aware manipulation, tactile policies and multimodal research |
Choose U2 when the primary work is locomotion, perception, HRI or whole-body control and articulated fingers are unnecessary.
Choose U7 when you want BrainCo five-finger mechanics and SDK support but tactile data is not necessary. It is the closest direct alternative to U8.
Choose U6 when you specifically prefer the Inspire tactile-hand ecosystem.
Choose U8 when the research question depends on physical-contact data and you want the BrainCo software ecosystem.
Who should buy it?
Best-Fit Buyers for Unitree G1 EDU Ultimate F U8
Embodied-AI laboratories
Teams developing policies that combine locomotion, vision, manipulation and touch.
Manipulation researchers
Projects studying grasp adaptation, contact state, slip, force direction and tactile control.
Teleoperation and dataset teams
Groups collecting humanoid demonstrations with body, hand and tactile channels.
University robotics programs
Graduate-level research where secondary-development access and real robot hardware are required.
Industrial R&D
Pre-deployment investigation of contact-rich tasks before selecting a production automation system.
AI model developers
Teams testing multimodal policies on a physical humanoid rather than simulation alone.
Who should choose another configuration?
If tactile data is not part of the research objective, U7 can be a simpler BrainCo route. If five-finger manipulation itself is unnecessary, U2 is simpler still. If the application requires a proven production worker with guaranteed industrial cycle times, U8 should be evaluated as an R&D platform rather than assumed to be turnkey production automation.
Package verification
What Is Commonly Included With G1 EDU Ultimate F U8?
At platform level, Unitree’s G1 EDU specification includes the robot, 9000 mAh quick-release battery, 54 V / 5 A charger and manual controller. U8 adds two BrainCo Revo2 Touch hands and the higher-compute development configuration represented by the commercial U8 package.
G1 EDU Ultimate F body
29-DOF EDU body architecture with secondary-development access.
2 × Revo2 Touch hands
Five-finger BrainCo dexterous hands with tactile capability.
Core accessories
Battery, charger and manual controller are part of the official G1 EDU accessory reference; the final packing list controls the order.
Do not assume spare batteries, a transport case, debugging gantry, external cameras, XR headset, motion-capture gloves or installation services are included unless they are written into the quotation.
International procurement
Shipping, Import and Delivery Considerations
Humanoid robots should be quoted by destination because freight, insurance, import procedures and local taxes can materially change delivered cost. Unitree’s own price references exclude tax and shipping, and U8 is a higher-value EDU configuration that warrants a written logistics scope.
- Confirm delivery country and postal code before the final quotation.
- Ask whether freight and insurance are included.
- Confirm the agreed Incoterm rather than assuming duties or VAT are included.
- Record who is responsible for customs clearance and destination taxes.
- Confirm packaging and battery-shipping requirements.
- Request the expected dispatch window and delivery estimate in writing.
Firmware and cybersecurity
G1 EDU Security Advisory: What U8 Buyers Should Verify
Security advisories published in August 2026 identify Unitree G1 EDU firmware through version 1.5.2 in connection with CVE-2026-76639 and CVE-2026-76640. Because U8 is a G1 EDU configuration, professional buyers should include firmware and network-security review in commissioning.
The disclosures do not mean every newly supplied U8 remains vulnerable. They do mean firmware version, available updates and network design should be checked rather than assumed.
- Confirm the exact G1 EDU firmware version before deployment.
- Ask for current manufacturer security-update guidance.
- Document Wi-Fi, Bluetooth and development-network exposure.
- Segment research robots appropriately on university or enterprise networks.
- Review BrainCo hand firmware and SDK dependencies as part of the same software inventory.
Purchase checklist
What to Verify Before You Buy Unitree G1 EDU Ultimate F U8
- Exact SKU: G1EDU-U8 / G1 EDU Ultimate F.
- Active-joint total: confirm the current 41-DOF configuration.
- Hands: confirm two BrainCo Revo2 Touch hands, not Revo2 Basic.
- Tactile revision: record the exact BrainCo Touch hardware type and required tactile channels.
- Compute: confirm the specific NVIDIA Jetson Orin module and 100-TOPS-class configuration.
- Sensors: confirm exact depth-camera and LiDAR part numbers when software depends on them.
- Battery: confirm the number of 9000 mAh batteries included.
- Charger: confirm 54 V / 5 A charger and destination plug/voltage arrangements.
- Controller: confirm the handheld controller in the packing list.
- Development stack: confirm Unitree SDK2, ROS 2, BrainCo SDK and teleoperation workflow.
- Firmware: verify current G1 EDU and BrainCo hand firmware.
- Warranty: official G1 EDU family reference is 18 months; final commercial terms should match the written quotation.
- Shipping: document freight, insurance, customs, taxes, import clearance and Incoterm.
Need a tactile G1 research quotation?
Send the delivery country, quantity, tactile-data requirements, manipulation goals and development workflow so the exact U8 package can be confirmed.
Developer resources
Official Unitree and BrainCo Resources for G1 U8
- Unitree G1 official specifications
- Unitree SDK2
- Unitree BrainCo hand service
- Unitree XR teleoperation
- BrainCo G1 + Revo2 integration
- BrainCo Revo2 Touch Right Hand on AI Robot Supplier
No exact U8-specific official Unitree video was verified during this audit, so this page deliberately avoids embedding a general G1 family video and presenting it as U8-specific footage.
Buyer questions
Unitree G1 EDU Ultimate F U8 FAQ
High-intent answers for buyers comparing price, tactile hands, development access, runtime, payload and shipping.
What is the Unitree G1 EDU Ultimate F U8?
U8 is a G1 EDU Ultimate configuration combining the current 29-DOF G1 EDU body with two BrainCo Revo2 Touch five-finger tactile hands for advanced manipulation and embodied-AI development.
How many degrees of freedom does G1EDU-U8 have?
Current U8 seller matrices identify 41 active DOF. The body contributes 29 active joints and each BrainCo Revo2 hand contributes 6 active finger channels. Hand documents may also describe a larger mechanical joint count, which is a different counting convention.
What is the Unitree G1 U8 price?
The current AI Robot Supplier price is displayed in the WooCommerce purchase area above this description. Current competitor U8 prices cluster around the high-$60,000 range before destination-specific tax, duty and freight.
What is the difference between U7 and U8?
Both use BrainCo Revo2 five-finger hands and the advanced G1 EDU body. U7 uses Revo2 Basic without tactile sensing; U8 uses Revo2 Touch with tactile capability.
What tactile information does Revo2 Touch provide?
Current BrainCo/U8 documentation describes tactile information including normal or pressure force, tangential/friction force, force direction and proximity-related sensing. Exact data channels depend on the supplied Touch hardware revision.
What is the G1 EDU arm payload?
Unitree lists about 3 kg maximum arm-load reference for G1 EDU and notes that actual capacity changes significantly with arm extension posture.
What compute does U8 use?
Current U8 commercial packages commonly specify NVIDIA Jetson Orin compute at 100 TOPS. Unitree’s official G1 EDU table describes the high-compute module as configuration-dependent, so the exact module should be confirmed on the quotation.
What sensors are on Unitree G1 U8?
Unitree officially specifies a depth camera and 3D LiDAR for G1 EDU. Current specialist U8 pages commonly identify Livox MID-360 and Intel RealSense D435i, but exact supplied part numbers should be confirmed.
How long does the G1 U8 battery last?
Unitree’s G1 reference is about two hours from the 9000 mAh quick-release battery. Real runtime varies with locomotion, hand activity, tactile logging, perception and compute workload.
Does U8 support ROS 2 and custom development?
Yes. G1 EDU supports secondary development, and current Unitree and BrainCo repositories provide ROS 2 and SDK tooling for 29-DOF G1 bodies and BrainCo hands.
What warranty applies to G1 EDU U8?
Unitree’s current official G1 specification lists an 18-month warranty reference for G1 EDU. The final commercial quotation should state the warranty terms applying to the supplied U8 system.
Can U8 be shipped internationally?
International shipment can be quoted for approved destinations. Buyers should confirm freight, insurance, customs, taxes, import clearance, battery-transport requirements and the agreed Incoterm before payment.
Are there security advisories for G1 EDU?
Yes. Published 2026 advisories identify G1 EDU firmware through version 1.5.2 in connection with CVE-2026-76639 and CVE-2026-76640. Buyers should verify current firmware and remediation guidance.
Is U8 a turnkey industrial worker?
No such claim should be assumed. U8 is a sophisticated research and development platform. Deployment readiness depends on software, task engineering, safety validation and the intended environment.
AI Robot Supplier
Procurement Support for Unitree G1 EDU Ultimate F U8
Hand revision, active DOF, compute, sensors, firmware and accessories can be confirmed before order approval.
Destination-specific pricing can document the exact package, freight and delivery responsibilities.
Export packing, freight, insurance and shipment documentation can be coordinated for approved destinations.
Compare U8 against U7, U6, U5 and U2 based on tactile sensing and development requirements rather than model name alone.
Tactile humanoid quotation
Buy Unitree G1 EDU Ultimate F U8 With the Correct Revo2 Touch Configuration
Send your delivery country, quantity, tactile-data requirements, manipulation goals and development workflow to confirm current price, availability and exact supplied U8 package.
